2022-12-15 17:23 bernlohr * generic_run.sh (1.57): Avoid extra quotes on command line for viewing ring parameter. 2022-12-15 17:22 bernlohr * hess/hess_defaults.h (1.152): Re-activate the viewing ring offset parameter. 2022-12-13 17:41 bernlohr * hess/Makefile.hess (1.310), multi/multi_phase2d_diffuse.cfg (1.1): Distinct multipipe configuration to be used with diffuse sources. 2022-12-13 17:40 bernlohr * generic_run.sh (1.56): Add weak_transmission feature, allowing sim_telarray configuration files to more easily control the transmission table on their own. 2022-12-12 18:41 bernlohr * corsika/: Copyright (1.15), Makefile.dist (1.91), README (1.109), README.tex (1.98), iact.c (1.142), iact_full5.c (1.144), sampling.c (1.11): Release for version 1.65, fixing the recognition and processing of 2D importance sampling tables. 2022-12-12 17:48 bernlohr * cfg/CTA/CTA-PROD6-Paranal-div0.0022_20deg_north.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.0022_20deg_south.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.0043_20deg_north.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.0043_20deg_south.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.008_20deg_north.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.008_20deg_south.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.01135_20deg_north.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.01135_20deg_south.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.01453_20deg_north.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-div0.01453_20deg_south.cfg (1.1), multi/multi_cta-prod6-paranal-divergent-20deg-north.cfg (1.1), multi/multi_cta-prod6-paranal-divergent-20deg-south.cfg (1.1): Add config files for divergent pointing (limited to 20 deg N/S, by OG). 2022-12-10 00:15 bernlohr * .cvsignore (1.5), cfg/.cvsignore (1.2), cfg/CTA/.cvsignore (1.1), cfg/hess/.cvsignore (1.1), cfg/hess2/.cvsignore (1.1), corsika/.cvsignore (1.5), multi/.cvsignore (1.1), param_comp/.cvsignore (1.2): More complete set of files to ignore with CVS. 2022-12-09 23:50 bernlohr * corsika/Makefile.dist (1.90): Add latest (experimental) language standards to C and C++ compile tests. 2022-12-09 23:20 bernlohr * corsika/: Makefile.dist (1.89), README (1.108), README.tex (1.97): Update README for 2nd test version of 1.65. 2022-12-09 22:53 bernlohr * cfg/common/: nsb_spectrum_fullmoon.dat (1.1), nsb_spectrum_halfmoon.dat (1.1), nsb_spectrum_moonless.dat (1.1), nsb_spectrum_moonless_60deg.dat (1.1), skycalc_0.25moon.dat (1.1): Add some older SkyCalc-generated NSB spectra to CVS. 2022-12-09 22:47 bernlohr * hess/Makefile.hess (1.309), util/Makefile (1.19): Fix for linking auxiliary programs with stdtools in partial builds. 2022-12-09 22:45 bernlohr * common/sim_telarray.c (1.187): In addition to CPU time also show total numbers of images and events processed. 2022-12-09 22:43 bernlohr * multi/multi_phase2d.cfg (1.5): Declare lines for off-axis as optional. 2022-12-09 22:41 bernlohr * corsika/: iact.c (1.141), sampling.c (1.10): Fix incorrect identification and handling of of 2D importance sampling tables. 2022-12-08 20:17 bernlohr * common/sim_telarray.c (1.186): Report per-process CPU time at the end of sim_telarray. 2022-12-08 18:12 bernlohr * common/: rndm_table.c (1.8), rpolator.c (1.26), sim_config.c (1.226): Fix new warnings by GCC 12. 2022-12-08 18:12 bernlohr * generic_run.sh (1.55): Allow user-defined formatting of run numbers in output filenames. Try with turning +zenith-angles offsets into ring offsets. 2022-12-08 18:09 bernlohr * multi/multi_phase2d.cfg (1.4): Set multipipe config for HESS back to old list of offset angles. 2022-11-25 16:58 bernlohr * common/sim_telarray.c (1.185), util/multipipe_corsika.c (1.26): Fixing sequential mode with multipipe_corsika. 2022-11-25 16:58 bernlohr * cfg/hess2/hess-phase2d.cfg (1.32): HESS config update for phase2d3 (not final yet). 2022-11-22 16:18 bernlohr * common/sim_config.c (1.225), hess/Makefile.hess (1.308): Change auto-generated VERSION date/time strings to UTC timezone (and try handle non-UTC/non-local timezones nevertheless). 2022-10-24 21:16 bernlohr * run_sim_hessarray_generic (1.6): Extend configuration name by environment variable. Use environment variable to set multipipe config path. 2022-10-24 21:15 bernlohr * generic_run.sh (1.54): Global NSB scaling by environment variable. 2022-10-20 18:02 bernlohr * corsika/: Makefile.dist (1.88), atmo.c (1.53), corsika.dox (1.43), corsika_build_script (1.15), gen_config (1.22), iact.c (1.140), iact_full5.c (1.143): Automatic build with optimized Cherenkov version is still incomplete. 2022-10-20 17:46 bernlohr * sim_hessarray.dox (1.28), doc_src/sim_hessarray.tex (1.140): Minor documentation updates. 2022-10-20 16:03 bernlohr * hess/sim_conv2hess.c (1.138): Fix calculation of the global time when readout starts. 2022-10-07 12:14 bernlohr * common/sim_telarray.c (1.184): Report (with '--version') a few more preprocessor definitions in use during compile-time. 2022-09-01 23:31 tag prod6beta1 2022-09-01 23:31 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.33, prod6beta1): Shift pulses later by 5 ns since traces started too early. 2022-07-29 10:19 bernlohr * common/mc_aux.h (1.208), common/sim_config.c (1.224), common/sim_histograms.c (1.31), common/sim_telarray.c (1.183), doc_src/sim_hessarray.tex (1.139), hess/hess_defaults.h (1.151), hess/sim_conv2hess.c (1.137) (utags: prod6beta1): The photo-electron list from internal calibration events can be recorded, on explicit request only, for backward compatibility, and gets enclosed in its own enveloped, like the calibration events themselves. 2022-07-26 15:43 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.32): SCT mirror_offset parameter estimated from drawing. 2022-07-17 23:30 bernlohr * corsika/corsika_build_script (1.14, prod6beta1): A blank was missing in a test. 2022-07-17 16:48 bernlohr * util/multipipe_corsika.c (1.25, prod6beta1): We need one more field for optional flags or the last pipe would not get recognized as optional. 2022-07-17 16:42 bernlohr * multi/: multi_cta-prod6-lapalma-7tel.cfg (1.3), multi_cta-prod6-lapalma.cfg (1.3), multi_cta-prod6-lst.cfg (1.3), multi_cta-prod6-mst-fc.cfg (1.3), multi_cta-prod6-mst-nc.cfg (1.3), multi_cta-prod6-paranal-7tel.cfg (1.3), multi_cta-prod6-paranal.cfg (1.3), multi_cta-prod6-sct.cfg (1.3), multi_cta-prod6-sst.cfg (1.3) (utags: prod6beta1): Mark all prod-6 multipipe configuration lines with '--if-with-moon' as optional commands. That requires to use an up-to-date multipipe_corsika. 2022-07-17 16:37 bernlohr * Cameras/Makefile (1.11), LightEmission/Makefile (1.24), hess/Makefile.hess (1.307), util/Makefile (1.18) (utags: prod6beta1): Makefile fixes. 2022-07-17 16:36 bernlohr * util/multipipe_corsika.c (1.24): Add reminders that broken pipes is not always because of errors, in particular where pipes are marked by a leading 'optional:' in the 'multi' configuration file. 2022-07-17 13:05 bernlohr * sim_hessarray.dox (1.27, prod6beta1): Updating to current doxygen version. 2022-07-16 22:18 bernlohr * param_comp/p6check.sh (1.1, prod6beta1): Add a script testing if telescope configurations differ between single telescope configuration and configuration as part of the Paranal or La Palma array. 2022-07-16 22:08 bernlohr * cfg/: CTA/CTA-PROD6-FlashCam-camera.cfg (1.9, prod6beta1), CTA/CTA-PROD6-LST-prototype.cfg (1.5, prod6beta1), CTA/CTA-PROD6-LST.cfg (1.19, prod6beta1), CTA/CTA-PROD6-LaPalma.cfg (1.5, prod6beta1), CTA/CTA-PROD6-MST-NectarCam.cfg (1.15, prod6beta1), CTA/CTA-PROD6-MST-optics.cfg (1.9, prod6beta1), CTA/CTA-PROD6-Paranal.cfg (1.7, prod6beta1), CTA/CTA-PROD6-SCT.cfg (1.31), CTA/CTA-PROD6-SST-ASTRI-optics.cfg (1.8, prod6beta1), CTA/CTA-PROD6-common.cfg (1.6, prod6beta1), MAGIC/MAGIC1.cfg (1.8, prod6beta1), MAGIC/MAGIC2.cfg (1.8, prod6beta1): Fix any difference in configurations between a telescope type configured by itself or configured as part of the array, even if the global configuration uses the LST type instead of the dummy type. For the SCT we can assume that the AXES_OFFSETS are as for the MSTS but we still need to check on the MIRROR_OFFSET. 2022-07-16 13:30 bernlohr * hess/cta_defaults.h (1.3, prod6beta1): Sync against hess_defaults.h 2022-07-16 03:56 bernlohr * cfg/CTA/CTA-PROD6-LaPalma-7tel.cfg (1.2, prod6beta1), cfg/CTA/CTA-PROD6-LaPalma.cfg (1.4), cfg/CTA/CTA-PROD6-MST-optics.cfg (1.8), cfg/CTA/CTA-PROD6-Paranal-7tel.cfg (1.2, prod6beta1), cfg/CTA/CTA-PROD6-Paranal.cfg (1.6), cfg/CTA/CTA-PROD6-SST-ASTRI-optics.cfg (1.7), cfg/CTA/CTA-PROD6-common.cfg (1.5), cfg/CTA/CTA-PROD6-metaparam.cfg (1.4, prod6beta1), hess/Makefile.hess (1.306): Use a dummy telescope configuration for the global configuration rather than an LST. Fix parameters where the LST values were taken over from the global configuration into telescope-specific values. 2022-07-16 03:24 bernlohr * cfg/: CTA/CTA-PROD6-dummy-tel.cfg (1.1), common/dummy_pulse.dat (1.1) (utags: prod6beta1): Add a dummy configuration, so that we do not depend on LST config for global values. 2022-07-15 13:58 bernlohr * Cameras/Makefile (1.10), LightEmission/Makefile (1.23), Mirrors/Makefile (1.3, prod6beta1), TestCases/Makefile (1.2, prod6beta1), util/Makefile (1.17): More uniform way how to locate paths to the other modules. Also try to link programs in a more Ubuntu-friendly way. 2022-07-15 13:57 bernlohr * common/mc_aux.h (1.207): Reduce comflicts when version variants get combined. 2022-07-12 02:25 bernlohr * common/: sim_histograms.c (1.30), sim_telarray.c (1.182): Add histograms and log messages to find the proper pulse placement more easily. 2022-07-12 02:22 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.30): Further tuning of SCT pulse placement. 2022-07-09 14:28 bernlohr * cfg/CTA/CTA-PROD6-LaPalma-test.cfg (1.3), cfg/CTA/CTA-PROD6-Paranal-test.cfg (1.3), cfg/CTA/array_trigger_prod6_lapalma_test.dat (1.2), cfg/CTA/array_trigger_prod6_paranal_test.dat (1.2), multi/multi_cta-prod6-lapalma-test.cfg (1.4), multi/multi_cta-prod6-paranal-test.cfg (1.3): The early test configuration for prod-6 is obsolete and removed. 2022-07-07 20:34 bernlohr * generic_run.sh (1.53, prod6beta1): Since the availability of zstd still cannot be guaranteed, we check first and fall back to gzip or no compression if necessary. 2022-07-05 20:50 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.29): SCT threshold fine-tuning after pulse shape shift. 2022-07-05 15:34 bernlohr * cfg/CTA/CTA-PROD6-LaPalma.cfg (1.3): Updating main La Palma prod-6 configuration for different numbers of MSTs and array trigger definition files adapting to that. 2022-07-05 15:30 bernlohr * cfg/common/: atm_trans_2156_1_0_0_0_0.dat (1.1), atm_trans_2156_1_10_0_0_0.dat (1.1), atm_trans_2156_1_1_0_0_0.dat (1.1), atm_trans_2156_1_1_0_0_2156.dat (1.1), atm_trans_2156_1_3_0_0_0.dat (1.1), atm_trans_2156_1_3_0_0_0_0.1.dat (1.1), atm_trans_2156_1_3_0_0_0_0.1_0.1.dat (1.1), atm_trans_2156_1_3_1_0_0_0.1.dat (1.1), atm_trans_2156_1_3_1_0_0_0.1_0.1.dat (1.1), atm_trans_2156_1_3_2_0_0.dat (1.1), atm_trans_2156_1_3_2_0_0_0.1.dat (1.1), atm_trans_2156_1_3_2_0_0_0.1_0.1.dat (1.1), atm_trans_2156_1_4_0_0_0.dat (1.1), atm_trans_2156_1_6_0_0_0.dat (1.1) (utags: prod6beta1): New atmospheric transmission files for La Palma, at a marginally lower altitude than used in the past. 2022-07-05 15:29 bernlohr * hess/Makefile.hess (1.305): Export new array trigger definitions for prod-6. 2022-07-05 15:25 bernlohr * cfg/CTA/: CTA-PROD6-LaPalma.cfg (1.2), CTA-PROD6-Paranal.cfg (1.5), CTA-PROD6-site.cfg (1.5, prod6beta1), array_trigger_prod6_lapalma.dat (1.2), array_trigger_prod6_lapalma_4_15_2.dat (1.1, prod6beta1), array_trigger_prod6_lapalma_4_39_2.dat (1.1, prod6beta1), array_trigger_prod6_paranal_4_25_50_0.dat (1.2, prod6beta1), array_trigger_prod6_paranal_4_25_50_25.dat (1.2, prod6beta1), array_trigger_prod6_paranal_4_33_50_0.dat (1.1, prod6beta1), array_trigger_prod6_paranal_4_33_50_33.dat (1.1, prod6beta1): Adding array trigger definitions for more alternate telescope positions and prepare main configuration file to handle either the old or the new number of telescopes, based on the total number of telescopes passed on the command line. 2022-07-02 18:20 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.28), cfg/CTA/waveform_1pe_SMART_12_04_2022s2.dat (1.1, prod6beta1), hess/Makefile.hess (1.304): The photon delay was left over from the original pulse shape with a late peak. Remove that. An even better response is obtained with a pulse starting to rise where it used to be in prod-3/4/5 (rather than the same peak positio). 2022-07-01 16:43 bernlohr * common/sim_config.c (1.223): If we want to export the EventIO version and release strings as metaparameters, we need to include the corresponding header first. 2022-07-01 15:49 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.18): Drop line superceding camera_config_variant near the end. 2022-07-01 15:27 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.17): Add optics and camera configuration variant strings. 2022-07-01 15:13 bernlohr * util/pfp.c (1.28, prod6beta1): Inserting a newline in the result of a math evaluation was not such a good idea. 2022-07-01 00:53 bernlohr * common/: mc_aux.h (1.206), sim_config.c (1.222), sim_telarray.c (1.181): Refresh calculation of approximate mirror area and diameter and report those as meta-parameters. 2022-06-30 13:53 bernlohr * cfg/CTA/CTA-PROD6-MST-FlashCam.cfg (1.9, prod6beta1), cfg/CTA/CTA-PROD6-MST-NectarCam.cfg (1.14), cfg/CTA/CTA-PROD6-MST-optics.cfg (1.7), cfg/CTA/ref_MST-North-MLT_2022_06_28.dat (1.1, prod6beta1), cfg/CTA/ref_MST-South-KS-1N_2022_06_28.dat (1.1, prod6beta1), hess/Makefile.hess (1.303): Update of MST mirror reflectivity curves from two manufacturers, one foreseen for each site. Results in a tiny changes of NSB rates. 2022-06-29 21:49 bernlohr * corsika/: README (1.107), README.tex (1.96) (utags: prod6beta1): Update README for June 2022 release (1.64). 2022-06-28 17:18 bernlohr * cfg/CTA/: CTA-PROD6-FlashCam-camera.cfg (1.8), CTA-PROD6-LST.cfg (1.16), CTA-PROD6-MST-NectarCam.cfg (1.13), CTA-PROD6-SCT.cfg (1.27), CTA-PROD6-SST-CHEC-S-camera.cfg (1.11, prod6beta1): Thresholds updated with result of the different evaluations. 2022-06-23 22:11 tag phase2d3 2022-06-23 22:11 bernlohr * cfg/hess2/hess-phase2d.cfg (1.31, prod6beta1, phase2d3): Updating CT1-4 discriminator thresholds following results by the MC Validation Group. 2022-06-23 13:23 bernlohr * common/sim_telarray.c (1.180), hess/sim_conv2hess.c (1.136): Internal calibration events either for the whole array in one event or each telescope by itself (if CALIB_EVENT_LOOP_BY_TEL defined). 2022-06-23 00:27 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.26), cfg/MAGIC/MAGIC1.cfg (1.7), cfg/MAGIC/MAGIC2.cfg (1.7), multi/multi_cta-prod6-magic1.cfg (1.2, prod6beta1), multi/multi_cta-prod6-magic2.cfg (1.2, prod6beta1): Fixing little typos. 2022-06-22 17:11 bernlohr * multi/: multi_cta-prod6-lapalma-7tel.cfg (1.2), multi_cta-prod6-paranal-7tel.cfg (1.2): Add '7tel' to output file name. 2022-06-22 16:35 bernlohr * .cvsignore (1.4, prod6beta1), cfg/.cvsignore (1.1, prod6beta1), hess/Makefile.hess (1.302): In the meantime there are too many files exported for CVS to check them all in one go. 2022-06-22 15:18 bernlohr * LightEmission/le_examples.sh (1.1), LightEmission/pixled_count.sh (1.1), cfg/CTA/singlepe_spectrum_norm_SCT_12_04_2022.dat (1.1), cfg/common/atm_trans_2147_1_10_2_0_2147.dat (1.1), cfg/hess/hess1u_camera.dat (1.1), cfg/hess/hess1u_disc_pulse_nojitter.dat (1.1), cfg/hess/hess1u_disc_pulse_nojitter_smoothed.dat (1.1), cfg/hess/hess1u_fadc_shape_deco0.888.dat (1.1), cfg/hess/hess1u_fadc_shape_no-deco.dat (1.1), doc_src/fig/parconvdiv.eps (1.1), doc_src/fig/parconvdiv.pdf (1.1), doc_src/fig/parconvdiv2.eps (1.1), doc_src/fig/parconvdiv2.pdf (1.1), multi/multi_cta-prod5-paranal-new-sst.cfg (1.1), multi/multi_cta-prod5-paranal-new.cfg (1.1) (utags: prod6beta1): Various files which are distributed but (most of them) not part of any production configuration did not make it into CVS so far. 2022-06-22 15:05 bernlohr * multi/: multi_cta-prod6-magic1.cfg (1.1), multi_cta-prod6-magic2.cfg (1.1): Add multipipe config files to run MAGIC single-telescope simulations. 2022-06-22 13:12 bernlohr * common/: mc_aux.h (1.205), sim_signal.c (1.116, prod6beta1): Thre tailing zeroes part of the prompt single-p.e. response can be dropped from dropped before conversion to random number lookup table. 2022-06-21 18:00 bernlohr * util/rpolist.c (1.12, prod6beta1): Add an option to set limits for the printed interpolation results. 2022-06-21 17:59 bernlohr * hess/Makefile.hess (1.301): Also exporting the smoothed MAGIC single-p.e. response as an alternative. 2022-06-21 17:55 bernlohr * cfg/MAGIC/: prompt_ap-MAGIC1.dat (1.2), prompt_ap-MAGIC1_par.dat (1.1), prompt_ap-MAGIC2.dat (1.2), prompt_ap-MAGIC2_par.dat (1.1) (utags: prod6beta1): Updated MAGIC telescopes single-p.e. response files (by JS). As an alternative to the step-like distributions (for consistency with usual MAGIC simulation procedure), a smoothed version was added. 2022-06-21 17:51 bernlohr * cfg/MAGIC/: MAGIC1.cfg (1.6), MAGIC2.cfg (1.6): A few additional parameters set to zero. 2022-06-21 12:56 bernlohr * util/Makefile (1.16), LightEmission/Makefile (1.22), hess/Makefile.hess (1.300): In case NO_RPATH is set (non-empty), no rpath will be written into binaries, which means you really need the proper LD_LIBRARY_PATH at run time. 2022-06-15 20:34 bernlohr * cfg/CTA/CTA-PROD6-LaPalma-7tel.cfg (1.1), cfg/CTA/CTA-PROD6-Paranal-7tel.cfg (1.1), multi/multi_cta-prod6-lapalma-7tel.cfg (1.1), multi/multi_cta-prod6-paranal-7tel.cfg (1.1): Configuration files for a quick telescope model test with one of each kind. 2022-06-15 15:11 bernlohr * doc_src/sim_hessarray.tex (1.138): Clarification for nsb_offaxis parameter. 2022-06-15 15:05 bernlohr * cfg/CTA/: CTA-PROD6-SCT.cfg (1.25), CTA-PROD6-SST-CHEC-S-camera.cfg (1.10): Updating trigger threshold for SCT and SST. 2022-06-15 15:04 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.15): Updating PSF-related parameters. 2022-06-14 12:56 bernlohr * hess/Makefile.hess (1.299), util/Makefile (1.15): Fix RPATH problem in the pfp tool (do not use relative paths there). 2022-06-14 12:54 bernlohr * cfg/CTA/: CTA-PROD6-FlashCam-camera.cfg (1.7), CTA-PROD6-LST.cfg (1.14), CTA-PROD6-MST-NectarCam.cfg (1.12), CTA-PROD6-SCT.cfg (1.24), CTA-PROD6-SST-CHEC-S-camera.cfg (1.9): Update NSB rates (for SST the nsb_offaxis parameters) and a first iteration of thresholds for prod-6. 2022-06-10 17:06 bernlohr * cfg/CTA/CTA-PROD6-FlashCam-camera.cfg (1.6), cfg/CTA/CTA-PROD6-MST-FlashCam.cfg (1.8), cfg/CTA/CTA-PROD6-MST-NectarCam.cfg (1.11), cfg/CTA/CTA-PROD6-pmt.cfg (1.3, prod6beta1), cfg/CTA/qe_R12992-100-05b.dat (1.2, prod6beta1), cfg/CTA/qe_R12992-100-05c.dat (1.1, prod6beta1), hess/Makefile.hess (1.298): Update QE curve for MSTs, resulting in a small change to NSB p.e. rates. 2022-06-10 17:04 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.23): Updated fit for NSB falling off off-axis. 2022-06-10 17:03 bernlohr * p6eff_all.sh (1.3, prod6beta1): Report the testeff command line which actually produces the full table output. 2022-06-09 19:01 bernlohr * cfg/CTA/FBK_final_calibrated_Queff_2022.dat (1.1, prod6beta1): Adding updated SCT PDE. 2022-06-09 18:58 bernlohr * hess/Makefile.hess (1.297): Add updated SCT PDE to list of exported configuration data files. 2022-06-09 17:54 bernlohr * cfg/: CTA/CTA-PROD6-FlashCam-camera.cfg (1.5), CTA/CTA-PROD6-LST.cfg (1.13), CTA/CTA-PROD6-MST-NectarCam.cfg (1.10), CTA/CTA-PROD6-SCT.cfg (1.22), CTA/CTA-PROD6-SST-ASTRI-optics.cfg (1.6), CTA/CTA-PROD6-SST-CHEC-S-camera.cfg (1.8), CTA/CTA-PROD6-common.cfg (1.4), CTA/CTA-PROD6-metaparam.cfg (1.3), MAGIC/MAGIC1.cfg (1.5), MAGIC/MAGIC2.cfg (1.5): Updating most of the outstanding parameters. New NSB evaluations. 2022-06-09 16:56 bernlohr * p6eff.sh (1.2, prod6beta1), p6eff_all.sh (1.2), testeff.c (1.47, prod6beta1): Include MAGIC telescopes in efficiency evaluation (which needs the cfg/MAGIC include path also in testeff). 2022-06-08 11:46 bernlohr * cfg/CTA/: CTA-PROD6-FlashCam-camera.cfg (1.4), CTA-PROD6-LST.cfg (1.12), CTA-PROD6-MST-NectarCam.cfg (1.9), CTA-PROD6-SCT.cfg (1.21), CTA-PROD6-SST-CHEC-S-camera.cfg (1.7): First iteration of trigger thresholds for all telescope/camera types and all illumination levels to be used with prod-6. 2022-06-07 19:17 bernlohr * cfg/CTA/CTA-PROD6-FlashCam-camera.cfg (1.3): Drop fadc_amplitude line coming from prod-4 config. That value was just a little bit off (w.r.t. what is used with HESS CT5) but totally wrong for moonlight conditions. 2022-06-03 17:30 bernlohr * hess/Makefile.hess (1.296): Use the rules in the util directory only to make pre-processors. 2022-06-03 17:28 bernlohr * cfg/CTA/CTA-PROD6-Paranal.cfg (1.4): Harden config file against pre-processor not capable of math evaluation. 2022-06-03 17:27 bernlohr * util/: Makefile (1.14), pfp.c (1.27), tinyexpr.c (1.4, prod6beta1): The tinyexpr utility should now compile and work just fine with older compilers (at least gcc 4.8.5). Convince pfp to make use of it with these older compilers. 2022-06-03 14:56 bernlohr * cfg/CTA/CTA-PROD6-Paranal.cfg (1.3): Report actual number of telescopes per type even if non-standard numbers used. 2022-06-03 13:12 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.20): Re-calculated on-axis NSB after shadowing updates. 2022-06-02 15:40 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.19): And yet another little twist in that number. 2022-06-02 15:29 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.18): Fix swapped digits (284.8 versus 248.8). 2022-06-02 14:31 bernlohr * PSF/xpsf_z_loop_prod6.sh (1.7, prod6beta1), cfg/CTA/CTA-PROD6-SCT.cfg (1.17), cfg/CTA/sct_secondary_segments.dat (1.4, prod6beta1), cfg/CTA/sct_secondary_segments_poly.dat (1.2, prod6beta1), doc_src/sim_hessarray.tex (1.137): Updating SCT shadowing with baffle and removing S2.3r corner from secondary outer ring segments. 2022-06-01 12:53 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.16): Updating SCT shadowing correction. 2022-05-30 20:55 bernlohr * cfg/CTA/array_trigger_prod6_paranal.dat (1.2): Remove renamed file original name from CVS. 2022-05-30 20:26 bernlohr * cfg/CTA/array_trigger_prod6_paranal_4_25_50_0.dat (1.1): Renamed array trigger definition without SCTs. 2022-05-30 20:19 bernlohr * hess/Makefile.hess (1.295): Export array trigger definition files named after number of telescopes per type. 2022-05-30 20:16 bernlohr * cfg/CTA/array_trigger_prod6_paranal_4_25_50_25.dat (1.1): Array trigger definition when SCTs are included at same position as MSTs. 2022-05-30 20:14 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.15): Get rid of two stray characters that got into the file somehow. 2022-05-30 19:01 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.14), cfg/CTA/sct_primary_segments.dat (1.4, prod6beta1), cfg/CTA/sct_primary_segments_poly.dat (1.1, prod6beta1), cfg/CTA/sct_secondary_segments.dat (1.3), cfg/CTA/sct_secondary_segments_poly.dat (1.1), hess/Makefile.hess (1.294): Added accurate polygon segmentation files for SCT. Updated ring segment approximation. Run-time selectable which one to use. 2022-05-30 17:25 bernlohr * cfg/CTA/: sct_primary_segments.dat (1.3), sct_secondary_segments.dat (1.2): Updating SCT segmentation with ring segments matching actual segments as close as possible. 2022-05-28 01:50 bernlohr * p6eff.sh (1.1), p6eff_all.sh (1.1): Add optical efficiency evaluations scripts for prod-6 configuration to CVS. 2022-05-28 01:48 bernlohr * testeff.c (1.46): Add support for atmospheric density profile by name rather than number. 2022-05-27 23:25 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.13), cfg/CTA/waveform_1pe_SMART_12_04_2022s.dat (1.1, prod6beta1), hess/Makefile.hess (1.293): Pulse shape for SCT shifted to match peak position as used in earlier configurations. Export only the shifted pulse shape rather than the original contribution. 2022-05-27 21:00 bernlohr * common/: mc_aux.h (1.204), sim_config.c (1.221), sim_signal.c (1.115), sim_telarray.c (1.179): Add minimum separation option to array trigger definitions. Reset all effective focal length values between per-telescope set-ups. 2022-05-27 20:58 bernlohr * hess/hess_defaults.h (1.150): Set all effective focal length values explicitely to zero (which it was anyway). 2022-05-27 20:15 bernlohr * cfg/CTA/CTA-PROD6-Paranal.cfg (1.2): Allow for varying numbers of telescope per type, enforcing that array trigger definition file matches these numbers. 2022-05-27 20:12 bernlohr * cfg/CTA/CTA-PROD6-SST-ASTRI-optics.cfg (1.5): Updating shadowing correction (telescope_transmission). 2022-05-27 20:11 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.11): Fix broken pre-processor line. 2022-05-27 20:10 bernlohr * cfg/CTA/transmission_sstcam_weighted_220512.dat (1.2, prod6beta1): Extrapolate below 300 nm, based on Borofloat33 transmission curve. 2022-05-26 01:54 bernlohr * generic_run.sh (1.52), multi/multi_cta-prod6-lapalma.cfg (1.2), multi/multi_cta-prod6-lst.cfg (1.2), multi/multi_cta-prod6-mst-fc.cfg (1.2), multi/multi_cta-prod6-mst-nc.cfg (1.2), multi/multi_cta-prod6-paranal.cfg (1.2), multi/multi_cta-prod6-sct.cfg (1.2), multi/multi_cta-prod6-sst.cfg (1.2): Add a mechanism to determine at run-time up to which moonlight level the multipipe pipes should be processed through generic_run.sh. 2022-05-26 01:52 bernlohr * hess/Makefile.hess (1.292): Export prod-6 array trigger definitions. 2022-05-25 22:16 bernlohr * cfg/CTA/: array_trigger_prod6_lapalma.dat (1.1), array_trigger_prod6_paranal.dat (1.1): Get started with array trigger for actual prod-6 configuration. 2022-05-25 18:28 bernlohr * hess/Makefile.hess (1.291): Export updated single-p.e. response for LST. 2022-05-25 18:26 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.12): Updating NSB pixel rates, but telescope_transmission as assumed is likely outdated. 2022-05-25 18:24 bernlohr * cfg/CTA/CTA-PROD6-pmt.cfg (1.2): Use updated single-p.e. response as default and for LST. 2022-05-25 18:23 bernlohr * cfg/CTA/ref_astri-2d_2018-01-17_25-40deg.dat (1.2, prod6beta1): Missing comment character '#' on first line. 2022-05-25 18:14 bernlohr * cfg/CTA/spe_LST_2022-04-27_AP2.0e-4.dat (1.1, prod6beta1): Updated LST single-p.e. spectrum (original name: spe_with_prompt_from_Mitsunari.dat). 2022-05-24 21:55 bernlohr * cfg/CTA/CTA-PROD6-SCT.cfg (1.11): The configuration of mirror segmentation got lost between prod-4 and prod-6. 2022-05-24 21:24 bernlohr * PSF/xpsf_z_loop_prod6.sh (1.6): Remove some (previously commented-out) code. Report complete command line also in xpsf_loop.lis. 2022-05-24 21:22 bernlohr * cfg/CTA/: CTA-PROD6-LST.cfg (1.10), CTA-PROD6-MST-FlashCam.cfg (1.7), CTA-PROD6-MST-NectarCam.cfg (1.8), CTA-PROD6-SCT.cfg (1.10), CTA-PROD6-SST-CHEC-S-camera.cfg (1.6): Fix bad comments in NSB pre-processor defines. Remove extra focus_offset=0 (not matching new shape definitions) for SCT. 2022-05-24 19:53 bernlohr * cfg/CTA/sct_primary_segments.dat (1.2): Reduce gaps between segments on SCT primary mirror from 2.0 to 1.2 cm. 2022-05-23 18:59 bernlohr * cfg/CTA/: CTA-PROD6-LST.cfg (1.9), CTA-PROD6-MST-FlashCam.cfg (1.6), CTA-PROD6-MST-NectarCam.cfg (1.7), CTA-PROD6-SCT.cfg (1.9), CTA-PROD6-SST-CHEC-S-camera.cfg (1.5): Update re-calculated NSB levels. 2022-05-23 17:10 bernlohr * hess/Makefile.hess (1.290): Export new SST configuration data files. 2022-05-23 17:08 bernlohr * cfg/CTA/: PDE_lvr3_6mm_75um_uncoated_5.9V.dat (1.1, prod6beta1), SPE_Gentile_oct0d05_spe0d05_d2022-03-23.dat (1.1, prod6beta1), camera_CHEC-S_x9r_6mm.dat (1.1, prod6beta1), disc_shape_sstcam_04042022.dat (1.1, prod6beta1), pulse_sstcam_FADC_04042022.dat (1.1, prod6beta1), transmission_sstcam_weighted_220512.dat (1.1): Configuration files contributed by the SST team. 2022-05-23 17:06 bernlohr * cfg/CTA/LST_pulse_shape_7dynode_high_intensity_pix1s.dat (1.1, prod6beta1): Pulse shapes (HG+LG) for LST cameras with 7-dynode pixels. Shifted to the same peak position as the 8-dynode pulse shape. 2022-05-23 17:03 bernlohr * cfg/CTA/: CTA-PROD6-SST-ASTRI-optics.cfg (1.4), CTA-PROD6-SST-CHEC-S-camera.cfg (1.4), CTA-PROD6-SST.cfg (1.6, prod6beta1): Parameter updates for SST. 2022-05-23 17:01 bernlohr * cfg/CTA/spe_SCT_oxt0.3_s0.149_0.11.dat (1.1, prod6beta1): Simple extrapolation of cross-talk peaks for SCT to migher multiplicities. 2022-05-23 13:06 bernlohr * cfg/CTA/: CTA-PROD6-LST.cfg (1.8), LST_pulse_shape_7dynode_high_intensity_pix1t.dat (1.1, prod6beta1): The 8-dynode pulse shape is only used now with LSTN-01 (LST-1 prototype) while all other LSTs are using the 7-dynode pulse shape. 2022-05-18 20:09 bernlohr * hess/Makefile.hess (1.289): More files exported for configuration and for documentation (figures). 2022-05-18 20:07 bernlohr * doc_src/: sim_hessarray.tex (1.136), fig_src/dual_mirror_rays_conv.fig (1.1, prod6beta1), fig_src/parconvdiv.fig (1.1, prod6beta1), fig_src/parconvdiv2.fig (1.1, prod6beta1): Add a figure about divergent pointing to the manual. Update broken links. Add more fig sources for figures used in the manual to CVS. 2022-05-17 22:47 bernlohr * multi/: multi_cta-prod6-lapalma-test.cfg (1.3), multi_cta-prod6-lapalma.cfg (1.1), multi_cta-prod6-lst.cfg (1.1), multi_cta-prod6-mst-fc.cfg (1.1), multi_cta-prod6-mst-nc.cfg (1.1), multi_cta-prod6-paranal.cfg (1.1), multi_cta-prod6-sct.cfg (1.1), multi_cta-prod6-sst.cfg (1.1): In addition to multipipe configs for Paranal and La Palma arrays, also add configs for single telescope types (e.g. to be used with muon simulations). 2022-05-17 22:44 bernlohr * cfg/CTA/: CTA-PROD6-LaPalma.cfg (1.1), CTA-PROD6-Paranal.cfg (1.1): Towards final prod-6 array configurations. So far same as earlier test versions. 2022-05-17 13:58 bernlohr * doc_src/sim_hessarray.tex (1.135): Mention practical operation of a telescope array with convergent/divergent pointing. 2022-05-16 21:22 bernlohr * common/mc_aux.h (1.203), common/sim_config.c (1.220), doc_src/sim_hessarray.tex (1.134), hess/hess_defaults.h (1.149), hess/sim_conv2hess.c (1.135): Instead of forcing all telescope to look towards the same point for convergent pointing (and away for divergent), this can be made telescope-specific. Add sub-section in manual on it. 2022-05-16 16:17 bernlohr * sim_hessarray.dox (1.26), doc_src/sim_hessarray.tex (1.133): Update version dates for documentation. 2022-05-16 16:15 bernlohr * doc_src/sim_hessarray.tex (1.132): Add '-W' option to manual. 2022-05-16 15:32 bernlohr * common/sim_config.c (1.219): Adding 'weak' command-line configuration parameters. These get processed before the configuration file(s) rather than after the file(s). 2022-05-09 15:02 bernlohr * cfg/CTA/: CTA-PROD6-SCT.cfg (1.8), CTA-PROD6-SST-ASTRI-optics.cfg (1.3): More work-in-progress updates for SCT and SST configurations. 2022-05-09 14:50 bernlohr * common/sim_config.c (1.218): Conical baffle shape should actually work, no need to force conversion to cylinder. 2022-05-09 14:46 bernlohr * hess/Makefile.hess (1.288): Commit two variants of SCT single-p.e. response and updated SCT pulse shape. 2022-04-29 17:57 bernlohr * hess/Makefile.hess (1.287): Add updated SCT reflectivity curves to export. 2022-04-29 17:54 bernlohr * cfg/CTA/: CTA-PROD6-MST-FlashCam.cfg (1.5), CTA-PROD6-MST-NectarCam.cfg (1.6), CTA-PROD6-MST-optics.cfg (1.6), CTA-PROD6-SCT.cfg (1.7): Updating MST shadowing (telescope_transmission). Fixing a typo (extra '#'). 2022-04-28 17:48 bernlohr * cfg/CTA/: CTA-PROD6-MST-optics.cfg (1.5), CTA-PROD6-SCT.cfg (1.6): Update config_version strings where values got recently changed. 2022-04-28 17:25 bernlohr * cfg/CTA/: CTA-PROD6-LST.cfg (1.7), CTA-PROD6-MST-FlashCam.cfg (1.4), CTA-PROD6-MST-NectarCam.cfg (1.5), CTA-PROD6-MST-optics.cfg (1.4), CTA-PROD6-SST.cfg (1.5): Minor configuration updates. 2022-04-28 17:24 bernlohr * cfg/CTA/: CTA-PROD6-SCT.cfg (1.5), SCT_M1_reflectivity_with_filter_Prod6.dat (1.1, prod6beta1), SCT_mirror_reflectivity_Prod6_nofilter.dat (1.1, prod6beta1): Updating relectivity tables for SCT (M2 as measured, M1 with planned suppresion of long wavelength photons). 2022-04-16 21:58 bernlohr * Cameras/: Makefile (1.9), modular_camera.cc (1.16, prod6beta1): Allow to conveniently build all supported generator versions, actually adding a few one that were never used so far. 2022-04-06 22:39 bernlohr * common/sim_signal.c (1.114), hess/sim_conv2hess.c (1.134): Completing the optional pedestal compensation before recording. 2022-04-04 17:12 bernlohr * PSF/: xpsf_z_loop_prod6.sh (1.5), xpsf_z_prod6.sh (1.4, prod6beta1): Pass down a '-n' option to the rx tool (stick with spot around center of gravity). 2022-04-04 14:13 bernlohr * hess/Makefile.hess (1.286): Also export a configuration package with MAGIC-specific files. 2022-04-02 20:00 bernlohr * cfg/CTA/spe_afterpulse_pdf_NectarCam_18122019.dat (1.1, prod6beta1): Add a older configuration data file to CVS. 2022-04-02 19:56 bernlohr * cfg/CTA/: CTA-PROD6-SST-ASTRI-optics.cfg (1.2), CTA-PROD6-SST-CHEC-S-camera.cfg (1.3), CTA-PROD6-SST.cfg (1.4): Remove former (prod-4) backward-compatibility flags. When extracting parameters for the testeff tool, we have to make sure that we return angle-independent reflectivity and window transmission curves previously evaluated for the range of incidence angles to be expected. 2022-04-02 19:53 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.6): Add extra checks on being LST in northern or southern hemisphere. 2022-04-02 19:53 bernlohr * cfg/CTA/CTA-PROD6-LST-prototype.cfg (1.4): Fix type in pre-processor controls. 2022-04-02 19:22 bernlohr * hess/Makefile.hess (1.285): Export added reflectivity files. 2022-04-02 19:17 bernlohr * cfg/CTA/array_trigger_prod5_paranal_alpha.dat (1.1, prod6beta1): Add Paranal prod-5 Alpha-layout trigger definition (as already used) to CVS. 2022-04-02 19:15 bernlohr * cfg/CTA/: ref_astri-2d_2018-01-17_10deg.dat (1.1, prod6beta1), ref_astri-2d_2018-01-17_25-40deg.dat (1.1): For the testeff tool we need 1-D mirror reflectivity curves at the effective range of incidence angles. 2022-04-02 19:14 bernlohr * cfg/CTA/: ref_LST1_2022_04_01.dat (1.1), ref_LST2_2022_04_01.dat (1.1), ref_LST3_2022_04_01.dat (1.1), ref_LST4_2022_04_01.dat (1.1) (utags: prod6beta1): Individual reflector-averaged mirror reflectivity curves of LST mirrors installed or to be installed on LaPalma. 2022-04-01 01:40 bernlohr * cfg/CTA/: CTA-PROD6-LST-prototype.cfg (1.3), CTA-PROD6-LST.cfg (1.5), CTA-PROD6-LaPalma-test.cfg (1.2), CTA-PROD6-MST-FlashCam.cfg (1.3), CTA-PROD6-MST-NectarCam.cfg (1.4), CTA-PROD6-Paranal-test.cfg (1.2), CTA-PROD6-SCT.cfg (1.4), CTA-PROD6-SST.cfg (1.3), CTA-PROD6-common.cfg (1.3), CTA-PROD6-final.cfg (1.1, prod6beta1), CTA-PROD6-metaparam.cfg (1.2), CTA-PROD6-site.cfg (1.4): More flexible naming of files included. Add a config file to be included at array level after the telescope config files are all done, for any common overriding actions. 2022-04-01 01:38 bernlohr * cfg/MAGIC/: MAGIC1.cfg (1.4), MAGIC2.cfg (1.4): Sync with latest github versions. Allow for more flexible use, with or without common CTA-PROD6 configs. 2022-03-31 15:21 bernlohr * cfg/CTA/CTA-PROD6-site.cfg (1.3): Avoid possible warning about perhaps undefined SITE_ALTITUDE when processing individual telescopes - while it only matters at global scope. 2022-03-31 15:08 bernlohr * cfg/MAGIC/: pmt_MAGIC1_test.cfg (1.2), pmt_MAGIC2_test.cfg (1.2) (utags: prod6beta1): Make the pm_transit_time setting explicit rather than depend on CTA default settings. 2022-03-31 13:34 bernlohr * cfg/CTA/CTA-PROD6-LST.cfg (1.4): Increase qe_variation. 2022-03-30 22:16 bernlohr * common/absorb.h (1.17, prod6beta1), common/mc_aux.h (1.202), common/sim_absorb.c (1.34, prod6beta1), common/sim_config.c (1.217), common/sim_telarray.c (1.178), hess/cta_defaults.h (1.2), hess/hess_defaults.h (1.148): Fix the issue of telescope to observation level atmospheric transmission where the observation level is below the lower limit of the transmission table. Laser events get an additional wavelength parameter (also used for LED events). 2022-03-30 22:10 bernlohr * doc_src/sim_hessarray.tex (1.131): Documentation updates. 2022-03-30 10:05 bernlohr * hess/Makefile.hess (1.284): Keep -DHESS_DEFAULTS for now. 2022-03-30 09:41 bernlohr * generic_run.sh (1.51): Do not insert '_desert' into prod5/6 file names. 2022-03-30 09:34 bernlohr * common/sim_telarray.c (1.177): Delay debugging of recent change in atmospheric transmission between telescope and observation layer. 2022-03-29 18:31 bernlohr * PSF/xpsf_z_loop_prod6.sh (1.4): Include MAGIC telescopes with PSF evaluation script. 2022-03-29 18:30 bernlohr * param_comp/: mk_param_comp.sh (1.16), param_comp.sh (1.13) (utags: prod6beta1): Include MAGIC telescopes with parameter comparison for prod-6. 2022-03-29 18:29 bernlohr * doc_src/fig/pixpar4.png (1.1, prod6beta1): Adding plot in the right place. 2022-03-29 18:29 bernlohr * cfg/MAGIC/: MAGIC1.cfg (1.3), MAGIC2.cfg (1.3): Update focal lengths for MAGIC telescopes. 2022-03-29 18:27 bernlohr * hess/Makefile.hess (1.283): Export two more files for MAGIC configuration. 2022-03-29 18:22 bernlohr * cfg/CTA/: CTA-PROD6-FlashCam-camera.cfg (1.2), CTA-PROD6-LST.cfg (1.3), CTA-PROD6-SCT.cfg (1.3), CTA-PROD6-SST-CHEC-S-camera.cfg (1.2): Update of most (but not all) parameters with outstanding changes as agreed with telescope teams. 2022-03-29 18:19 bernlohr * cfg/CTA/: CTA-PROD6-LaPalma-test.cfg (1.1), CTA-PROD6-Paranal-test.cfg (1.1): Test versions of array-wide configurations towards prod-6 (not meant for production). 2022-03-29 01:36 bernlohr * util/pfp.c (1.26): Fix 'exit' with no effect. 2022-03-29 01:30 bernlohr * util/: Makefile (1.13), pfp.c (1.25): Improve preprocessor robustness. 2022-03-28 18:44 bernlohr * cfg/MAGIC/: MAGIC1.cfg (1.2), MAGIC2.cfg (1.2), pmt_MAGIC1_test.cfg (1.1), pmt_MAGIC2_test.cfg (1.1): Adapt MAGIC configurations for Prod-6. 2022-03-27 11:18 bernlohr * common/mc_aux.h (1.201), hess/Makefile.hess (1.282), hess/hess_defaults.h (1.147): Make building all CTA-specific versions with -DCTA_DEFAULTS but otherwise keep -DHESS_DEFAULTS. Should not make any difference anyway with configurations setting all relevant parameters. 2022-03-27 11:15 bernlohr * common/sim_histograms.c (1.29): Some histograms which were HEGRA-specific (probably not working any more anyway) now only for HEGRA_DEFAULTS, rather than not HESS_DEFAULTS. 2022-03-27 11:11 bernlohr * param_comp/mk_param_evo.sh (1.31, prod6beta1): Include release date with 'changed since prod-xx' strings. 2022-03-26 13:48 bernlohr * hess/cta_defaults.h (1.1): A derivative of hess_defaults.h but gradually getting rid of default values applying only to HESS telescopes. 2022-03-25 20:37 bernlohr * cfg/CTA/: CTA-PROD4-MST-optics.cfg (1.16, prod6beta1), CTA-PROD6-MST-optics.cfg (1.3): The telescope_transmission parameter was missing the function code. 2022-03-25 18:05 bernlohr * sim_hessarray.dox (1.25): Date of last changes. 2022-03-25 17:58 bernlohr * hess/sim_conv2hess.c (1.133): Comments only. 2022-03-25 16:45 bernlohr * rx.cc (1.9, prod6beta1), PSF/xpsf_z_loop_prod6.sh (1.3), PSF/xpsf_z_prod6.sh (1.3): Handling efficiencies with actual camera configurations as a command-line option; make sure that the dummy 1-pixel camera is not used together with the all-efficiencies-applied option. 2022-03-23 19:16 bernlohr * common/mc_aux.h (1.200), common/sim_config.c (1.216), hess/sim_conv2hess.c (1.132): We may want to report more than a single effective focal length value in case of asymmetric mirrors. 2022-03-23 19:14 bernlohr * common/sim_telarray.c (1.176): Single-letter typo fix in debugging code. 2022-03-23 19:12 bernlohr * common/sim_imaging.c (1.106, prod6beta1): Move all getenv calls out of the loop in shadowing debugging code. 2022-03-23 19:07 bernlohr * hess/Makefile.hess (1.281): Also export PSF evaluation shell scripts. 2022-03-23 19:00 bernlohr * PSF/: xpsf_z_loop_prod6.sh (1.2), xpsf_z_prod6.sh (1.2): Change options processing. Replace last use of 'selop' tool by 'bc'. 2022-03-23 15:59 bernlohr * rx.cc (1.8): Featuring correction of pixel/camera rotation, either automatically from the input file (up-to-date sim_telarray) or by manual setting. 2022-03-22 19:39 bernlohr * hess/Makefile.hess (1.280): Export also new files for prod-6 test production pipeline. 2022-03-22 19:38 bernlohr * doc_src/sim_hessarray.tex (1.130): Clarification on MIRRORS parameter. 2022-03-22 19:36 bernlohr * hess/hess_defaults.h (1.146): Add site configuration (meta) parameters, expand effective focal length from a single value to up to five values, in case of asymmetric PSF. 2022-03-22 19:34 bernlohr * param_comp/: mk_param_comp.sh (1.15), mk_param_evo.sh (1.30), param_comp.sh (1.12), param_comp_hess.sh (1.6, prod6beta1): Updating parameter comparison/evolution scripts to work better with prod-6 configuration. 2022-03-22 19:33 bernlohr * multi/: multi_cta-prod6-lapalma-test.cfg (1.2), multi_cta-prod6-paranal-test.cfg (1.2): Fixing generated filename suffixes. 2022-03-22 19:31 bernlohr * generic_run.sh (1.50): Atmospheric transmission filename no longer a mandatory command-line parameter, in order to give configuration files some flexibility. 2022-03-22 19:28 bernlohr * cfg/CTA/: CTA-PROD6-FlashCam-camera.cfg (1.1), CTA-PROD6-LST-prototype.cfg (1.2), CTA-PROD6-LST.cfg (1.2), CTA-PROD6-MST-FlashCam.cfg (1.2), CTA-PROD6-MST-NectarCam.cfg (1.3), CTA-PROD6-MST-optics.cfg (1.2), CTA-PROD6-SCT.cfg (1.2), CTA-PROD6-SST-ASTRI-optics.cfg (1.1), CTA-PROD6-SST-CHEC-S-camera.cfg (1.1), CTA-PROD6-SST.cfg (1.2), CTA-PROD6-common.cfg (1.2), CTA-PROD6-metaparam.cfg (1.1), CTA-PROD6-pmt.cfg (1.1), CTA-PROD6-sipm.cfg (1.1, prod6beta1), CTA-PROD6-site.cfg (1.2): Updating preliminary Prod-6 configuration files and more of them. Not finished yet. 2022-03-22 12:50 bernlohr * cfg/CTA/: array_trigger_prod6_lapalma_test.dat (1.1), array_trigger_prod6_paranal_test.dat (1.1): First test versions for array triggers with prod-6. 2022-03-22 12:24 bernlohr * cfg/CTA/: CTA-PROD5-Paranal-Alpha.cfg (1.1), CTA-PROD5-Paranal-SCT-test.cfg (1.1) (utags: prod6beta1): Commit existing Prod-5-based configuration files to CVS. 2022-03-22 12:18 bernlohr * generic_run.sh (1.49), multi/multi_cta-prod6-lapalma-test.cfg (1.1), multi/multi_cta-prod6-paranal-test.cfg (1.1): Get some tests for prod-6 pipelines started. 2022-03-17 18:52 bernlohr * PSF/: psf_int.sh (1.1, prod6beta1), xpsf_z.sh (1.1, prod6beta1), xpsf_z_loop_hess2.sh (1.1, prod6beta1), xpsf_z_loop_prod3.sh (1.1, prod6beta1), xpsf_z_loop_prod3a.sh (1.1, prod6beta1), xpsf_z_loop_prod4.sh (1.1, prod6beta1), xpsf_z_loop_prod4a.sh (1.1, prod6beta1), xpsf_z_loop_prod6.sh (1.1), xpsf_z_prod3.sh (1.1, prod6beta1), xpsf_z_prod4.sh (1.1, prod6beta1), xpsf_z_prod6.sh (1.1), xpsf_z_single.sh (1.1, prod6beta1): Committing various script for PSF evaluation to CVS. Not all of these scripts are still in use. 2022-03-10 19:28 bernlohr * hess/Makefile.hess (1.279): Also export prod-6 config files. 2022-03-10 19:27 bernlohr * hess/hess_defaults.h (1.145): Lower limit on focus_offset no longer useful (optional terms are including zenith angle dependence). 2022-03-04 01:30 bernlohr * common/mc_aux.h (1.199), common/sim_config.c (1.215), common/sim_signal.c (1.113), common/sim_telarray.c (1.175), hess/sim_conv2hess.c (1.131): Report various pixel properties as used internally into the output file at the start of the run. 2022-03-04 01:27 bernlohr * util/: pfp.c (1.24), tinyexpr.c (1.3): Get pfp.c in shape to be compiled by a C++ compiler, but tinyexpr.c is futile. 2022-03-04 01:23 bernlohr * hess/Makefile.hess (1.278), util/Makefile (1.12): We can compile the rest of the C files with a C++ compiler but tinyexpr.c is resistent. Make sure that gets compiled as real C. 2022-03-01 13:31 bernlohr * Cameras/: dsum_patchify.cc (1.4, prod6beta1), fov.cc (1.13, prod6beta1), mapmtpix.cc (1.7, prod6beta1), modular_camera.cc (1.15), pixel_remap_trg.cc (1.9, prod6beta1), scale_pix.c (1.3, prod6beta1): Make the '--help' option also tell what the program is about. 2022-03-01 13:01 bernlohr * common/mc_aux.h (1.198), common/sim_config.c (1.214), common/sim_signal.c (1.112), common/sim_telarray.c (1.174), hess/Makefile.hess (1.277), hess/hess_defaults.h (1.144), hess/sim_conv2hess.c (1.130): Pedestal compensation, part 1. Prepare for prod-6-specific builds, preliminary (same as prod-5). Revise disabling pixels. 2022-03-01 12:51 bernlohr * common/: absorb.h (1.16), sim_absorb.c (1.33): Calculate transmission from emission point to telescope sphere rather than observation level. 2022-03-01 12:42 bernlohr * param_comp/: mk_param_comp.sh (1.14), mk_param_evo.sh (1.29), param_comp.sh (1.11): Adapt for upcoming prod-6 configuration. 2022-03-01 12:41 bernlohr * doc_src/: sim_hessarray.tex (1.129), fig/CTA-20180920-ParametersOpticsSCT-v-1-2-eps-converted-to.pdf (1.1, prod6beta1), fig/Sampling.eps (1.1, prod6beta1), fig/Sampling.pdf (1.1, prod6beta1), fig/UTM.eps (1.1, prod6beta1), fig/UTM.pdf (1.1, prod6beta1), fig/UTM.png (1.1, prod6beta1), fig/pixpar4.eps (1.1, prod6beta1), fig/pixpar4.pdf (1.1, prod6beta1): Update documentation. Add more figures to CVS. 2022-03-01 12:10 bernlohr * cfg/MAGIC/README.md (1.1, prod6beta1): Add info on source of the contributed files. 2022-03-01 12:07 bernlohr * cfg/MAGIC/: CTA-PROD5-LaPalma-baseline_4LSTs_MAGIC.cfg (1.1, prod6beta1), LightCollection-MAGIC2-smooth_simtel.dat (1.1, prod6beta1), MAGIC1.cfg (1.1), MAGIC2.cfg (1.1), camera_CTA-MAGIC_MajorityTrigger-3NN.dat (1.1, prod6beta1), mirror_CTA-MAGIC1_new_corrected-mirror-positions.dat (1.1, prod6beta1), mirror_CTA-MAGIC2_new_corrected-mirror-positions.dat (1.1, prod6beta1), prompt_ap-MAGIC1.dat (1.1), prompt_ap-MAGIC2.dat (1.1), pulse_MAGIC_FWHM1.75ns.dat (1.1, prod6beta1), pulse_MAGIC_FWHM2.00ns.dat (1.1, prod6beta1), qe-hamamatsu_MAGIC1_koji.dat (1.1, prod6beta1), qe-hamamatsu_MAGIC2_koji.dat (1.1, prod6beta1), qe_lst1_20200318_highandlow.dat (1.1, prod6beta1), qe_lst2-4_20200318_highandlow.dat (1.1, prod6beta1), ref_MAGIC1_average_20220201.dat (1.1, prod6beta1), ref_MAGIC2_average.dat (1.1, prod6beta1): Configuration files contributed for simulation of LSTs plus MAGIC telescopes. 2022-03-01 12:04 bernlohr * cfg/CTA/: CTA-PROD6-LST-prototype.cfg (1.1), CTA-PROD6-MST-NectarCam.cfg (1.2), CTA-PROD6-MST-optics.cfg (1.1), CTA-PROD6-common.cfg (1.1), CTA-PROD6-site.cfg (1.1): More configuration files for updating from Prod-4/5 to Prod-6. 2022-03-01 12:03 bernlohr * cfg/CTA/CTA-PROD4-site.cfg (1.7, prod6beta1): Even when falling back to desert atmosphere as a last resort for La Palma, the base of the boundary layer would still be at sea level (was never used). 2022-03-01 12:01 bernlohr * cfg/CTA/CTA-PROD4-common.cfg (1.6, prod6beta1): Load configuration version, if we have any. 2022-02-28 20:04 bernlohr * util/: pfp.c (1.23), tree.c (1.7, prod6beta1): Restore case-insensitivity for defined symbols also when WITH_EXISTS is defined (which is now the case by default). Also drop some remaining lines for pre-ANSI-C compilers. 2022-02-25 15:24 bernlohr * cfg/hess2/hess-phase2d.cfg (1.30): The DSUM_PRESCALE for moonlight did not correspond to a shift by 8 bits (division by 255 instead of 256). 2022-02-23 10:49 bernlohr * cfg/CTA/: CTA-PROD6-LST.cfg (1.1), CTA-PROD6-MST-FlashCam.cfg (1.1), CTA-PROD6-MST-NectarCam.cfg (1.1), CTA-PROD6-SCT.cfg (1.1), CTA-PROD6-SST.cfg (1.1): Start Prod-6 configuration files although they all fall-back for the bulk of configuration parameters. 2022-02-03 20:08 bernlohr * cfg/hess2/hess-phase2d.cfg (1.29): More complete config version/variant metaparameters. 2022-02-03 19:28 bernlohr * cfg/hess2/hess-phase2d.cfg (1.28): Update parameters to match, in effect, the current working version of the HAP simulation group, after fixing a few conditional parameters. 2022-02-02 16:08 bernlohr * doc_src/sim_hessarray.tex (1.128): Better formatting of \parref names plus working hyperlinks for them. 2022-01-18 11:46 bernlohr * common/sim_signal.c (1.111), doc_src/sim_hessarray.tex (1.127): Clarify in documentation why the digital sum trigger threshold assigned in sim_telarray (DSUM_THRESHOLD) has to be one count lower than in the FlashCam FPGA-based trigger implementation. 2022-01-18 10:02 bernlohr * common/mc_aux.h (1.197), common/sim_telarray.c (1.173), doc_src/sim_hessarray.tex (1.126), hess/sim_conv2hess.c (1.129): Initial implementation of processing 3D photon bunches as alternatives to 2D (full-format and compact) bunches - but beware that the time information needs fixing. 2021-12-28 20:05 bernlohr * common/sim_signal.c (1.110), hess/sim_conv2hess.c (1.128): Fix recording of auxilliary traces. 2021-12-28 20:05 bernlohr * cfg/hess2/hess-phase2d.cfg (1.27): Make sure sample mode data gets recorded also for CT5_MONO operation. 2021-12-28 17:31 bernlohr * common/sim_signal.c (1.109): Update printf formatting in debugging code note used in a while. 2021-12-16 18:30 bernlohr * Copyright (1.9, prod6beta1), common/sim_config.c (1.213): Avoid yet another C99 snippet - but getting tired of sticking to C90. 2021-12-16 15:59 bernlohr * util/pfp.c (1.22): Fix first trial to include from '.' always failing (which anyway gets satisfied when going through include paths, so no files lost). 2021-12-14 00:31 bernlohr * util/pfp.c (1.21): Switch to fileopen, so that we can use the FILEOPEN_REPORT feature to get complete lists of files used in the preprocessing. 2021-11-12 15:11 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.15, prod6beta1): Document prior change also in the file itself. 2021-11-12 13:35 bernlohr * common/mc_aux.h (1.196): Complete the set of CTA_PROD5* definitions being basically just an equivalent to the corresponding CTA_PROD4*. 2021-11-11 16:10 bernlohr * doc_src/sim_hessarray.tex (1.125): Add an illustration for the different pixels_parallel modes. 2021-11-11 16:08 bernlohr * doc_src/fig/: cta-cameras.png (1.1), cta-cameras_small.png (1.1), dual_mirror_rays.eps (1.1), dual_mirror_rays.pdf (1.1), dual_mirror_rays.png (1.1), rpol_schemes.eps (1.1), segmented.eps (1.1), segmented.pdf (1.1), segmented.png (1.1), shadow_hess2.eps (1.1), shadow_hess2.pdf (1.1), shadow_hess2.png (1.1) (utags: prod6beta1): Add various prepared illustrations, as used in the documentation, to CVS. 2021-11-11 15:59 bernlohr * doc_src/fig_src/: pixpar4.fig (1.1), raybnd.fig (1.1) (utags: prod6beta1): Add source fig files to CVS. 2021-11-11 15:57 bernlohr * doc_src/mcmeas.tex (1.1, prod6beta1): Add an older document to CVS. 2021-11-11 12:46 bernlohr * cfg/CTA/Pulse_template_nectarCam_17042020.dat (1.1, prod6beta1): NectarCam pulse template was not in CVS. 2021-11-11 12:31 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.14): Use camera configuration with axis-parallel pixels shifted as modules. 2021-11-11 12:23 bernlohr * common/sim_config.c (1.212), common/sim_imaging.c (1.105), doc_src/sim_hessarray.tex (1.124), hess/hess_defaults.h (1.143): PIXELS_PARALLEL=3 stands for complete modules of pixels following the focal surface but keeping an alignment parallel to the optical axis (that requires a camera configuration file with proper module identification). 2021-11-11 12:19 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.13), cfg/CTA/transmission_sct_window_2020-01_30deg.dat (1.2, prod6beta1), cfg/CTA/transmission_sct_window_2020-01_50deg.dat (1.1, prod6beta1), hess/Makefile.hess (1.276): The camera window transmission at 50 deg incidence angle would be a more typical case to be used with testeff. 2021-11-09 20:47 bernlohr * cfg/CTA/: camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_Prod3.dat (1.3), camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_r1.dat (1.1), camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_r1mod.dat (1.1) (utags: prod6beta1): Original SCT camera configuration (fixing format comments) plus two derived versions. 2021-11-07 19:53 bernlohr * hess/Makefile.hess (1.275): Export SCT window transmission for 30 deg incidence angle (1-D). 2021-11-07 19:52 bernlohr * corsika/iact.c (1.139, prod6beta1): Re-generated after warning fix to iact_full5.c 2021-11-04 20:03 bernlohr * cfg/CTA/transmission_sct_window_2020-01.dat (1.2, prod6beta1): Cleaned up artefact at 290 nm / 70 deg incidence angle. 2021-11-03 18:46 bernlohr * corsika/iact_full5.c (1.142, prod6beta1): Fix compiler warning (long int / size_t comparison). 2021-11-03 18:45 bernlohr * common/sim_config.c (1.211): Fix compilation (use MAX_TEL rather than MAXIMUM_TELESCOPES in code). 2021-11-03 18:44 bernlohr * p4eff.sh (1.12, prod6beta1): Pass a '-DTESTEFF' for extracting configuration parameter, if there is something that testeff cannot handle, like a 2D camera filter table. 2021-11-03 18:42 bernlohr * cfg/CTA/transmission_sct_window_2020-01_30deg.dat (1.1): Add some effective (even though probably not too accurate) replacement of the 2D filter table just for use with 'testeff'. 2021-11-03 18:39 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.12): Camera filter efficiency added (which is a 2D table, emulated with a 1D replacement for the testeff tool). 2021-10-27 18:03 bernlohr * sim_hessarray.dox (1.24), doc_src/sim_hessarray.tex (1.123): Dates of documentation files. 2021-10-27 13:40 bernlohr * sim_hessarray.dox (1.23), common/mc_aux.h (1.195), common/sim_config.c (1.210), common/sim_telarray.c (1.172), doc_src/sim_hessarray.tex (1.122), hess/Makefile.hess (1.274), hess/hess_defaults.h (1.142), hess/sim_conv2hess.c (1.127), util/Makefile (1.11): Add support for meta-parameters. 2021-10-27 13:39 bernlohr * corsika/: Makefile.dist (1.87, prod6beta1), README (1.106), README.tex (1.95), corsika.dox (1.42, prod6beta1), iact.c (1.138), iact_full5.c (1.141): First round of (minor) changes for IACT/ATMO package version 1.64. 2021-10-27 13:37 bernlohr * cfg/hess2/hess-phase2d.cfg (1.26): Set config parameters that would be automatically used as metaparameters with a sim_telarray version supporting it. 2021-10-23 13:44 bernlohr * corsika/atmo.h (1.14, prod6beta1): Clang 13 complained about typedef redefinition being a C11 feature although gcc is happy with it for any language standard. 2021-09-29 16:46 bernlohr * cfg/hess/atm_trans_1835_1_10_0_0_1835_x0.5.dat (1.1, prod6beta1), cfg/hess2/hess-phase2d.cfg (1.25), hess/Makefile.hess (1.273): Add a clearer transmission table for the HESS site. 2021-09-29 16:41 bernlohr * hess/Makefile.hess (1.272), util/Makefile (1.10), util/atmtrans_interpol.cc (1.1, prod6beta1): Add tool for interpolating between atmospheric transmission tables. 2021-09-29 16:39 bernlohr * LightEmission/xyzls.cc (1.5, prod6beta1): Allow for multiple telescopes in the setup. 2021-09-01 14:59 bernlohr * hess/Makefile.hess (1.271): On exporting also generate a cfg/config_version.cfg file with the latest modification time of any config file. 2021-09-01 14:51 bernlohr * hess/hess_defaults.h (1.141), common/sim_config.c (1.209): Add a 'CONFIG_VERSION' dummy configuration keyword. 2021-09-01 14:48 bernlohr * cfg/hess2/hess-phase2d.cfg (1.24): Update zenith-angle dependence of PSF with preliminary parameters by J. Schaefer 2021-09-01 14:35 bernlohr * cfg/hess2/hess-phase2d.cfg (1.23): Update zenith-angle dependence of PSF with preliminary parameters by J. Schaefer 2021-08-30 18:06 bernlohr * corsika/Makefile.dist (1.86): With newer compiler versions we can also check compilation for newer language standards. 2021-08-30 18:05 bernlohr * corsika/iact.c (1.137): Get rid of compiler warning about long/size_t comparison. 2021-08-30 18:04 bernlohr * corsika/atmo.c (1.52, prod6beta1): Evaluate relevant starting point also for other fractions of full Cherenkov opening angle than half. 2021-08-30 17:14 bernlohr * util/tinyexpr.c (1.2): Increase allocation after g++ 11.2 complained about outside array bounds. 2021-05-15 16:57 bernlohr * util/pfp.c (1.20): Don't need to complain about undefined variables in if-deselected control lines. 2021-05-05 11:07 bernlohr * cfg/hess2/hess-phase2d.cfg (1.22): Once more updating optical efficiencies, mainly for CT1-4. 2021-04-26 22:57 bernlohr * cfg/hess2/hess-phase2d.cfg (1.21): Adapt HESS optical PSF to deterioration over time without any mirror re-alignment. 2021-04-23 19:22 bernlohr * cfg/hess2/hess-phase2d.cfg (1.20): Partial update of optical efficiencies towards phase2d3. 2021-03-13 13:01 bernlohr * common/str_xtra.c (1.1, prod6beta1): Own implementations of some string functions (strdup, strcasecmp, strncasecmp) which may not be available on older systems. 2021-03-13 12:51 bernlohr * common/testio.c (1.4): That was an old version of a program in the hessio package. 2021-03-11 18:26 bernlohr * sim_hessarray.dox (1.22), common/sim_config.c (1.208), doc_src/sim_hessarray.tex (1.121): Allow for a second random seed (to be applied after config stage). 2021-03-11 18:25 bernlohr * generic_run.sh (1.48), run_sim_hessarray_generic (1.5, prod6beta1), util/phase1_run.sh (1.2, prod6beta1): Ask for bash shell if we cannot guarantee that the script is free of 'bashisms'. 2021-03-11 12:02 bernlohr * LightEmission/Makefile (1.21): Linking with libraries specified after the sources, for improved compatibility with Ubuntu (which apparentyl adds some '--as-needed' to the boilerplate options for 'ld', in contrast to other Linux distributions). 2021-03-10 14:59 bernlohr * common/sim_histograms.c (1.28), common/sim_telarray.c (1.171), corsika/iact_full5.c (1.140), corsika/sim_skeleton.c (1.12, prod6beta1), util/extract_corsika_multi.c (1.6, prod6beta1), util/extract_corsika_tel.c (1.8, prod6beta1), util/multipipe_corsika.c (1.23): Adapt to the latest eventio version which may pre-set the maximum buffer size according to the MAX_IO_BUFFer environment variable and override on that only if we need something even larger. 2021-03-03 18:26 bernlohr * hess/Makefile.hess (1.270): Also export special HESS multipipe configuration files. 2021-03-03 18:25 bernlohr * multi/multi_phase2d.cfg (1.3, prod6beta1): Reminder added how to write zstd-compressed CORSIKA files. 2021-03-03 18:11 bernlohr * multi/: multi_phase2d.cfg (1.2), multi_phase2d2-Crab-Alt35.cfg (1.1, prod6beta1), multi_phase2d2-Crab-Alt40.cfg (1.1, prod6beta1), multi_phase2d2-Crab-Alt44.5.cfg (1.1, prod6beta1), multi_phase2d2-PKS2155-Alt60.cfg (1.1, prod6beta1), multi_phase2d2-PKS2155-Alt70.cfg (1.1, prod6beta1), multi_phase2d2-PKS2155-Alt80.cfg (1.1, prod6beta1), multi_phase2d_muontest.cfg (1.1, prod6beta1), multi_phase2d_muontest_selmuon.cfg (1.1, prod6beta1): Multipipe config files as used for various HESS 'phase2d2' productions. 2021-03-03 17:48 bernlohr * cfg/hess2/hess-phase2d.cfg (1.19): Take over a few experimental CT5 parameter overrides from the MPIK cluster. 2021-02-07 15:18 bernlohr * hess/Makefile.hess (1.269): Export ile_version.hh also with integrated LightEmission like with stand-alone package. 2021-02-04 16:48 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.26, prod6beta1): Version string updated to actual version. 2021-02-04 16:47 bernlohr * multi/: multi_cta-prod5-lapalma-baseline.cfg (1.5), multi_cta-prod5-paranal-baseline.cfg (1.4) (utags: prod6beta1): Activate NSB_AUTOSCALE. 2021-02-04 16:45 bernlohr * generic_run.sh (1.47): We can afford a large I/O buffer maximum size these days ... 2021-02-04 16:38 bernlohr * sim_hessarray.dox (1.21): Just the date shown. 2021-02-04 16:37 bernlohr * doc_src/sim_hessarray.tex (1.120): Documentation updates on splitting of optical efficiency degradation. 2021-02-04 16:33 bernlohr * testeff.c (1.45), hess/hess_defaults.h (1.140): Also from the splitting of optical efficiency degradation into mirror(s) and camera. 2021-02-04 16:31 bernlohr * LightEmission/: Doxyfile (1.7, prod6beta1), IactLightEmission.cc (1.15, prod6beta1), IactLightEmission.hh (1.18, prod6beta1), Makefile (1.20), ile_version.hh (1.4, prod6beta1): Source code documentation improved and clean-up of commented-out lines. 2021-02-04 16:26 bernlohr * common/: absorb.h (1.15), mc_aux.h (1.194), sim_absorb.c (1.32), sim_config.c (1.207), sim_imaging.c (1.104), sim_signal.c (1.108), sim_telarray.c (1.170): Splitting up degraded optical efficiency into primary mirror, optional secondary mirror, and camera, each with its own coefficient and map. File name maximum length enlarged. 2021-01-04 20:44 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.47, prod6beta1), CTA-PROD4-MST-FlashCam.cfg (1.18, prod6beta1), CTA-PROD4-MST-NectarCam.cfg (1.25), CTA-PROD4-SST-CHEC-S-camera.cfg (1.20, prod6beta1): NSB pixel rates for automatic zenith angle scaling also without math expression evaluation (HAVE_MATHEVAL). 2020-12-10 10:44 bernlohr * Copyright (1.8): Add another year to the list before it is over. 2020-12-07 19:36 bernlohr * corsika/: README (1.105), README.tex (1.94): Update file sizes. 2020-12-07 19:35 bernlohr * corsika/corsika_build_script (1.13): Building with EHISTORY and/or MUPROD options needs more work. 2020-12-07 19:34 bernlohr * corsika/: iact.c (1.136), iact_full5.c (1.139): Systematically flush stdout before printing to stderr. 2020-12-07 14:36 bernlohr * corsika/: iact.c (1.135), iact_full5.c (1.138): Fix another compile test failure for particle output. 2020-12-04 18:31 bernlohr * corsika/: iact.c (1.134), iact_full5.c (1.137): Fix possible memory re-allocation problem with TELPRT. 2020-12-04 14:16 bernlohr * corsika/: corsika_build_script (1.12), gen_config (1.21, prod6beta1): Support a few more CORSIKA compilation options. 2020-12-04 14:12 bernlohr * LightEmission/: IactLightEmission.cc (1.14), ile_version.hh (1.3): Convert a few more lines of diagnostic output from compile-time to run-time activated. 2020-12-03 21:58 bernlohr * LightEmission/: Doxyfile (1.6), IactLightEmission.cc (1.13), IactLightEmission.hh (1.17), fake-muon.cc (1.6, prod6beta1), ff-1m.cc (1.9, prod6beta1), ff-gct.cc (1.8, prod6beta1), fpls.cc (1.4, prod6beta1), ile_version.hh (1.2), ls-beam.cc (1.6, prod6beta1), ls-geo-test.cc (1.6, prod6beta1), ls-test.cc (1.2, prod6beta1), nsbls.cc (1.4, prod6beta1), octo.cc (1.4, prod6beta1), pixled.cc (1.8, prod6beta1), xyls.cc (1.4, prod6beta1), xyzls.cc (1.4): The pulse width of the LightSource class with "Gauss:..." pulse profile is now really interpreted as a sigma (r.m.s.) value, as documented before. Updated reference documentation. 2020-12-03 18:13 bernlohr * generic_run.sh (1.46): Also generate output directories if partially existing. 2020-11-30 20:52 bernlohr * LightEmission/: ff-1m.cc (1.8), ff-gct.cc (1.7): Use the same multi-intensity scheme with ff-1m and ff-gct as with xyzls. 2020-11-30 15:04 bernlohr * cfg/CTA/: CTA-PROD4-FlashCam-camera.cfg (1.9, prod6beta1), CTA-PROD4-LST-prototype.cfg (1.14, prod6beta1), CTA-PROD4-LST.cfg (1.46), CTA-PROD4-MST-FlashCam.cfg (1.17), CTA-PROD4-MST-NectarCam.cfg (1.24), CTA-PROD4-SST-CHEC-S-camera.cfg (1.19): Autoscaling NSB pixel rates as a function of zenith angle (needs to be activated explicitely). 2020-11-24 12:27 bernlohr * corsika/: iact.c (1.133), iact_full5.c (1.136): Fix compilation failure introduced by last-minute change. 2020-11-24 12:18 bernlohr * cfg/CTA/: CTA-PROD5-LaPalma-baseline.cfg (1.9), CTA-PROD5-Paranal-baseline.cfg (1.6) (utags: prod6beta1): Add optionally (experimentally) enabled non-uniform sampling and/or externally defined primary particles. 2020-11-24 11:29 bernlohr * corsika/: README (1.104), README.tex (1.93): Once more adjusting reported file sizes. 2020-11-24 11:23 bernlohr * corsika/: README (1.103), README.tex (1.92), corsika.dox (1.41), iact.c (1.132), iact.h (1.13, prod6beta1), iact_full5.c (1.135), sampling.c (1.9, prod6beta1): With working EXTPRM implementation. 2020-11-24 10:51 bernlohr * cfg/hess2/hess-phase2d.cfg (1.18): Extra comment line. 2020-11-24 10:50 bernlohr * cfg/hess2/hess-phase2d.cfg (1.17): Prepare for lower gain in CT1-4 although trigger threshold might change a bit, even in p.e. units. 2020-11-22 18:56 bernlohr * common/sim_config.c (1.206): Also remind of not using a NSB sky map with verbose mode. 2020-11-20 16:52 bernlohr * cfg/CTA/: CTA-PROD5-LaPalma-baseline.cfg (1.8), array_trigger_prod5_lapalma_extended.dat (1.2, prod6beta1): More extra telescope positions in prod-5b covered in telescope configuration and also in the array trigger configuration. 2020-11-12 19:51 bernlohr * corsika/: iact.c (1.131), iact_full5.c (1.134): Implementing EXTPRM. 2020-11-12 19:50 bernlohr * corsika/sampling.c (1.8): Get rid of warnings by some compilers. 2020-11-12 19:48 bernlohr * corsika/Makefile.dist (1.85): Bump exported version number. Report compiler versions in compilation tests. 2020-11-12 19:47 bernlohr * corsika/Copyright (1.14, prod6beta1): Minor refresh of global copyright notice. 2020-11-12 19:46 bernlohr * corsika/sim_skeleton.c (1.11): Keep gcc from complaining about variables set but not used. That is all as intended for a skeleton program. 2020-11-11 13:30 bernlohr * hess/sim_conv2hess.c (1.126): Little addition to explanations written to log output. 2020-11-11 13:29 bernlohr * corsika/: iact_full5.c (1.133), sampling.c (1.7): Implementing 3-zone importance sampling. 2020-11-04 18:45 bernlohr * cfg/CTA/CTA-PROD5-LaPalma-baseline.cfg (1.7): Prepare for three more alternate MST telescope position with either camera type. 2020-11-04 00:29 bernlohr * sim_hessarray.dox (1.20), Cameras/drawdrawers.cc (1.6, prod6beta1), Cameras/fov.cc (1.12), Cameras/mapmtpix.cc (1.6), Cameras/modular_camera.cc (1.14), Cameras/smartpix.cc (1.8, prod6beta1), Mirrors/conical_taylor.cc (1.3, prod6beta1), Mirrors/plot_mirrors.c (1.10, prod6beta1), doc_src/simtel_doc.h (1.3, prod6beta1), util/norm_spe.cc (1.8, prod6beta1): Fix a few bits and pieces in doxygen reference documentation. 2020-11-03 22:38 bernlohr * common/mc_aux.h (1.193), common/sim_config.c (1.205), common/sim_signal.c (1.107), common/sim_telarray.c (1.169), hess/hess_defaults.h (1.139), hess/sim_conv2hess.c (1.125): Keep track of ideal Cherenkov signal (without NSB) in whole camera and display it in the logs together with triggered pixels and sectors. Pointing direction and source direction are irrelevant when optics is bypassed. 2020-11-03 15:03 bernlohr * LightEmission/: Doxyfile (1.5), IactLightEmission.cc (1.12), IactLightEmission.hh (1.16), ile_version.hh (1.1): Allow for a version string of the IactLightEmission package to be reported in the history data block. 2020-11-03 14:47 bernlohr * LightEmission/xyzls.cc (1.3): With the number of photons to be emitted per event turned into a vector of numbers, a single simulation run can now cover multiple intensities. In contrast to the sim_telarray built-in laser calibration events (which supports up to ten intensities), this has no intrinsic limit in the number of different intensities. Each intensity will be simulated for the given number of events. 2020-11-03 14:42 bernlohr * LightEmission/: ff-1m.cc (1.7), ff-gct.cc (1.6), ls-beam.cc (1.5), pixled.cc (1.7), xyls.cc (1.3): Add the command line used to run these tools to the history data block (like comment in fake CORSIKA inputs file). 2020-11-03 14:40 bernlohr * LightEmission/: IactLightEmission.cc (1.11), IactLightEmission.hh (1.15), Makefile (1.19): Add code from stdtools to convert comma-separated lists of floating point numbers into vectors of double, and vice versa. For further use of features from stdtools, the WITH_STDTOOLS gets defined during compilation if the stdtools code can be located. 2020-10-28 15:03 bernlohr * LightEmission/Doxyfile (1.4): Update date. 2020-10-26 21:11 bernlohr * LightEmission/: Makefile (1.18), xyls.cc (1.2), xyzls.cc (1.2): Enhance xyzls functionality. 2020-10-05 16:54 bernlohr * common/sim_config.c (1.204): Shift using NSB sky map boundaries after check. 2020-09-29 15:54 bernlohr * common/sim_telarray.c (1.168): Let '--version' directly report a CTA_PROD5 compile-time define. 2020-09-29 14:23 bernlohr * cfg/hess2/: AzAlt_CRAB_35_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_CRAB_35_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), AzAlt_CRAB_40_CT4_NSB_corr_AzCorr_bigfov-wrap.txt (1.1), AzAlt_CRAB_40_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_CRAB_40_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), AzAlt_CRAB_44.5_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_CRAB_44.5_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), AzAlt_PKS2155_60_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_PKS2155_60_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), AzAlt_PKS2155_70_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_PKS2155_70_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), AzAlt_PKS2155_80_CT4_NSB_corr_AzCorr_bigfov.txt (1.1), AzAlt_PKS2155_80_CT5_NSB_corr_AzCorr_bigfov_rescaled.txt (1.1), hess-phase2d2-Crab-Alt35.cfg (1.1), hess-phase2d2-Crab-Alt40.cfg (1.1), hess-phase2d2-Crab-Alt44.5.cfg (1.1), hess-phase2d2-PKS2155-Alt60.cfg (1.1), hess-phase2d2-PKS2155-Alt70.cfg (1.1), hess-phase2d2-PKS2155-Alt80.cfg (1.1) (utags: phase2d3, prod6beta1): Add configuration and NSB maps used for Crab and PKS 2155 special simulations. 2020-09-29 11:50 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.13): Asum_threshold specific for LST-1 prototype was only intended for mono trigger. 2020-08-28 18:20 bernlohr * common/sim_config.c (1.203): The interpolation in NSB sky maps may need to rotate 360 deg right or left in order to be in range of the map. 2020-08-25 18:18 bernlohr * corsika/: README (1.102), README.tex (1.91): Minor updates to README file. 2020-08-25 17:56 bernlohr * corsika/atmo.c (1.51): Fix loop variable definitions in test-only code which require C99 or better. 2020-08-25 17:42 bernlohr * corsika/atmo.c (1.50): Remove test for condition which is always true. 2020-08-21 17:22 bernlohr * common/sim_config.c (1.202), doc_src/sim_hessarray.tex (1.119): Support and document the TYPELIST hconfig function. 2020-08-12 13:39 bernlohr * cfg/hess2/hess-phase2d.cfg (1.16): Use mt19937 random generator also for HESS simulations. 2020-08-12 12:55 bernlohr * cfg/hess2/hess-phase2d.cfg (1.15), common/mc_aux.h (1.192), hess/hess_defaults.h (1.138): More tuning for HESS phase2d2 simulations. 2020-08-08 19:24 bernlohr * p4eff.sh (1.11), p4eff_all.sh (1.8, prod6beta1), cfg/hess2/hess-phase2d.cfg (1.14): Need to adapt p4eff tool to changes in hconfig. 2020-08-08 19:20 bernlohr * common/mc_aux.h (1.191): Use a CTA_PROD5 definition as a short-cut how prod-5 was set up (i.e. CTA_PROD4 and MAXIMUM_TELESCOPES=180). 2020-08-08 17:43 bernlohr * cfg/common/Benn_LaPalma_sky_converted.lis (1.6, prod6beta1): Fix comment on definition of AB magnitude system. 2020-08-07 20:49 bernlohr * corsika/: README (1.101), README.tex (1.90), atmo.c (1.49), corsika.dox (1.40), iact.c (1.130), iact_full5.c (1.132): Fix in 1.62 for rounding error in top of atmosphere altitude which could result in zero density returned. 2020-08-06 01:09 bernlohr * hess/Makefile.hess (1.268), util/Makefile (1.9), util/sspp.c (1.3, prod6beta1): Allow for compressed input files with sspp. 2020-08-05 18:35 bernlohr * cfg/hess2/hess-phase2d.cfg (1.13): A few parameter updates for HESS phase2d2. 2020-08-04 14:02 bernlohr * util/sspp.c (1.2): Fix typo in sspp utility (preventing proper loading of the global configuration unless it was with a numeric identifier, i.e. '0'). 2020-08-04 14:01 bernlohr * doc_src/sim_hessarray.tex (1.118): Cosmetic documentation updates. 2020-08-04 00:09 bernlohr * common/sim_config.c (1.201), doc_src/sim_hessarray.tex (1.117), hess/Makefile.hess (1.267), hess/hess_defaults.h (1.137), util/Makefile (1.8), util/pfp.c (1.19), util/sspp.c (1.1): An alternate and very much simplified preprocessor which just select lines from a prior LIST=all configuration call. 2020-08-03 11:22 bernlohr * corsika/: corsika_build_script (1.11), gen_config (1.20): Make the corsika_build_script and gen_config aware of the vector-optimized Cherenkov option, although they do not deal with the extra code themselves. 2020-08-02 22:50 bernlohr * hess/Makefile.hess (1.266), util/Makefile (1.7), util/pfp.c (1.18), util/tinyexpr.c (1.1), util/tinyexpr.h (1.1, prod6beta1): Add numerical expression evaluation feature to preprocessor. 2020-08-01 00:44 bernlohr * common/sim_config.c (1.200), doc_src/sim_hessarray.tex (1.116), param_comp/astri_param_evo.sh (1.4, prod6beta1), param_comp/mk_astri_param_evo.sh (1.4, prod6beta1), param_comp/mk_param_comp.sh (1.13), param_comp/mk_param_evo.sh (1.28), param_comp/param_comp.sh (1.10), param_comp/param_comp_hess.sh (1.5): Adapt to the extra hconfig value reporting options and make use of them. 2020-08-01 00:42 bernlohr * p4eff.sh (1.10), p4eff_all.sh (1.7): Add HESS phase2d2 efficiencies. 2020-08-01 00:40 bernlohr * cfg/hess2/hess-phase2d.cfg (1.12): Working on HESS phase2d2 configuration parameter set. 2020-07-27 17:40 bernlohr * corsika/: atmo.c (1.48), iact.c (1.129), iact_full5.c (1.131): Comments in source code. 2020-07-16 21:44 tag prod5 2020-07-16 21:44 bernlohr * param_comp/: astri_param_evo.sh (1.3), mk_astri_param_evo.sh (1.3), mk_param_comp.sh (1.12), mk_param_evo.sh (1.27), param_comp.sh (1.9), param_comp_hess.sh (1.4) (utags: prod5): Add reference to SST-prod-4 and prod-5 production versions. Use local rather than global tmp directory. 2020-07-04 21:02 bernlohr * cfg/hess2/hess-phase2d.cfg (1.11, prod5): Restore original phase2d0 and phase2d1 parameters despite prod-5 related changes to FlashCam configuration. Start with set-up for phase2d2. 2020-06-28 23:23 bernlohr * cfg/CTA/: CTA-PROD4-FlashCam-camera.cfg (1.8), CTA-PROD4-LST.cfg (1.45), CTA-PROD4-MST-NectarCam.cfg (1.23) (utags: prod5): Adjusting length of simulated windows and where to place the signals in them. 2020-06-28 17:56 bernlohr * corsika/corsika.dox (1.39, prod5): New date also for doxygen. 2020-06-28 17:54 bernlohr * corsika/: iact.c (1.128), iact_full5.c (1.130) (utags: prod5): Keep version number but update version date. 2020-06-28 13:40 bernlohr * corsika/atmo.c (1.47, prod5): Really ignore the atmospheric line with zero density or refractivity, not just cause an error (although that may be good as well). 2020-06-28 12:50 bernlohr * cfg/CTA/: atmprof_ecmwf_north_intermediate_fixed.dat (1.2), atmprof_ecmwf_north_summer_fixed.dat (1.2), atmprof_ecmwf_north_winter_fixed.dat (1.2), atmprof_ecmwf_south_summer_fixed.dat (1.2), atmprof_ecmwf_south_winter_fixed.dat (1.2) (utags: prod5, prod6beta1): Regenerated and fixed 'fixed' atmospheric profiles. 2020-06-28 12:37 bernlohr * corsika/atmo.c (1.46): Reject atmospheric profile lines with zero density or refractivity. These can seriously mess up the cubic-spline interpolation. 2020-06-27 21:37 bernlohr * util/extract_corsika_tel.c (1.7, prod5): Allow extracting a single event. 2020-06-27 21:36 bernlohr * common/sim_telarray.c (1.167, prod5): Add info for user if specifying the maximum_telescopes run-time parameter was forgotten. 2020-06-26 12:00 bernlohr * hess/Makefile.hess (1.265, prod5): Also need to export the fixed atmospheric profiles. 2020-06-26 11:56 bernlohr * cfg/CTA/: atmprof_ecmwf_north_intermediate_fixed.dat (1.1), atmprof_ecmwf_north_summer_fixed.dat (1.1), atmprof_ecmwf_north_winter_fixed.dat (1.1), atmprof_ecmwf_south_summer_fixed.dat (1.1), atmprof_ecmwf_south_winter_fixed.dat (1.1): Fixing La Palma and Paranal atmospheric profiles derived from ECMWF weather models for self-consistency in extrapolated density (above 50 km altitude) and in atmospheric thickness. 2020-06-22 13:25 bernlohr * rndm_gsl.c (1.1), test_gsl.sh (1.1) (utags: prod5, prod6beta1): Add test if compiling/linking with GSL for random number generators does work. 2020-06-21 23:44 bernlohr * hess/Makefile.hess (1.264), cfg/CTA/atmprof_ecmwf_north_intermediate_nexp.dat (1.1, prod6beta1, prod5), cfg/CTA/atmprof_ecmwf_north_summer_nexp.dat (1.1, prod6beta1, prod5), cfg/CTA/atmprof_ecmwf_north_winter_nexp.dat (1.1, prod6beta1, prod5), cfg/CTA/atmprof_ecmwf_south_summer_nexp.dat (1.1, prod6beta1, prod5), cfg/CTA/atmprof_ecmwf_south_winter_nexp.dat (1.1, prod6beta1, prod5): Add atmospheric profiles for La Palma and Paranal as derived by Pere Munar-Adrover & Markus Gaug. 2020-06-21 23:17 bernlohr * multi/multi_cta-prod5-lapalma-baseline.cfg (1.4, prod5): Fix typo. 2020-06-18 12:13 bernlohr * doc_src/sim_hessarray.tex (1.115, prod5): Fix variable type for camera_body_shape. 2020-06-18 03:36 bernlohr * LightEmission/Makefile (1.17, prod5), hess/Makefile.hess (1.263): Linking explicitely also with '-lgslcblas' as not every system seems to find that automatically when linking with '-lgsl'. 2020-06-17 15:30 bernlohr * cfg/CTA/CTA-PROD4-site.cfg (1.6, prod5), cfg/CTA/CTA-PROD5-LaPalma-baseline.cfg (1.6, prod5), cfg/CTA/CTA-PROD5-Paranal-baseline.cfg (1.5, prod5), multi/multi_cta-prod5-lapalma-baseline.cfg (1.3), multi/multi_cta-prod5-paranal-baseline.cfg (1.3, prod5): Fix array configuration files (name clashes, etc.). 2020-06-17 03:48 bernlohr * generic_run.sh (1.45, prod5), cfg/CTA/CTA-PROD4-site.cfg (1.5), cfg/CTA/CTA-PROD5-LaPalma-baseline.cfg (1.5), cfg/CTA/CTA-PROD5-Paranal-baseline.cfg (1.4), cfg/CTA/array_trigger_prod4_lapalma_baseline.dat (1.3, prod6beta1, prod5), cfg/CTA/array_trigger_prod5_lapalma_baseline.dat (1.2, prod6beta1, prod5), cfg/CTA/array_trigger_prod5_lapalma_extended.dat (1.1, prod5), cfg/CTA/array_trigger_prod5_paranal_extended.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2147_1_10_0_0_2147.dat (1.2, prod6beta1, prod5), common/sim_telarray.c (1.166), hess/Makefile.hess (1.262), multi/multi_cta-prod5-lapalma-baseline.cfg (1.2), multi/multi_cta-prod5-paranal-baseline.cfg (1.2): Getting the prod-5 array-level settings to work, including true baseline and the extended version with extra telescopes. 2020-06-15 00:40 bernlohr * cfg/CTA/: CTA-PROD4-FlashCam-camera.cfg (1.7), CTA-PROD4-LST.cfg (1.44), CTA-PROD4-MST-NectarCam.cfg (1.22), CTA-PROD4-SST-CHEC-S-camera.cfg (1.18, prod5): Update camera version strings. 2020-06-15 00:33 bernlohr * generic_run.sh (1.44), cfg/CTA/CTA-PROD4-FlashCam-camera.cfg (1.6), cfg/CTA/CTA-PROD4-LST.cfg (1.43), cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.16, prod5), cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.21), cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.17): Updating threshold settings. 2020-06-10 12:17 bernlohr * cfg/CTA/CTA-PROD4-FlashCam-camera.cfg (1.5): Adapt fadc_amplitude such that the single-p.e. peak is at 10.0 like originally adapted with the old single-p.e. amplitude distribution. Adapt the digital sum pre-scaling the compensate for that in order to keep the thresholds as they used to be. 2020-06-09 19:29 bernlohr * common/rndm2.c (1.10, prod6beta1, prod5): Fix code requiring C99. 2020-06-09 18:40 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.42): Make the 'processed' pedestal values the default and adapt maximum ranges, exceeding the 12-bit limit but matching the 12-bit limit an raw data. 2020-06-08 23:03 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.15, prod5): Adapt mirror alignment parameters for MSTs, including zenith angle dependence, to finite element calculations for redesigned camera support structure. 2020-06-04 09:28 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.41), CTA-PROD4-MST-optics.cfg (1.14): Equalized LST pedestal values are just an option for now. MST PSF being worked on but alignment versus zenith angle still needs more tuning. 2020-06-04 00:40 bernlohr * common/sim_config.c (1.199, prod5), common/sim_imaging.c (1.103, prod5), doc_src/sim_hessarray.tex (1.114): Resurrect proper use of random focal length and describe it in more detail in the manual. 2020-05-31 00:10 bernlohr * sim_hessarray.dox (1.19, prod5): Update date on title page of source code documentation. 2020-05-31 00:02 bernlohr * cfg/CTA/: CTA-PROD4-MST-FlashCam.cfg (1.15), CTA-PROD4-MST-NectarCam.cfg (1.20): Update NSB estimates. 2020-05-30 19:17 bernlohr * common/mc_aux.h (1.190, prod5), common/sim_config.c (1.198), common/sim_telarray.c (1.165), doc_src/sim_hessarray.tex (1.113), hess/sim_conv2hess.c (1.124, prod5): Add command line options '-n' and '-r' for replacing an existing output file rather than appending to it. 2020-05-30 18:49 bernlohr * common/sim_config.c (1.197), doc_src/sim_hessarray.tex (1.112): Stricter check for working main configuration file. Divergent pointing with negative convergent_height or convergent_depth should now work. 2020-05-29 13:39 bernlohr * common/sim_config.c (1.196): More checks for stupid input tables. Option for more verbose output in configuration stage. 2020-05-27 19:01 bernlohr * param_comp/: mk_param_comp.sh (1.11), param_comp_hess.sh (1.3): Allow for HESS-only comparison, with a few more recent configurations, but far from all ever simulated. 2020-05-25 22:43 bernlohr * cfg/CTA/CTA-PROD5-LaPalma-baseline.cfg (1.4), cfg/CTA/CTA-PROD5-Paranal-baseline.cfg (1.3), cfg/CTA/array_trigger_prod5_lapalma_baseline.dat (1.1), cfg/CTA/array_trigger_prod5_paranal_baseline.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.261), multi/multi_cta-prod5-lapalma-baseline.cfg (1.1): Pipeline glue script for prod-5 on La Palma added. Array trigger configurations including duplicated MSTs with alternate camera type. 2020-05-25 16:08 bernlohr * cfg/CTA/: CTA-PROD5-LaPalma-baseline.cfg (1.3), CTA-PROD5-Paranal-baseline.cfg (1.2): Prepare for duplicated baseline MST positions, to be simulated with the other camera type. 2020-05-25 15:47 bernlohr * corsika/README (1.100, prod5): File sizes reported in generated README file. 2020-05-25 15:34 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.19): Various parameter updates. 2020-05-25 15:33 bernlohr * cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.14): Add comment about not using camera depth parameter. 2020-05-25 15:32 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.13): Update telescope_transmission and camera body parameters. 2020-05-25 15:28 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.40), CTA-PROD4-pmt.cfg (1.7, prod6beta1, prod5): Update PMT transit time parameters. 2020-05-25 15:26 bernlohr * hess/Makefile.hess (1.260): Exporting also 'noshift' variant of NectarCam pulse shape. 2020-05-25 15:06 bernlohr * cfg/CTA/Pulse_template_nectarCam_17042020-noshift.dat (1.1, prod6beta1, prod5): Pulse shape as provided by T. Armstrong as an alternative to the one with the peak position shifted into the same place as previous versions. 2020-05-25 13:34 bernlohr * common/sim_telarray.c (1.164): Add missing reset for photons in 300-550 nm range (for -DSTORE_PIX_PHOTONS=2 variant only). 2020-05-23 19:38 bernlohr * common/sim_imaging.c (1.102): Fix typo in shadowing by square camera with depth in single-reflector telescope. 2020-05-21 14:00 bernlohr * Cameras/showcam.gpl.sh (1.19, prod6beta1, prod5): Update camera images to current state. 2020-05-12 22:28 bernlohr * corsika/: README (1.99), README.tex (1.89, prod5): Mention compatibility with CC 10.1. 2020-05-12 22:13 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.39): Update PMT voltages in use for LSTs (for transit time calculation). 2020-05-12 18:44 bernlohr * LightEmission/IactLightEmission.hh (1.14, prod5): Fix a g++ 10.1 warning. 2020-05-12 18:40 bernlohr * common/rpolator.c (1.25, prod6beta1, prod5): Fix a gcc 10.1 warning of little practical relevance. 2020-05-12 18:36 bernlohr * corsika/Makefile.dist (1.84, prod5): Add compilation test specialized to C++ compiler. 2020-05-12 17:07 bernlohr * common/rpolator.c (1.24): Avoid interfering with non-glibc system for the new workaround. 2020-05-12 16:23 bernlohr * common/rpolator.c (1.23): Workaround for missing string function when compiling in pure C99 mode. 2020-05-12 16:22 bernlohr * common/sim_config.c (1.195): Reset some of the default parameters before processing telescope-specific values to avoid mixing where number of parameters differs. 2020-05-12 16:17 bernlohr * corsika/: Makefile.dist (1.83), README (1.98), README.tex (1.88), atmo.c (1.45): More compilation tests. Avoid vectorized raybnd without C99 language features. 2020-05-11 18:13 bernlohr * corsika/: README.tex (1.87), iact.c (1.127), iact_full5.c (1.129): Fix bad change from calloc to malloc. Fix two more valgrind warnings. 2020-05-11 15:42 bernlohr * cfg/CTA/CTA-PROD4-pmt.cfg (1.6), cfg/CTA/spe_LST_2020-05-09_AP2.0e-4.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.259): Replace prod-2 single-p.e. response with new one adapted to LST measurements. 2020-05-11 15:36 bernlohr * corsika/: Makefile.dist (1.82), README (1.97), README.tex (1.86), atmo.c (1.44), atmo.h (1.13, prod5), corsika.dox (1.38), iact.c (1.126), iact_full5.c (1.128): New IACT/ATMO version 1.62 includes vectorized raybnd version contributed by L. Arrabito. 2020-05-08 17:29 bernlohr * util/norm_spe.cc (1.7, prod5): Add option to scale level of afterpulsing folded together with the prompt spectrum. 2020-05-08 10:20 bernlohr * hess/Makefile.hess (1.258), util/norm_spe.cc (1.6): Extending norm_spe tool for enabling it to fold in new afterpulse spectra, rebin, clip etc. 2020-05-07 17:08 bernlohr * common/rpolator.c (1.22): No text output to stdout unless verbose > 0 or info gets requested. 2020-05-04 17:24 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.38): Change of pedestal values. 2020-05-02 17:25 bernlohr * param_comp/.cvsignore (1.1, prod6beta1, prod5): List of files generated rather than preserved in CVS getting longer. 2020-05-02 17:20 bernlohr * param_comp/mk_param_evo.sh (1.26): Mark dual-mirror parameters as irrelevant for single-reflector telescopes and vice versa. Skip most 2018 versions unless asking for full history. 2020-05-02 14:04 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.37), cfg/CTA/CTA-PROD4-pmt.cfg (1.5), doc_src/sim_hessarray.tex (1.111): Using new way of correspondence between voltage and transit time changes to general PMT confiuration (affecting also MST cameras) and, with dedicated values, to LST cameras. 2020-05-02 11:49 bernlohr * common/mc_aux.h (1.189), common/sim_config.c (1.194), common/sim_signal.c (1.106, prod5), doc_src/sim_hessarray.tex (1.110), hess/hess_defaults.h (1.136, prod5): Include stabilized first dynodes in pixel-specific transit time calculations. 2020-05-01 22:45 bernlohr * generic_run.sh (1.43), hess/Makefile.hess (1.257), multi/multi_cta-prod5-paranal-baseline.cfg (1.1): Make prod5 baseline runs actually work. 2020-05-01 22:43 bernlohr * cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.19, prod6beta1, prod5): Even though the digital sum trigger pulse shaping in floating point cannot be used with current code (unless compiled with -DSUM_DOUBLE), insert some minimal compatibility update in the configuration so that prod3(b) simulations still work - although results would likely differ from actual prod3(b). 2020-05-01 22:31 bernlohr * common/: sim_config.c (1.193), sim_signal.c (1.105), sim_telarray.c (1.163): Fixing a couple of warnings from valgrind memory checks, with one pf those looking like allocating too little memory in some circumstances (with possible writing into other memory later-on). Better fix it now. 2020-04-30 22:55 bernlohr * param_comp/mk_param_evo.sh (1.25): Put a reminder into the parameter evolution files that the config files will remain the same in the evolution into prod5. 2020-04-30 22:54 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.36): Remove misplace character in NSB level setting. 2020-04-30 09:54 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.35): Set low-gain amplitude to match design HG/LG ratio. 2020-04-29 17:47 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.34): Impact of latest reflectivity curve on NSB and changed amplitude, noise, and pedestal parameters for LST cameras. 2020-04-29 15:43 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.33), cfg/CTA/ref_LST_2020-04-23.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.256): Using the latest LST reflectivity curve. 2020-04-29 14:48 bernlohr * cfg/CTA/ref_LST_2020-04-21.dat (1.2, prod6beta1, prod5): Use proper comment characters although rpolator can handle the '%' as well. 2020-04-29 14:46 bernlohr * cfg/CTA/pulse_LST_8dynode_pix6_20200204.dat (1.4, prod6beta1, prod5): Add comment about pulse shape integrals. 2020-04-21 23:43 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.18): Updating sampling frequency. 2020-04-21 23:38 bernlohr * hess/Makefile.hess (1.255): Exporting new SCT PDE and new LST reflectance. 2020-04-21 23:37 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.32), ref_LST_2020-04-21.dat (1.1): New reflectance curve for LST, with resulting change in NSB rates. 2020-04-21 23:36 bernlohr * cfg/CTA/: CTA-PROD4-SCT.cfg (1.11), PDE_FBK_final_calibrated.dat (1.1, prod6beta1) (utags: prod5): Updating SC-MST sensor PDE, with resulting change in NSB estimate. 2020-04-21 16:29 bernlohr * hess/Makefile.hess (1.254): Path of a config data file to be exported was bad. 2020-04-20 18:36 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.17): Update agreed parameters according to Redmine Task 21838. Update NSB p.e. rates. 2020-04-20 18:33 bernlohr * cfg/CTA/: CTA-PROD4-LST-prototype.cfg (1.12, prod5), CTA-PROD4-LST.cfg (1.31): Fix selection of mirror lists for individual LSTs. Match measured on-axis PSF. Update NSB p.e. rates. 2020-04-20 18:29 bernlohr * cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.13): Update dark-sky NSB pixel p.e. rates. 2020-04-20 18:23 bernlohr * hess/Makefile.hess (1.253): Fix exporting LST funnel efficiency table. Add single-p.e. distribution and pulse shape updates for NectarCam. 2020-04-20 18:21 bernlohr * param_comp/: mk_param_comp.sh (1.10), param_comp.sh (1.8): Separate LST parameters in comparison. 2020-04-20 18:20 bernlohr * p4eff.sh (1.9), p4eff_all.sh (1.6) (utags: prod5): Individual LST efficiencies evaluated. 2020-04-20 18:18 bernlohr * common/sim_imaging.c (1.101): Fix printing error messages about missing/invalid funnel tables. 2020-04-16 21:05 bernlohr * cfg/CTA/: CTA-PROD5-LaPalma-baseline.cfg (1.2), CTA-PROD5-Paranal-baseline.cfg (1.1): Preliminary assignment of telescope types, so far matching original baseline layouts. Also setting CTA_NORTH / CTA_SOUTH to distinguish individual differences in telescope configurations (like with LSTs). 2020-04-16 21:03 bernlohr * cfg/CTA/CTA-PROD5-SST.cfg (1.1, prod6beta1, prod5): The SST for prod-5 will be assumed to match ASTRI+CHEC-S from the prod-4-SST production. 2020-04-16 21:00 bernlohr * cfg/CTA/: CTA-PROD4-LST-prototype.cfg (1.11), CTA-PROD4-LST.cfg (1.30), CTA-PROD4-common.cfg (1.5, prod5), CTA-PROD4-site.cfg (1.4): Use new LST camera configurations and new QE curves, both distinguished by CTA_NORTH and CTA_SOUTH definitions. 2020-04-16 20:57 bernlohr * cfg/CTA/CTA-LST_lightguide_eff_2020-04-12_average.dat (1.1, prod6beta1, prod5): New LST lightguide efficiency has a 4-5 degrees wider acceptance than the previous version. So far only using a weighted average over wavelengths. 2020-04-16 20:54 bernlohr * cfg/CTA/: camera_CTA-LST-1_analogsum21_v2020-04-14.dat (1.2), camera_CTA-LST-234_analogsum21_v2020-04-14.dat (1.2) (utags: prod5, prod6beta1): Recently added LST camera configuration files now with new and wider lightcone efficiency table. 2020-04-16 20:52 bernlohr * cfg/CTA/: qe_lst1_20200318_high+low.dat (1.1), qe_lst2-4_20200318_high+low.dat (1.1) (utags: prod5, prod6beta1): New QE curves for LST-1 and LST-2/3/4 separately, including (though not used directly by sim_telarray) also the lower QE applying for the outer pixels. 2020-04-15 15:03 bernlohr * cfg/CTA/: mirror_CTA-N-LST2_v2020-04-07.dat (1.1), mirror_CTA-N-LST3_v2020-04-07.dat (1.1), mirror_CTA-N-LST4_v2020-04-07.dat (1.1), mirror_CTA-S-LST_v2020-04-07.dat (1.1) (utags: prod5, prod6beta1): New mirror definitions for LST 2-4 (North) and for South LSTs. 2020-04-14 19:20 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.29), hess/Makefile.hess (1.252): Activate the separate QE curves for LST-1 and LST-2/3/4. 2020-04-14 18:39 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.10), cfg/CTA/CTA-PROD4-LST.cfg (1.28), cfg/CTA/CTA-PROD5-LaPalma-baseline.cfg (1.1), cfg/CTA/camera_CTA-LST-1_analogsum21_v2020-04-14.dat (1.1), cfg/CTA/camera_CTA-LST-234_analogsum21_v2020-04-14.dat (1.1), common/sim_imaging.c (1.100), hess/Makefile.hess (1.251): LST camera configuration files with pixels of lower QE on the outside. Allow module ID also in decimal (rather than hexadecimal) format when reading this camera configuration. 2020-04-06 12:11 bernlohr * common/mc_aux.h (1.188), common/sim_config.c (1.192), hess/sim_conv2hess.c (1.123): Adding the flat-field correction factors (always included in the calibration coefficients) into the laser calibration data block, so that gain calibration can be studied separately. 2020-04-06 12:10 bernlohr * doc_src/sim_hessarray.tex (1.109): Add description of NSB sky map. 2020-03-26 20:57 bernlohr * sim_hessarray.dox (1.18), doc_src/simtel_doc.h (1.2, prod5): Typos and other fixes in documentation. 2020-03-18 19:34 bernlohr * cfg/hess2/hess-phase2c.cfg (1.13, prod6beta1, phase2d3, prod5): Updating CT5 optical efficiency for phase2c3. 2020-03-17 21:08 bernlohr * cfg/CTA/CTA-PROD4-pmt.cfg (1.4): Change to newer (and lower!) QE for both MST camera types (LST still using curves for 8-stage PMTs). 2020-03-17 21:02 bernlohr * corsika/: iact.c (1.125), iact_full5.c (1.127): Fix incorrectly reported IACT/ATMO version. 2020-03-14 01:07 bernlohr * util/pfp.c (1.17, prod5): Playing with an exists() file test function but so far would break case insensitive behaviour of all other tests so far, thus not active by default. 2020-03-13 01:30 bernlohr * common/sim_signal.c (1.104): Fixed new way of flatfielding. 2020-03-11 15:48 bernlohr * common/sim_signal.c (1.103): Reverting recent change to use of FADC sensitivity in flatfielding for now; it resulted in incorrectly reported calibration coefficients. 2020-03-11 15:47 bernlohr * common/rndm2.c (1.9): Fix warning about signed/unsigned mismatch. 2020-03-10 22:29 bernlohr * corsika/Copyright (1.13, prod5): Bump year in copyright notice. 2020-03-10 19:43 bernlohr * cfg/hess2/hess-phase2c.cfg (1.12): Typo fixed in message line. 2020-03-10 18:36 bernlohr * cfg/hess2/hess-phase2c.cfg (1.11): Fix typo. 2020-03-10 11:03 bernlohr * cfg/hess2/hess-phase2c.cfg (1.10): Fit in optical efficiencies before CT5 camera exchange (phase2c3). 2020-03-08 19:23 bernlohr * cfg/CTA/: CTA-PROD4-LST-prototype.cfg (1.9), CTA-PROD4-LST.cfg (1.27): Dish center is behind axis crossing. Effectively no analog sum clipping. 2020-03-07 23:14 bernlohr * param_comp/mk_param_evo.sh (1.24): Fix spaces in PDF document title. 2020-03-07 22:47 bernlohr * param_comp/: mk_param_comp.sh (1.9), param_comp.sh (1.7): More complete mentioning of prototype values. Do not mention hconfig built-in functions. 2020-03-07 22:46 bernlohr * param_comp/mk_param_evo.sh (1.23): Summarize important changes at the end of the document, with hyperlinks. 2020-03-06 16:04 bernlohr * rx.cc (1.7, prod5): Add options to use lid or 2-f impact x/y rather than on pixel entrance. 2020-02-27 23:04 bernlohr * param_comp/mk_param_evo.sh (1.22): Add option to generate just the current prod4 parameter set instead of the complete selection. 2020-02-27 22:33 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.26): Parameter changes requested by LST team. 2020-02-27 22:30 bernlohr * common/sim_signal.c (1.102): Changing interaction of ADC sensitivity variations with flatfielding. 2020-02-27 22:27 bernlohr * common/rndm2.c (1.8): Flat distribution random numbers produced with GSL generators also excluding zero values as handled so far with the Ranlux generator. 2020-02-26 17:53 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.25): Fix LST electronic noise. 2020-02-24 17:48 bernlohr * doc_src/sim_hessarray.tex (1.108), hess/Makefile.hess (1.250): Documentation updates: preliminary documentation for not yet implemented camera window geometry. 2020-02-24 17:47 bernlohr * corsika/.cvsignore (1.4, prod6beta1, prod5): Ignore remove_extension program. 2020-02-24 16:17 bernlohr * corsika/: Makefile.dist (1.81), iact.c (1.124), iact_full5.c (1.126): Really skip events where televt_ was never called. 2020-02-24 15:37 bernlohr * doc_src/sim_hessarray.tex (1.107): Fix typo in TeX source. 2020-02-24 15:33 bernlohr * common/mc_aux.h (1.187), common/sim_telarray.c (1.162), doc_src/sim_hessarray.tex (1.106), hess/sim_conv2hess.c (1.122): Allow for a compile-time change of the maximum number of shower re-use (CORSIKA inputs first parameter in CSCAT line). Abort on processing CORSIKA IACT data exceeding this limit. 2020-02-21 12:49 bernlohr * cfg/CTA/CTA-PROD4-pmt.cfg (1.3): Update transit time jitter. 2020-02-20 16:14 bernlohr * cfg/CTA/qe_R12992-100-05b.dat (1.1, prod5), hess/Makefile.hess (1.249): Add an alternate set of QE measurements. 2020-02-20 14:47 bernlohr * cfg/CTA/pulse_LST_8dynode_pix6_20200204.dat (1.3): Add institution. 2020-02-20 14:42 bernlohr * corsika/: README (1.96), README.tex (1.85): Update README documentation. 2020-02-20 14:04 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.24), pulse_LST_8dynode_pix6_20200204.dat (1.2): Fix typo in name, used HG digitized channel also for trigger input. 2020-02-20 00:40 bernlohr * param_comp/mk_param_evo.sh (1.21): Include parameter limits with the parameter evolution. 2020-02-19 15:45 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.23), cfg/CTA/pulse_LST_8dynode_pix6_20200204.dat (1.1), hess/Makefile.hess (1.248): Updating digitized pulse shape for LST. 2020-02-18 23:12 bernlohr * LightEmission/IactLightEmission.cc (1.10, prod5), LightEmission/Makefile (1.16), common/rndm2.c (1.7), common/rndm2.h (1.7, prod6beta1, prod5), common/sim_config.c (1.191), common/sim_telarray.c (1.161), doc_src/sim_hessarray.tex (1.105), hess/Makefile.hess (1.247), hess/hess_defaults.h (1.135): Instead of the built-in Ranlux random number generator we can now use random number generators from the GNU Scientific Library. 2020-02-18 22:43 bernlohr * corsika/atmo.c (1.43): More initial layer boundary choices. 2020-02-18 22:42 bernlohr * util/rpolist.c (1.11, prod5): Fine-tuning of printed table output. 2020-02-12 18:10 bernlohr * param_comp/mk_param_comp.sh (1.8): Fix recently introduced duplicated lines in parameter comparison. 2020-02-12 18:08 bernlohr * util/corsika_autoinputs.cc (1.24, prod6beta1, prod5): STEPFC parameter no longer supported together with Cherenkov light in CORSIKA 7.7xxx. 2020-02-12 16:42 bernlohr * Cameras/showcam.gpl.sh (1.18): Some cameras plotted from old configuration files. 2020-02-12 16:01 bernlohr * param_comp/mk_param_evo.sh (1.20): Fixing some recent mess-up in the listed parameter evolution. 2020-02-01 21:20 bernlohr * hess/Makefile.hess (1.246): Re-commit: Adding new transmission table for SCT camera window, triggering a bug in rpolator (now fixed). 2020-02-01 21:15 bernlohr * cfg/CTA/CTA-PROD4-pmt.cfg (1.2), cfg/CTA/transmission_sct_window_2020-01.dat (1.1, prod5), cfg/hess2/hess-phase2d.cfg (1.10), common/rpolator.c (1.21), common/sim_imaging.c (1.99), corsika/GNUmakefile (1.38, prod6beta1, prod5), corsika/Makefile.dist (1.80), corsika/README (1.95), corsika/README.tex (1.84), corsika/corsika.dox (1.37), corsika/iact.c (1.123), corsika/iact_full5.c (1.125), multi/multi_phase2d.cfg (1.1, prod5), util/rpolist.c (1.10): Cumulative re-commit after restoring CVS-archive from backup of 2020-01-15. 2019-12-30 13:26 bernlohr * cfg/hess2/hess-phase2d.cfg (1.9): CT1-4 muon efficiency update for phase2d1. 2019-12-23 20:04 bernlohr * hess/Makefile.hess (1.245): Export both old and new hess-phase2d configuration. 2019-12-23 20:02 bernlohr * cfg/hess2/: hess-phase2d.cfg (1.8), hess-phase2d0.cfg (1.1, prod6beta1, phase2d3, prod5): Rename hess-phase2d.cfg to hess-phase2d0.cfg and add a new cleaned-up version of the phase2d configuration, compatible with the previous version for -DPHASE2D=0 but coming with lower optical efficiency by default. 2019-12-10 15:53 bernlohr * rx.cc (1.6), testeff.c (1.44, prod5), Cameras/drawdrawers.cc (1.5, prod5), Cameras/dsum_patchify.cc (1.3, prod5), Cameras/fov.cc (1.11, prod5), Cameras/hess2pix.cc (1.2, prod6beta1, prod5), Cameras/mapmtpix.cc (1.5, prod5), Cameras/modular_camera.cc (1.13, prod5), Cameras/pixel_remap_trg.cc (1.8, prod5), Cameras/smartpix.cc (1.7, prod5), common/mc_aux.h (1.186), common/rndm_table.c (1.7, prod6beta1, prod5), common/rpolator.c (1.20), common/sim_absorb.c (1.31, prod5), common/sim_signal.c (1.101), common/sim_telarray.c (1.160): Update copyright years according to CVS. 2019-12-06 16:54 bernlohr * sim_hessarray.dox (1.17), doc_src/sim_hessarray.tex (1.104): Minor documentation updates. 2019-12-05 22:24 bernlohr * util/pfp.c (1.16): Increment pfp version number after adding '#include_if_exists' feature. 2019-12-03 18:45 bernlohr * common/: mc_aux.h (1.185), sim_config.c (1.190), sim_imaging.c (1.98), sim_telarray.c (1.159): Towards dual mirror segment misalignment (not functional yet since the initialization of transformations is missing). Use a define rather than fixed hardcoding of the maximum length of shower longitudinal distributions. 2019-11-20 19:10 bernlohr * param_comp/mk_param_evo.sh (1.19): With NectarCam trigger set to majo, all asum parameters are in the irrelevant class. 2019-11-20 18:58 bernlohr * param_comp/mk_param_evo.sh (1.18): The CONFIG_RELEASE parameter gets handled separately. 2019-11-20 17:53 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.16), cfg/CTA/camera_CTA-MST-NectarCam_20171006_majority-3nn.dat (1.3, prod6beta1, prod5), cfg/CTA/camera_CTA-MST-NectarCam_20191120_majority-3nn.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.244): Reverting todays change to existing camera config file and adding a new file that just differs in one line for the cone efficiency table. 2019-11-20 15:53 bernlohr * hess/Makefile.hess (1.243): Adding new NectarCam lightcone efficiency to list of exported files. 2019-11-20 15:48 bernlohr * cfg/CTA/: CTA-PROD4-MST-NectarCam.cfg (1.15), NectarCAM_lightguide_efficiency_POP_131019.dat (1.1, prod6beta1, prod5), camera_CTA-MST-NectarCam_20171006_majority-3nn.dat (1.2): Switching to new lightcone efficiency table. 2019-11-20 15:35 bernlohr * cfg/config_release.cfg.template (1.4, prod6beta1, prod5): More fall-back options when generating config_release.cfg. 2019-11-19 16:27 bernlohr * TestCases/: Makefile (1.1), test_baffle.c (1.1, prod6beta1) (utags: prod5): Testcase utility for the baffle intersection code. 2019-11-19 16:25 bernlohr * common/mc_aux.h (1.184), common/sim_config.c (1.189), common/sim_imaging.c (1.97), doc_src/sim_hessarray.tex (1.103): Supporting conical baffles. 2019-11-11 17:55 bernlohr * common/mc_aux.h (1.183), common/sim_config.c (1.188), common/sim_telarray.c (1.158), hess/hess_defaults.h (1.134): Implementing board (card) wise as well as module-wise random dead pixels. Fake trigger can be forced to cover the zero p.e. case as well. 2019-11-11 17:53 bernlohr * hess/Makefile.hess (1.242), doc_src/sim_hessarray.tex (1.102), doc_src/fig/CTA-20180920-ParametersOpticsSCT-v-1-2.eps (1.1, prod6beta1, prod5), doc_src/fig/CTA-20180920-ParametersOpticsSCT-v-1-2.pdf (1.1, prod6beta1, prod5): Documentation updates, covering new features and coordinate definitions as well as telescope geometry illustration. 2019-11-04 11:34 bernlohr * sim_hessarray.dox (1.16), doc_src/simtel_doc.h (1.1), hess/Makefile.hess (1.241): Minor source code documentation updates. 2019-10-31 16:55 bernlohr * common/sim_config.c (1.187), hess/hess_defaults.h (1.133): Randomly set dead pixels. Board/module-wise version of that is incomplete. 2019-10-31 16:53 bernlohr * cfg/: config_release.cfg.template (1.3), CTA/CTA-PROD4-common.cfg (1.4): Use the new '#include_if_exists' pfp feature to load the configuration release text - if it exists. 2019-10-31 16:52 bernlohr * doc_src/sim_hessarray.tex (1.101): A few sim_telarray parameters were missing from the documentation. 2019-10-31 16:39 bernlohr * util/pfp.c (1.15): Make the '#include_if_exists' feature testable. 2019-10-18 18:10 bernlohr * corsika/: corsika-76900-bernlohr-Makefile.am.patch (1.1), corsika-76900-cerlde.patch (1.1) (utags: prod5, prod6beta1): Add two recently used CORSIKA patches to CVS. 2019-10-18 16:03 bernlohr * param_comp/: mk_param_comp.sh (1.7), mk_param_evo.sh (1.17): Sort all the parameter lists for easier comparison. 2019-10-18 16:02 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.14): Update camera_config_version. 2019-10-18 13:08 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.13), cfg/CTA/camera_CTA-LST_analogsum21_v2019-03-01.dat (1.2, prod6beta1, prod5), cfg/CTA/camera_CTA-MST-NectarCam_20171006_majority-3nn.dat (1.1), hess/Makefile.hess (1.240): Change NectarCam camera definition to newer pixel ordering, with old 3nn majority trigger ported to new pixel IDs. 2019-10-16 15:34 bernlohr * cfg/config_release.cfg.template (1.2), util/pfp.c (1.14): Define DATE and DATETIME macros in the preprocessor (UTC, ISO 8601). 2019-10-16 15:32 bernlohr * hess/Makefile.hess (1.239): Include the cfg path itself also in CONFIG_INCLUDE_PATH. 2019-10-16 14:47 bernlohr * util/pfp.c (1.13): Support optional includes with '#include_if_exists' instruction (corresponding to a C/C++ pre-processor include enclosed in '#if __has_include(...)' / #endif). 2019-10-16 14:15 bernlohr * common/sim_config.c (1.186), hess/hess_defaults.h (1.132): Just in case the config_release.cfg actually gets included by the configuration. 2019-10-15 13:49 bernlohr * common/sim_telarray.c (1.157): If no relevant environment variables are found, at a line of output telling that. 2019-10-09 12:20 bernlohr * Cameras/pixel_remap_trg.cc (1.7): Wrong units attempted in rotation. Also need to drop blank after '+'. 2019-10-08 16:04 bernlohr * Cameras/Makefile (1.8, prod5): iMake sure we try to build the stdtools dependent program only if we find stdtools in the expected place. 2019-10-08 15:54 bernlohr * corsika/: Makefile.dist (1.79), README (1.94), README.tex (1.83): Small updates to documentation. 2019-10-08 15:45 bernlohr * Cameras/: Makefile (1.7), drawdrawers.cc (1.4), dsum_patchify.cc (1.2), fov.cc (1.10), hesspix2.c (1.2, prod6beta1, prod5), pixel_remap_trg.cc (1.6): Building of some of the camera tools seems to be broken. 2019-09-18 13:30 bernlohr * cfg/CTA/: QE_hamamatsu_R19200_prod3_v2.txt (1.1), camera_CTA-LST_analogsum21_v2019-03-01_rot.dat (1.1), spe_NectarCam_2019-03-14.dat (1.1) (utags: prod5, prod6beta1): A few configuration data file not in CVS yet (not all actually used). 2019-09-18 13:08 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.22): There was one asum_threshold missing from recent changes. 2019-09-11 18:51 bernlohr * common/: sim_config.c (1.185), sim_telarray.c (1.156): Report even more (all?) C preprocessor defines and environment variables used in the code. 2019-09-11 17:22 bernlohr * common/mc_aux.h (1.182): Fix typo in debug macro definition. 2019-09-09 17:30 bernlohr * hess/Makefile.hess (1.238): Export config_release.cfg also to sim_telarray_config_common.tar.gz. 2019-09-09 17:22 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.12): Set NectarCam discriminator gate width and hysteresis as discussed. 2019-09-09 17:17 bernlohr * cfg/CTA/camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_Prod3.dat (1.2, prod5): SCT camera config file with comma-separated pre-sum trigger patterns. 2019-09-05 21:36 bernlohr * Copyright (1.7, prod5): Add another year to Copyright file. 2019-09-05 20:58 bernlohr * hess/Makefile.hess (1.237): Fix exporting cfg/config_release.cfg. 2019-09-05 20:52 bernlohr * cfg/config_release.cfg.template (1.1), hess/Makefile.hess (1.236): Automatically reproduce the RELEASE text in version.h as a config file which gets exported together with the sim_telarray_config.tar.gz package. 2019-09-05 19:03 bernlohr * cfg/CTA/: CTA-PROD4-LaPalma-baseline.cfg (1.5), CTA-PROD4-Paranal-baseline.cfg (1.5) (utags: prod5, prod6beta1): Set the array_config_variant parameter (which is not much more than a comment for metadata) only after fixing the MST and SST types. 2019-09-03 18:42 bernlohr * corsika/corsika.dox (1.36): Include mc_atmprof.c and mc_atmprof.h in generated documentation. 2019-09-03 16:54 bernlohr * LightEmission/Makefile (1.15), corsika/atmo.c (1.42), corsika/gen_config (1.19, prod5), hess/Makefile.hess (1.235): Fixes for proper building with CORSIKA 7.7000. 2019-09-02 19:29 bernlohr * param_comp/mk_param_evo.sh (1.16): Sort parameters. Update list of global parameters. 2019-09-02 18:44 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.11), cfg/CTA/Pulse_template_nectarCam_22112018.dat (1.1, prod6beta1, prod5), cfg/CTA/spe_afterpulse_pdf_NectarCam_14032019.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.234): Updating more parameters for NectarCam, including new pulse shape and single-p.e. amplitude distribution. 2019-09-02 16:55 bernlohr * cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.10): Update gain variation and voltage variation to agreed value, specific to NectarCam. 2019-09-02 16:39 bernlohr * cfg/CTA/: CTA-PROD4-LST-prototype.cfg (1.8), CTA-PROD4-LST.cfg (1.21): Changed discriminator_amplitude parameter and, with corresponding scaling factor, also asum_clipping and asum_threshold. 2019-08-29 17:37 bernlohr * cfg/common/zodiacal.dat (1.1, prod6beta1, prod5): Adding the zodiacal light distribution based on Leinert into a rpolator/rpolist enabled 2-D table. Units of data need to be clarified. 2019-08-22 18:21 bernlohr * common/sim_imaging.c (1.96): The 'behind lens' condition in refract_in_fresnel_lens() is not applicable. 2019-08-22 17:53 bernlohr * common/sim_imaging.c (1.95): Fix typo in debugging-only code. 2019-08-22 16:31 bernlohr * common/mc_aux.h (1.181), common/sim_config.c (1.184), common/sim_telarray.c (1.155), doc_src/sim_hessarray.tex (1.100): Start the default preprocessor from the same path as sim_telarray. This works also without the 'make install' step. 2019-08-21 21:34 bernlohr * hess/Makefile.hess (1.233): For implied or explicit 'make depend' we need another define. 2019-08-21 21:32 bernlohr * cfg/: CTA/CTA-PROD1S.cfg (1.2), CTA/CTA-ULTRA1-large-hQE.cfg (1.2), CTA/CTA-ULTRA1-large-uQE.cfg (1.2), CTA/CTA-ULTRA1-medium-hQE.cfg (1.2), CTA/CTA-ULTRA1.cfg (1.5), CTA/CTA-ULTRA2.cfg (1.5), CTA/CTA-ULTRA3.cfg (1.2), CTA/CTA-ULTRA3i-large.cfg (1.3), CTA/CTA-ULTRA3i-medium.cfg (1.3), CTA/CTA-ULTRA3i-small.cfg (1.3), CTA/CTA-ULTRA3i.cfg (1.3), CTA/CTA-ULTRA6-SST-ASTRI2.cfg (1.2), hess/hess-ct3.cfg (1.2), hess/hess-phase1.cfg (1.2), hess/hess.cfg (1.13), hess2/hess-phase2.cfg (1.7, phase2d3), hess2/hess2_common.cfg (1.3, phase2d3), hess2/hess2sector.cfg (1.8, phase2d3), hess2/hess2smartpixel.cfg (1.6, phase2d3), hess2/largetel.cfg (1.4, phase2d3), hess3/hess3.cfg (1.4) (utags: prod5, prod6beta1): Convert all remaining old configuration file with double-quote include file specification, with or without partial paths, to '<>' style, without paths, which is searched for in configured paths. 2019-08-07 17:34 bernlohr * sim_hessarray.dox (1.15): Bump date in generated source code documentation. 2019-08-07 17:32 bernlohr * common/mc_aux.h (1.180), common/sim_config.c (1.183), common/sim_signal.c (1.100), common/sim_telarray.c (1.154), doc_src/sim_hessarray.tex (1.99), hess/hess_defaults.h (1.131): Enable storing of the amplitude resulting from signal p.e., together with the arrival time. 2019-08-07 14:37 bernlohr * common/sim_telarray.c (1.153): Drop READ_ASCII_PE_LIST optional feature. 2019-08-06 15:33 bernlohr * common/mc_aux.h (1.179), common/sim_config.c (1.182), common/sim_signal.c (1.99), common/sim_telarray.c (1.152), doc_src/sim_hessarray.tex (1.98), hess/hess_defaults.h (1.130), hess/sim_conv2hess.c (1.121): Provide more information for extended data blocks, in particular the TelEvent block with an absolute time (w.r.t. CORSIKA event) of when the readout in each telescope starts. A new parameter can be used to scramble the MC-true information contained in the zero-point of that time information (which is most useful to correlate MC true p.e. lists directly with the resultin pulse traces). 2019-08-02 18:25 bernlohr * cfg/hess2/hess-phase2c.cfg (1.9): Get rid of semicolons that resulted in a warning (although there was no problem). 2019-08-02 16:26 bernlohr * hess/sim_conv2hess.c (1.120): Was releasing the wrong copy of the history lines. 2019-08-02 14:36 bernlohr * hess/Makefile.hess (1.232): Build LightEmission package also with 'install' target (even though there is no real installation step done there). 2019-08-02 14:34 bernlohr * LightEmission/Makefile (1.14): Add '-p' to mkdir: better for parallel builds. 2019-07-31 16:32 bernlohr * common/mc_aux.h (1.178), common/sim_config.c (1.181), common/sim_imaging.c (1.94), doc_src/sim_hessarray.tex (1.97), doc_src/fig/rpol_schemes.pdf (1.2, prod6beta1, prod5), doc_src/fig_src/rpol_schemes.gpl (1.2, prod6beta1, prod5), hess/hess_defaults.h (1.129): Add position-dependent mirror degradation. 2019-07-31 14:49 bernlohr * common/: mc_aux.h (1.177), sim_imaging.c (1.93): Alternate calculation of polygon center preferred if resulting in smaller fiducial radius. Flush stdout before output to stderr in remaining cases. 2019-07-24 15:09 bernlohr * util/corsika_autoinputs.cc (1.23): Add a '--corsika-version' option to steer the preprocessing without actually providing such a corsika binary to run. 2019-07-24 15:06 bernlohr * corsika/README (1.93): README file size. 2019-07-24 15:01 bernlohr * corsika/: README (1.92), README.tex (1.82): Update documentation for version 1.60. 2019-07-24 14:25 bernlohr * corsika/: atmo.c (1.41), iact.c (1.122), iact_full5.c (1.124): Update version text. 2019-07-23 18:54 bernlohr * common/mc_aux.h (1.176), common/sim_config.c (1.180), common/sim_telarray.c (1.151), corsika/atmo.c (1.40), corsika/atmo.h (1.12), hess/sim_conv2hess.c (1.119): Improve consistency of atmospheric profile handling in CORSIKA and sim_telarray. 2019-07-22 15:19 bernlohr * common/sim_telarray.c (1.150), corsika/atmo.c (1.39), hess/sim_conv2hess.c (1.118), util/extract_corsika_multi.c (1.5, prod5), util/extract_corsika_tel.c (1.6), util/multipipe_corsika.c (1.22, prod5): Pass atmospheric profile data through pipeline tools and sim_telarray. 2019-07-22 15:18 bernlohr * doc_src/sim_hessarray.tex (1.96): Fix wrong units. 2019-07-19 17:42 bernlohr * common/mc_aux.h (1.175), common/sim_config.c (1.179), common/sim_imaging.c (1.92), corsika/iact_full5.c (1.123), doc_src/sim_hessarray.tex (1.95), hess/hess_defaults.h (1.128): A few fixes and more checks for Fresnel lens optics. Make lens index of refraction configurable. Add a number of fflush(NULL) calls before writing to stderr. Minor changes to syntax checking of camera configuration files may end the processing at the first syntax problem rather than going through the whole file anyway. Might revert that particular aspect later-on. 2019-07-19 17:35 bernlohr * hess/Makefile.hess (1.231): Fix a mistake in using the filter-out function. 2019-07-19 15:12 bernlohr * corsika/: iact.c (1.121), iact_full5.c (1.122): Problem in writing atmospheric profile got resolved. 2019-07-19 14:21 bernlohr * LightEmission/pixled.cc (1.6, prod5): More permissive for pre-summation pixel group syntax. 2019-07-18 19:02 bernlohr * LightEmission/Makefile (1.13): Need to link with mc_atmprof.c now also in the LightEmission package. 2019-07-13 20:28 bernlohr * common/sim_telarray.c (1.149): Start support for the new data block type with atmospheric profiles. 2019-07-13 20:26 bernlohr * corsika/: Makefile.dist (1.78), README (1.91), README.tex (1.81), atmo.c (1.38), atmo.h (1.11), iact.c (1.120), iact_full5.c (1.121), sim_skeleton.c (1.10, prod5): For version 1.60 we write a new type of data block that includes the data table of the given atmospheric profile. 2019-07-13 17:49 bernlohr * corsika/gd_image.c (1.8, prod6beta1, prod5): Need a temporary copy of a string that is not actually used a s constant. 2019-07-12 17:35 bernlohr * corsika/corsika.dox (1.35): Prepare for version 1.60. 2019-07-12 17:33 bernlohr * corsika/Makefile.dist (1.77): Prepare for version 1.60 and including mc_atmprof. 2019-07-12 17:32 bernlohr * hess/Makefile.hess (1.230): Generating automatic dependencies needs a few more tweaks. 2019-07-12 17:30 bernlohr * corsika/remove_extension.c (1.4, prod6beta1, prod5): Add a bit of doxygen comments and make it C++ compiler compatible. 2019-07-12 17:24 bernlohr * corsika/: gd_image.c (1.7), gd_image.h (1.3, prod6beta1, prod5): Text strings can be 'const char *' even though deeper in gd the const needs to be casted away. 2019-07-11 16:07 bernlohr * util/rpolist.c (1.9): Fix a line not compatible with compilation by C++ compiler. 2019-07-11 16:04 bernlohr * common/wrgif.c (1.4, prod6beta1, prod5): Convert remaining K&R style, now also compiling with C++ compiler. 2019-05-29 15:22 bernlohr * doc_src/sim_hessarray.tex (1.94): Include Fresnel lens optics in documentation. 2019-05-28 16:10 bernlohr * common/: mc_aux.h (1.174), sim_imaging.c (1.91): Working but still simplified Fresnel lens implementation. 2019-05-27 18:38 bernlohr * common/sim_imaging.c (1.90): Some progress for Fresnel lens but still incomplete. 2019-05-27 14:06 bernlohr * common/mc_aux.h (1.173), common/sim_config.c (1.178), common/sim_imaging.c (1.89), common/sim_telarray.c (1.148), doc_src/sim_hessarray.tex (1.93), hess/hess_defaults.h (1.127): Add framework for Fresnel lens optics implementation as mirror class 3. 2019-05-27 12:53 bernlohr * common/rpolator.c (1.19), corsika/fake_corsika.c (1.5, prod6beta1, prod5), corsika/iact.c (1.119), corsika/iact_full5.c (1.120): Fix new warnings generated with gcc 9.1 and clang 8. 2019-05-13 17:37 bernlohr * cfg/CTA/CTA-PROD4-FlashCam-camera.cfg (1.4): Updating a few FlashCam parameters that did not yet match the real instrument. 2019-04-24 17:38 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.20): LST telescope transmission value following small change in geometrical mirror area from detailed ray-tracing. 2019-04-24 17:07 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.7): Updated mirror list in particular for LST1 prototype. 2019-04-24 16:08 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.19), cfg/CTA/mirror_CTA-N-LST1_v2019-03-31.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.229): With updated LST1 mirror list, now used by default for all LSTs. Using bigger camera body value by default. 2019-04-11 18:28 bernlohr * common/: mc_aux.h (1.172), sim_imaging.c (1.88): Easier way to set up transformations with axes offsets than used in tel_newdir so far. 2019-04-11 18:25 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-optics.cfg (1.8, prod6beta1, prod5): What is the displacement of the elevation axis in ASTRI? 2019-04-09 17:48 bernlohr * common/rpolator.c (1.18): Add NOCLIP option as an alternative to CLIP=0. 2019-04-09 17:47 bernlohr * doc_src/sim_hessarray.tex (1.92): Add documentation of rpolator options attached to file name. 2019-04-09 17:03 bernlohr * util/rpolist.c (1.8): Make sure '-s' option takes effect. 2019-04-09 16:50 bernlohr * common/rpolator.c (1.17): Allow appending rpolator options to the table file name after '#rpol:'. 2019-04-05 16:57 bernlohr * cfg/common/skycalc_defaults.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_fullmoon.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_halfmoon.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_moon160.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_10deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_20deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_30deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_40deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_45deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_50deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_55deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_60deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_65deg.dat (1.1, prod6beta1, prod5), cfg/common/skycalc_nomoon_70deg.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.228): Export also various NSB spectra calculated with the ESO Paranal Advanced Sky Model. 2019-04-05 14:57 bernlohr * common/sim_signal.c (1.98): Extend the maximum size of the single-p.e. table even more and warn when that gets exceeded. 2019-04-05 14:55 bernlohr * param_comp/mk_param_evo.sh (1.15): Fix wrong comment character. 2019-04-05 14:54 bernlohr * testeff.c (1.43): Add option to change the NSB spectrum. 2019-03-28 17:05 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.10): Adjust SCT camera parameters according to discussion. 2019-03-27 17:36 bernlohr * common/sim_telarray.c (1.147): Better diagnostics if laser calibration events cannot be simulated because there are too many p.e.s produced. Get rid of optical efficiency for expected number of those p.e.s. 2019-03-22 13:45 bernlohr * common/: sim_absorb.c (1.30), sim_config.c (1.177): Similar for filter as for reflectivity. In both cases we want to use the requested interpolation scheme rather than falling back to linear interpolation (if the table asked for something else). 2019-03-22 13:08 bernlohr * common/: rpolator.c (1.16), sim_config.c (1.176), sim_telarray.c (1.146): ZXMAX option is explicitely needed when loading 2D reflection tables. 2019-03-21 19:38 bernlohr * common/mc_aux.h (1.171), common/sim_config.c (1.175), common/sim_imaging.c (1.87), hess/hess_defaults.h (1.126), hess/sim_conv2hess.c (1.117): Add NSB sky map feature for easier to use non-uniform NSB, rather than addressing pixels individually. Also fix the starlight contribution to NSB that got broken a while ago. 2019-03-21 19:35 bernlohr * hess/rec_tools.c (1.8, prod6beta1, prod5): Sync comments with hessio version. 2019-03-21 19:34 bernlohr * hess/Makefile.hess (1.227): Build the norm_spe program by default. 2019-03-21 19:33 bernlohr * util/norm_spe.cc (1.5): Add more 'no-action' options. 2019-03-21 16:46 bernlohr * common/sim_imaging.c (1.86): Fix bug in transform_off() function: wrong offsets were applied in backward transformation. 2019-03-15 17:51 bernlohr * common/sim_config.c (1.174): The repolator variant of reflectivity tables did not properly handle a secondary mirror value of "same" (like the pre-rpolator variant did). 2019-03-15 17:42 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.9): Fix recent typo. 2019-03-15 16:53 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.8), cfg/CTA/sct_primary_segments.dat (1.1, prod5), cfg/CTA/sct_secondary_segments.dat (1.1, prod5), hess/Makefile.hess (1.226): Add segmentation for SCT primary and secondary reflectors. 2019-03-15 16:52 bernlohr * doc_src/sim_hessarray.tex (1.91): Improved description of dual mirror segmentation. 2019-03-14 15:50 bernlohr * cfg/hess2/hess-phase2d.cfg (1.7): Avoid confusion of THRESHOLD_5X as defined in basic FlashCam config and in FlashCam on HESS CT5. 2019-03-14 15:47 bernlohr * param_comp/mk_param_evo.sh (1.14): Insert a few '\clearpage' commands into the LaTeX files. 2019-03-08 18:54 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.6): Wrong comment character. 2019-03-08 18:41 bernlohr * Cameras/showcam.gpl.sh (1.17), cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.5), cfg/CTA/CTA-PROD4-LST.cfg (1.18), cfg/CTA/camera_CTA-LST_analogsum21_v2019-03-01.dat (1.1), hess/Makefile.hess (1.225): Try a fixed version of the LST camera configuration file with new pixel ordering. 2019-03-08 16:01 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.4): Report prototype optics configuration version. 2019-03-08 15:57 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.3), cfg/CTA/mirror_CTA-LST-flen_grouped.dat (1.2, prod6beta1, prod5), cfg/CTA/mirror_CTA-N-LST1_v2018-09-08.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.224): Use mirror list with individual focal lengths for LST1 prototype. 2019-03-08 15:56 bernlohr * doc_src/sim_hessarray.tex (1.90): Date of last revision updated. 2019-03-07 16:19 bernlohr * sim_hessarray.dox (1.14): Doxygen version/date updated. 2019-03-07 15:34 bernlohr * cfg/hess2/hess-phase2d.cfg (1.6): Threshold tuning for FC on CT5. 2019-03-07 14:05 bernlohr * param_comp/: mk_param_comp.sh (1.6), param_comp_hess.sh (1.2): For HESS-2 phase simulations also include parameters of small telescopes. 2019-03-04 16:27 bernlohr * cfg/hess2/hess-phase2d.cfg (1.5): Iterating thresholds for manageable NSB random trigger rates. 2019-03-01 17:47 bernlohr * doc_src/sim_hessarray.tex (1.89): Describe the new FAKE_TRIGGER and FAKE_DELAY parameters. 2019-03-01 16:52 bernlohr * hess/Makefile.hess (1.223): Include all known configuration files in deriving the config version date/time string. 2019-03-01 16:38 bernlohr * cfg/CTA/spe_FlashCam_7dynode_v0a.dat (1.3, prod6beta1, prod5), cfg/CTA/spe_FlashCam_8dynode_v0a.dat (1.3, prod6beta1, prod5), util/norm_spe.cc (1.4): Add interpolated support points rather than renormalizing the single-p.e. distribution as the remaining error in generated amplitudes (now below 1%) is a result of the amplitudes generator. 2019-03-01 15:52 bernlohr * common/: mc_aux.h (1.170), sim_config.c (1.173), sim_signal.c (1.97): Actual mean single-p.e. normalization is used to correct reported pedestals, calibration factors and pixel currents, even though the mean amplitude may still differ from expectations if the single-p.e. table is not properly normalized or the generated distribution differs from expectations. 2019-02-28 19:02 bernlohr * p4eff.sh (1.8), p4eff_all.sh (1.5): Tweaks for producing the same type of efficiency files also for a selection of HESS telescope configurations. 2019-02-28 19:01 bernlohr * generic_run.sh (1.42): [no log message] 2019-02-28 18:59 bernlohr * hess/hess_defaults.h (1.125), common/mc_aux.h (1.169), common/sim_config.c (1.172), common/sim_signal.c (1.96), common/sim_telarray.c (1.145): Add an option to use an idealized ("fake") trigger instead of one derived from the electronics signals. 2019-02-28 18:57 bernlohr * cfg/hess2/hess-phase2d.cfg (1.4): Updates for FlashCam on CT5 configuration. 2019-02-26 15:55 bernlohr * param_comp/: mk_param_comp.sh (1.5), param_comp.sh (1.6), param_comp_hess.sh (1.1): Optionally generate a comparison of HESS simulation parameters as well. 2019-02-22 18:42 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.12): Random focal length is just half of the valid assumed. 2019-02-22 17:21 bernlohr * cfg/CTA/ref_200_1100_190211a.dat (1.2, prod6beta1, prod5): Sorting table. 2019-02-22 15:10 bernlohr * hess/Makefile.hess (1.222): Include new lightcone efficiency, new single-p.e. response and new pulse shapes (both with 7 and with 8 dynodes) for FlashCam. 2019-02-22 15:08 bernlohr * util/norm_spe.cc (1.3): Respect comments in the input file and include the applied scaling to the additional comments written to the output. 2019-02-21 18:04 bernlohr * cfg/CTA/: CTA-PROD4-FlashCam-camera.cfg (1.3), spe_FlashCam_7dynode_v0a.dat (1.2), spe_FlashCam_8dynode_v0a.dat (1.2): Fix FlashCam configuration and normalize single-p.e. response. 2019-02-21 17:35 bernlohr * cfg/CTA/: CTA-MST_lightguide_FC_weighted_average.dat (1.1, prod6beta1, prod5), CTA-PROD4-FlashCam-camera.cfg (1.2), camera_CTA-MST-FlashCam_patch3_digitalsum21_neweff2.dat (1.1, prod6beta1, prod5), camera_CTA-MST-FlashCam_patch3_digitalsum9_neweff2.dat (1.1, prod6beta1, prod5), pulse_FlashCam_7dynode_v2a.dat (1.1, prod6beta1, prod5), pulse_FlashCam_8dynode_v2a.dat (1.1, prod6beta1, prod5), spe_FlashCam_7dynode_v0a.dat (1.1), spe_FlashCam_8dynode_v0a.dat (1.1): Configuration update for FlashCam. 2019-02-20 16:30 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.17): Update the optics version string since the reflectivity curve got updated. 2019-02-19 21:54 bernlohr * corsika/iact_full5.c (1.119): With SHOW_VERTICAL_STRUCT build add a column for integral light distribution and extend the range to 10 000 m. iact.c is just regenerated, no changes. 2019-02-18 15:41 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.16), cfg/CTA/ref_200_1100_190211a.dat (1.1), hess/Makefile.hess (1.221): Updated LST reflectivity curve. 2019-02-18 15:41 bernlohr * switch_sim.sh (1.2, prod6beta1, prod5): Check that directory for switch actually exists. 2019-02-15 15:42 bernlohr * corsika/iact.h (1.12, prod5): Underscore was missing in a function prototype (not relevant as the function is only called from within CORSIKA). 2019-02-09 21:45 bernlohr * doc_src/sim_hessarray.tex (1.88): More complete description of value in Pixel line of camera configuration file. 2019-02-05 15:37 bernlohr * Mirrors/plot_mirrors.c (1.9, prod5): The average radius of mirror edges was mis-interpreted; it was the average of all edges of all mirror facets and not the edge of the dish. Stop writing these number to avoid such mis-interpretation. 2019-02-05 13:11 bernlohr * cfg/CTA/: mirror_CTA-100_1.20-72-0.04.dat (1.2), mirror_CTA-100_1.20-80-0.04.dat (1.2), mirror_CTA-100_1.20-84-0.02.dat (1.3), mirror_CTA-100_1.20-84-0.04.dat (1.2), mirror_CTA-100_1.20-86-0.02.dat (1.2), mirror_CTA-100_1.20-86-0.04.dat (1.2), mirror_CTA-100_1.20-88-0.02.dat (1.3), mirror_CTA-100_1.20-88-0.04.dat (1.2), mirror_CTA-100_1.20-90-0.02.dat (1.2), mirror_CTA-100_1.20-90-0.04.dat (1.2), mirror_DC4m_78cm_s2cm_f5.600_nocent.dat (1.2) (utags: prod5, prod6beta1): Remove comment about average edge radius which looks like an error. 2019-02-04 16:04 bernlohr * testeff.c (1.42): And yet another bit of pre-rpolator code gone. 2019-02-04 15:08 bernlohr * common/: mc_aux.h (1.168), sim_absorb.c (1.29), sim_config.c (1.171), sim_telarray.c (1.144): Get rid of last bits of pre-rpolator compatibility. 2019-02-04 14:42 bernlohr * testeff.c (1.41), LightEmission/IactLightEmission.hh (1.13), common/sim_absorb.c (1.28), common/sim_imaging.c (1.85), common/sim_telarray.c (1.143): Continuing with removing pre-rpolator variants. 2019-02-04 13:48 bernlohr * LightEmission/IactLightEmission.cc (1.9), LightEmission/Makefile (1.12), common/absorb.h (1.14, prod5), common/sim_absorb.c (1.27), common/sim_config.c (1.170): Start removing non-rpolator-using code paths. 2019-02-04 13:44 bernlohr * corsika/: README (1.90), README.tex (1.80): Sync ReadMe file with current version. 2019-02-01 16:12 bernlohr * corsika/: Copyright (1.12), Makefile.dist (1.76), README (1.89), README.tex (1.79), atmo.c (1.37), atmo.h (1.10), corsika.dox (1.34), iact.c (1.118), iact_full5.c (1.118): With version 1.59 dropping all atmopsheric profile interpolation without rpolator, without using cubic splines in the initial interpolation and without fast interpolation later-on. 2019-01-31 11:10 bernlohr * cfg/hess2/hess-phase2c.cfg (1.8): For the HESS phase2c/d simulations you can not only enforce a single telescope to be any of CT1 to CT4 but you can also enforce this for the fifth telescopes. 2019-01-30 15:13 bernlohr * cfg/hess2/hess-phase2d.cfg (1.3): More FlashCam on CT5 tuning. 2019-01-29 18:26 bernlohr * p4eff.sh (1.7), Cameras/fov.cc (1.9), Cameras/showcam.gpl.sh (1.16): Fix pixel FoV calculation in fov.cc. Use proper effective flen wit HESS CT5. 2019-01-29 18:24 bernlohr * generic_run.sh (1.41): Include a 'phase2d' configuration name (HESS2 with FlashCam on CT5). 2019-01-29 18:23 bernlohr * cfg/CTA/camera_CTA-MST-FlashCam_patch3_digitalsum21_neweff.dat (1.1, prod6beta1, prod5), cfg/hess2/hess-phase2d.cfg (1.2), hess/Makefile.hess (1.220): Add FlashCam camera config with 21-pixel trigger region and new cone efficiency. Update HESS2-FC configuration to use that as an option. 2019-01-29 18:20 bernlohr * corsika/atmo.c (1.36): Fix compatibility with gcc 4.8.5. 2019-01-25 16:19 bernlohr * corsika/README (1.88): Prepare of release 1.58 of the IACT/atmo package. 2019-01-25 16:11 bernlohr * corsika/: Makefile.dist (1.75), README (1.87), README.tex (1.78), corsika.dox (1.33), iact.c (1.117), iact_full5.c (1.117): Prepare of release 1.58 of the IACT/atmo package. 2019-01-25 16:11 bernlohr * corsika/: atmo.c (1.35), atmo.h (1.9): By default now use the direct fast interpolation for density, thickness and index of refraction but no cubic splines on top of that. 2019-01-21 16:47 bernlohr * rx.cc (1.5): Add copyright notice. 2019-01-21 16:18 bernlohr * corsika/fake_corsika.c (1.4): To be able to compile fake_corsika with a C++ compiler, we need the same 'extern C' interface definitions as in the other parts. 2019-01-20 16:00 bernlohr * corsika/: README (1.86), README.tex (1.77): Small changes to docu. 2019-01-20 15:59 bernlohr * corsika/atmo.c (1.34): Need to use preprocessor define to decide if rpolator gets included or compiled separately. 2019-01-18 16:05 bernlohr * hess/Makefile.hess (1.219): Special flag for compiling atmo.c without including rpolator.c. 2019-01-18 16:04 bernlohr * common/rpolator.c (1.15): Need to allocate one more step for cubic splines, even though not used later-on. 2019-01-18 16:01 bernlohr * corsika/atmo.c (1.33): Making sure the different compile-time options properly work together and tweaking the initialization to improve the accuracy in the height-to-thickness-to-height round trip (heighx(thickx(h))-h). 2019-01-17 18:37 bernlohr * common/rpolator.c (1.14): One array used in cspline derivation apparently was too short by 1. 2019-01-15 17:34 bernlohr * common/rpolator.h (1.11, prod6beta1, prod5): Add prototype for good old rpol(). 2019-01-15 17:30 bernlohr * corsika/atmo.c (1.32): As to be expected, incuding rpolator.c in atmo.c results in a dilemma. 2019-01-15 17:18 bernlohr * hess/Makefile.hess (1.218): And one more, fixing the previous fix. 2019-01-15 17:05 bernlohr * hess/Makefile.hess (1.217): Another fix related to the ancient hess.cfg-example file. 2019-01-15 17:00 bernlohr * hess/Makefile.hess (1.216): The hess.cfg-example did not get moved into cfg/hess. 2019-01-15 16:56 bernlohr * cfg/common/atmprof9.dat (1.3, prod6beta1, prod5): Mention that density column was fixed. It was wrong by an order of magnitude since its creation. 2019-01-15 16:44 bernlohr * corsika/: README (1.85), README.tex (1.76): Mention additions to atmo.c. 2019-01-15 15:59 bernlohr * corsika/Makefile.dist (1.74): Export with rpolator code. 2019-01-15 15:55 bernlohr * corsika/atmo.c (1.31): All combinations for refraction correction (old/new, with/without rpolator, with/without csplines, slow/fast interpolation) now working. 2019-01-12 02:09 bernlohr * common/: rpolator.c (1.13), rpolator.h (1.10): Adapt licence of rpolator code to match the less strict LGPL 2.1+ used in the IACT/atmo package (or the hessio library), for consistency. 2019-01-11 18:06 bernlohr * corsika/atmo.c (1.30): First fix in refraction fast interpolation. 2019-01-11 17:49 bernlohr * corsika/atmo.c (1.29): Add fast interpolation option for atmospheric refraction correction. 2019-01-11 14:28 bernlohr * corsika/atmo.c (1.28): Cubic spline interpolation implemented. 2019-01-10 15:45 bernlohr * corsika/atmo.c (1.27): Add a few comments on compile-time options. 2019-01-10 15:43 bernlohr * common/sim_config.c (1.169): Main configuration file can also be found in the defined include paths, if the name is given without any path component. 2019-01-10 15:42 bernlohr * cfg/hess2/hess-phase2c.cfg (1.7): Fix two typos. 2019-01-07 18:06 bernlohr * cfg/hess2/hess-phase2d.cfg (1.1), hess/Makefile.hess (1.215): Completing move of HESS config files into cfg sub-directories. 2019-01-07 17:34 bernlohr * cfg/hess2/hess-phase2c.cfg (1.6), hess/Makefile.hess (1.214): Update HESS configuration with FlashCam on CT5. 2019-01-07 17:31 bernlohr * cfg/CTA/: CTA-PROD4-FlashCam-camera.cfg (1.1), CTA-PROD4-MST-FlashCam.cfg (1.12): Split off the part for the camera itself, for better re-use with different telescopes. 2019-01-07 17:25 bernlohr * corsika/: GNUmakefile (1.37), Makefile.dist (1.73), README (1.84), README.tex (1.75), atmo.c (1.26), atmo.h (1.8), corsika.dox (1.32), fake_corsika.c (1.3), iact.c (1.116), iact.h (1.11), iact_full5.c (1.116), sim_skeleton.c (1.9): Mainly version number and documentation related changes. Exporting a few more files. 2019-01-05 13:24 bernlohr * corsika/atmo.c (1.25): First part of using the rpolator for atmospheric profiles, used only for table reading so far. Checking for consistency of the table read. Trying alternate starting levels between the five EGS layers for improving the fit (this may result in slightly different fit coefficients compared to previous versions). 2019-01-05 13:12 bernlohr * cfg/common/atmprof9.dat (1.2): Fix wrong density column in antarctic profile. 2018-12-21 16:25 bernlohr * cfg/hess2/hess-phase2c.cfg (1.5): Updated phase2c parameters with values from Justus. 2018-12-14 14:55 bernlohr * common/sim_telarray.c (1.142): Report a few more compile-time defines (like revised NSB handling, for example) and an option to report also prepared-for but not defined macros. 2018-12-14 14:53 bernlohr * common/mc_aux.h (1.167): Make the revised NSB handling the default. 2018-12-14 14:52 bernlohr * cfg/CTA/gct_primary_segments_poly.dat (1.2, prod6beta1, prod5): Add commented-out alternatives for polygon-shaped segments, only differing outside the primary mirror radius, with no impact on the area actually getting used. 2018-12-04 14:49 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.26, prod6beta1, prod5): Add reminder of changing nsb_gain_drop_scale with next revision. 2018-12-03 16:46 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.25): Fall-back to 'ppmm' shaping also excluding the _PZ variants. 2018-12-02 23:37 bernlohr * common/: mc_aux.h (1.166), sim_config.c (1.168), sim_signal.c (1.95): Rewriting parts of the digital sum trigger shaping code and uncovering the problem of DC coupled signals. Interleaved FADCs on the same channel should also work with that now. 2018-12-02 23:35 bernlohr * hess/hess_defaults.h (1.124): Changing compile time defaults for fadc_dev_pedestal (not really applicable to any HESS or CTA telescope model) and dsum_shaping_renormalize (used in prod3 only with shaping kernels not affected). 2018-12-02 23:29 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.24): dsum_shaping_renormalize should have been zero for actually doing the shaping in integer. Compensating for the larger shaped amplitude with 'ppmm' shaping by reducing the prescaling factor. 2018-11-30 23:54 bernlohr * common/mc_aux.h (1.165), common/rpolator.c (1.12), common/rpolator.h (1.9), common/sim_config.c (1.167), common/sim_signal.c (1.94), hess/sim_conv2hess.c (1.116), util/tree.c (1.6, prod5): Revised handling of NSB p.e. pulses the same way as signal p.e., for now as a compile-time option. 2018-11-27 17:05 bernlohr * common/mc_aux.h (1.164): Easier overriding of MAX_BUNCHES etc. defaults also at compile-time. 2018-11-27 16:48 bernlohr * common/sim_telarray.c (1.141): Apart from MAX_PHOTOELECTRONS allow also overriding MAX_PIXEL_PHOTOELECTRONS at run-time. 2018-11-27 16:25 bernlohr * hess/hess_defaults.h (1.123): Shift comment such that doxygen properly associates it with the struct following. 2018-11-27 16:23 bernlohr * common/sim_telarray.c (1.140): Allow overriding of MAX_PHOTOELECTRONS at run-time with environment variable. 2018-11-25 13:28 bernlohr * common/rndm2.c (1.6), common/sim_signal.c (1.93), util/tree.h (1.7, prod6beta1, prod5): Get rid of even more warnings and errors in more language standard/compiler combinations. 2018-11-25 13:01 bernlohr * common/rpolator.c (1.11), common/sim_config.c (1.166), common/sim_imaging.c (1.84), common/sim_signal.c (1.92), hess/Makefile.hess (1.213), hess/hess_defaults.h (1.122), hess/sim_conv2hess.c (1.115), util/pfp.c (1.12): Get rid of warnings when compiling with modern C/C++ language standards and error messages when compiling C code with C++ compilers, including GCC 8.2 and clang 7.0. 2018-11-22 19:26 bernlohr * common/rpolator.c (1.10), common/rpolator.h (1.8), doc_src/sim_hessarray.tex (1.87), doc_src/fig/rpol_schemes.pdf (1.1), doc_src/fig_src/rpol_schemes.dat (1.1, prod6beta1, prod5), doc_src/fig_src/rpol_schemes.gpl (1.1), util/rpolist.c (1.7): Implement cubic spline interpolation and re-implement the '2nd order' scheme 2 as piece-wise polynomial (2nd order in the intervals near the boundaries, otherwise actually 3rd order). Add documentation for it. 2018-11-19 13:47 bernlohr * doc_src/sim_hessarray.tex (1.86): Document new configuration parameter for separating Cherenkov and fluorescence light. 2018-11-19 13:43 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.15), transmission_lst_window_No7-10_ave.dat (1.2, prod6beta1, prod5): Fix incorrect LST filter transmission file name, and fix a problem with lines ending by carriage return in the actual transmission file. 2018-11-19 13:41 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.16): With 7mm camera pixels on GCT now fully configured. 2018-11-13 17:55 bernlohr * common/mc_aux.h (1.163), common/sim_config.c (1.165), common/sim_telarray.c (1.139), hess/hess_defaults.h (1.121): Add option to select between two different classes of light origin, e.g. Cherenkov or fluorescence, either based on the sign of the bunch size or the zero/non-zero wavelength. 2018-11-13 17:53 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.23), CTA-PROD4-SST-ASTRI+CHEC-S.cfg (1.4, prod6beta1, prod5), CTA-PROD4-SST-ASTRI-camera.cfg (1.12, prod6beta1, prod5), CTA-PROD4-SST-ASTRI.cfg (1.21, prod6beta1, prod5), CTA-PROD4-SST-CHEC-S-camera.cfg (1.15), CTA-PROD4-SST-GCT.cfg (1.17, prod6beta1, prod5): Thresholds with moon light, fewer photons and p.e. required for ultimate low threshold. 2018-11-07 18:36 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI-camera.cfg (1.11), CTA-PROD4-SST-CHEC-S-camera.cfg (1.14): Update "safe threshold" settings for ASTRI and CHEC-S camera after fix. 2018-11-06 22:17 bernlohr * common/sim_signal.c (1.91): More debugging output and more problem fixing with analog channel offsets due to NSB in case of super-pixel sums. 2018-11-05 17:13 bernlohr * common/: mc_aux.h (1.162), sim_config.c (1.164), sim_signal.c (1.90): Fix pulse area to be subtracted on analog (discriminator) channel with AC coupling. 2018-11-05 17:12 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI-camera.cfg (1.10), CTA-PROD4-SST-CHEC-S-camera.cfg (1.13): Fix off-axis dependence of NSB pixel rate for cameras on GCT and ASTRI. 2018-10-29 19:22 bernlohr * hess/Makefile.hess (1.212): Automatically create a file cfg/ConfigVersion.txt and update it when the configuration directories got updated. 2018-10-29 18:46 bernlohr * hess/Makefile.hess (1.211): Also export new multipipe config file. 2018-10-29 18:42 bernlohr * multi/: multi_cta-trg-test-prod4-SST1_B1230.cfg (1.3), multi_cta-trg-test-prod4-SST1_B1235.cfg (1.1) (utags: prod5, prod6beta1): Add corresponding config file for B-SST-1235. Fix power-law index (must be in extra_config rather than extra_defs to become effective). 2018-10-27 13:12 bernlohr * multi/multi_cta-trg-test-prod4-SST1_B1230.cfg (1.2): Include high-NSB evaluations for B-SST-1230. 2018-10-27 12:25 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.22), CTA-PROD4-SST-ASTRI+CHEC-S.cfg (1.3), CTA-PROD4-SST-ASTRI-camera.cfg (1.9), CTA-PROD4-SST-CHEC-S-camera.cfg (1.12), CTA-PROD4-SST-GCT.cfg (1.16): Including NSB pixel rates and thresholds for partial and full moon illumination. Min_photons and min_photoelectrons also lowered a bit for GCT and ASTRI, to be on the safe side, even though the old values were still OK. 2018-10-26 17:39 bernlohr * multi/: multi_cta-trg-test-prod4-SST1-B1230.cfg (1.2), multi_cta-trg-test-prod4-SST1_B1230.cfg (1.1): Typo in filename. 2018-10-26 17:12 bernlohr * hess/Makefile.hess (1.210), hess/hess_defaults.h (1.120), multi/multi_cta-trg-test-prod4-SST1-B1230.cfg (1.1): Add a multipipe config file to test requirement B-SST-1230 which exposed a too small range for the SAVE_PHOTONS parameter when STORE_PIX_PHOTONS is enabled. Adding a real check for that. 2018-10-25 19:48 bernlohr * cfg/CTA/camera_CHEC-S_uniqueSP.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.209): Add and export new CHEC-S camera definition file. 2018-10-23 15:06 bernlohr * LightEmission/Makefile (1.11), hess/Makefile.hess (1.208): Match up files exported in stand-alone LightEmission package and as part of sim_telarray. 2018-10-23 15:04 bernlohr * Cameras/showcam.gpl.sh (1.15): Show, for comparison, also GCT with 7mm pixels, and CHEC-S with prior camera config files in addition to temporary x9r files. 2018-10-22 12:37 bernlohr * hess/Makefile.hess (1.207): Also export multipipe config file for 7mm CHEC-S on ASTRI. 2018-10-22 12:36 bernlohr * multi/: multi_cta-prod4-sst-astri+chec-s-7mm.cfg (1.1), multi_cta-prod4-sst.cfg (1.3) (utags: prod5, prod6beta1): Include the variant of a CHEC-S camera with 7 mm pixels on ASTRI optics. 2018-10-22 11:46 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.11): Fine-tuned CHEC-S thresholds for x9r variant. 2018-10-22 00:41 bernlohr * hess/Makefile.hess (1.206): Also export latest CHEC-S camera definition files. 2018-10-22 00:40 bernlohr * LightEmission/pixled.cc (1.5): More tests of camera configs but still more to come. 2018-10-22 00:40 bernlohr * Cameras/modular_camera.cc (1.12): Enhanced 64-pixel superpixel trigger scheme generation. 2018-10-22 00:37 bernlohr * cfg/CTA/: camera_CHEC-S_x9r_7mm.dat (1.1, prod6beta1, prod5), CTA-PROD4-SST-CHEC-S-camera.cfg (1.10), camera_CHEC-S_x9r.dat (1.1, prod6beta1, prod5): Camera definition files for CHEC-S with proper trigger scheme and with pixel positions as before. Thresholds adapted but a little fine-tuning may still be useful. 2018-10-21 12:33 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.21): Re-evaluated safe threshold with slightly higher NSB pixel rate than initially assumed. 2018-10-20 00:09 bernlohr * Cameras/modular_camera.cc (1.11): Fix a couple of invalid superpixel combinations generated with 64-pixel modules. 2018-10-19 22:42 bernlohr * corsika/: iact.c (1.115), iact_full5.c (1.115): Report proper version 1.56. 2018-10-19 22:40 bernlohr * corsika/: iact.c (1.114), iact_full5.c (1.114): Write welcoming message to stdout rather than stderr. 2018-10-19 14:42 bernlohr * cfg/CTA/lvr3_nepomuk.dat (1.1, prod6beta1, prod5): One more contributed but unused PDE curve. 2018-10-19 14:39 bernlohr * cfg/CTA/gct_primary_segments_hex.dat (1.1, prod6beta1, prod5): Not the proper segmentation but preserve it in CVS as an example. 2018-10-19 14:37 bernlohr * cfg/CTA/disc_shape_CHEC-S_27042018.dat (1.1, prod6beta1, prod5): Add new CHEC-S pulse shape. 2018-10-19 14:34 bernlohr * cfg/CTA/: PDE_LVR2_75um_3V.dat (1.1), PDE_LVR2_75um_4V.dat (1.1), PDE_LVR3_50um_3V.dat (1.1), PDE_LVR3_75um_3V.dat (1.1), PDE_LVR3_75um_4V.dat (1.1), PDE-LVR-6050-CN-SMP2_SN14.dat (1.1) (utags: prod5, prod6beta1): Add some contributed but currently not used PDE curves to CVS. 2018-10-19 14:26 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.20): Select 'ppmm' shaping as the default. 2018-10-19 12:01 bernlohr * Cameras/modular_camera.cc (1.10): Also report for which generator type the modular_camera program was compiled. 2018-10-19 11:35 bernlohr * Cameras/pixel_remap_trg.cc (1.5): Add reverse mapping which just takes over the x/y positions of pixels in the second file but otherwise preserves the first file. 2018-10-18 18:10 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.9): Updating with current threshold results for various CHEC-S configurations. 2018-10-18 14:56 bernlohr * Cameras/modular_camera.cc (1.9): More feature additions for generating better and more flexible SST-2M camera definitions. 2018-10-17 21:14 bernlohr * Cameras/pixel_remap_trg.cc (1.4): Don't add space in trigger lines in and around '[...]' parts. 2018-10-17 19:41 bernlohr * LightEmission/pixled.cc (1.4): Add option to fire also 'slave' pixels (in [...] group) whenever the leading pixel is selected to fire. 2018-10-16 19:12 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.19), CTA-PROD4-SST-ASTRI-camera.cfg (1.8): Updating threshold settings for ASTRI and SST-1M. 2018-10-12 17:28 bernlohr * cfg/CTA/pulse_CHEC-S_FADC_27042018.dat (1.1, prod6beta1, prod5): Using new CHEC pulse shape in explicit format now. 2018-10-12 16:39 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.8): Use pixels aligned in modules, all pixel gain differences accounted for by gain_variation. 2018-10-12 15:06 bernlohr * Cameras/showcam.gpl.sh (1.14): Include 7mm camera option of CHEC-S on ASTRI. 2018-10-12 15:05 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.7): Report on log output when using the 7mm camera option. 2018-10-12 15:00 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-camera.cfg (1.7): Mark the pixels_parallel=2 setting (which would be the correct choice) as an option. 2018-10-12 14:59 bernlohr * cfg/CTA/pulse_SST1M_dark.dat (1.1, prod6beta1, prod5): Add new SST-1M pulse shape. 2018-10-12 14:56 bernlohr * hess/Makefile.hess (1.205): New SST-1M pulse shape was missing from distribution. 2018-10-12 14:24 bernlohr * cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.6): Really add 7mm pixel option as a separate camera configuration data file. 2018-10-11 16:59 bernlohr * p4eff.sh (1.6), Cameras/fov.cc (1.8), Cameras/showcam.gpl.sh (1.13): Add a few lines of output to 'fov' program and process extra configurations with p4eff and showcam. 2018-10-11 16:57 bernlohr * hess/Makefile.hess (1.204): Export larger pixel CHEC camera definition file. 2018-10-11 16:53 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.18), CTA-PROD4-SST-ASTRI-camera.cfg (1.6), CTA-PROD4-SST-CHEC-S-camera.cfg (1.5): Updated camera parameters, including latest NSB evaluation. Still need to evaluated safe-threshold values. 2018-10-11 16:52 bernlohr * cfg/CTA/checs_pixel_mapping_7mm.dat (1.1, prod6beta1, prod5): Add approximate camera definition for a CHEC-S camera with larger pixels. 2018-10-11 16:45 bernlohr * cfg/CTA/checs_pixel_mapping_v2.dat (1.2, prod6beta1, prod5): Using "funnel_perfect.dat" instead of trying reflection in cone. 2018-10-05 18:55 bernlohr * param_comp/mk_param_evo.sh (1.13): Use last version before recent MC-SST meeting as a reference version, in order to highlight recent changes. 2018-10-05 18:54 bernlohr * param_comp/param_comp.sh (1.5): Sort parameters by name. 2018-10-05 18:52 bernlohr * doc_src/sim_hessarray.tex (1.85): Minor documentation changes. 2018-10-05 18:51 bernlohr * hess/Makefile.hess (1.203): Export new configuration data files. 2018-10-05 18:43 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.17), CTA-PROD4-SST-ASTRI-camera.cfg (1.5), CTA-PROD4-SST-ASTRI-optics.cfg (1.7), CTA-PROD4-SST-CHEC-S-camera.cfg (1.4), CTA-PROD4-SST-GCT-optics.cfg (1.6, prod6beta1, prod5), CTA-PROD4-common.cfg (1.3), checs_pixel_mapping_v2.dat (1.1), filter_SST1M_fusedsilica.dat (1.1, prod6beta1, prod5), gctReflectivity_2018-10-05.dat (1.1, prod6beta1, prod5), ref_SST1M_DOJLO_ave_extrapol.dat (1.1, prod6beta1, prod5): Updating SST parameters after MC-SST meeting. 2018-10-05 17:22 bernlohr * cfg/CTA/SPE_Gentile_oxt0d08_spe0d05_d2018-10-04.txt (1.1, prod6beta1, prod5): Single p.e. response derived form model for assumed 8% optical cross talk. 2018-09-29 19:00 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.16): There are too many options now with all the shaping options and old as well as new (LVR3) PDE to evaluate them in time but make sure shaping file matches selected option. 2018-09-28 18:02 bernlohr * p4eff.sh (1.5), p4eff_all.sh (1.4), hess/Makefile.hess (1.202): Efficiency calculations need defines for using 1-D tables also with ASTRI+CHEC and, for the camera transmission also with GCT. 2018-09-28 17:42 bernlohr * cfg/CTA/PDE_V_4.4V_LVR5_ext.txt (1.1, prod6beta1, prod5): Latest LVR3 50 \mu m 4.4V overvoltage curve extended to shorter+longer w.l. 2018-09-28 17:36 bernlohr * cfg/CTA/: CTA-PROD4-SST-1M.cfg (1.15), CTA-PROD4-SST-ASTRI-camera.cfg (1.4), CTA-PROD4-SST-CHEC-S-camera.cfg (1.3), CTA-PROD4-SST-GCT-optics.cfg (1.5): Re-evaluated NSB pixel rates. Using off-axis drop for ASTRI and GCT now. 2018-09-28 13:36 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-optics.cfg (1.6): Using telescope_transmission values after latest evaluation. 2018-09-25 22:53 bernlohr * cfg/CTA/CTA-PROD4-SST-GCT-optics.cfg (1.4): Redo telescope_transmission function fit with latest ray-tracing compared to ROBUST results. 2018-09-24 21:07 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-camera.cfg (1.3): Preprocessor condition around pixeltrg_time_step setting did not work (0/1 suffix not provided to preprocessor), thus dropping. Thresholds from recent re-evaluation used for now. 2018-09-21 19:15 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-optics.cfg (1.5): Fix position of shadowing elements. 2018-09-21 19:15 bernlohr * rx.cc (1.4): Add option to use the efficiency factors in column 18 and 19. 2018-09-21 18:20 bernlohr * hess/Makefile.hess (1.201): Export also the 90 deg rotated ('flipped') versions of the GCT primary mirror segmentation. 2018-09-21 18:18 bernlohr * cfg/CTA/: gct_primary_segments_poly-flipped.dat (1.1), gct_prototype_primary_segments-flipped.dat (1.1) (utags: prod5, prod6beta1): Versions of the GCT (prototype and pre-production design) with segments rotated by 90 degrees for PSF calculations along the other orientation. 2018-09-21 16:54 bernlohr * cfg/CTA/gct_prototype_primary_segments.dat (1.2, prod6beta1, prod5): Add format description. 2018-09-20 22:48 bernlohr * cfg/CTA/CTA-PROD4-common.cfg (1.2): Use stereo trigger by default if there is more than one telescope. 2018-09-20 17:34 bernlohr * doc_src/sim_hessarray.tex (1.84): The description of pixels_parallel was outdated. 2018-09-20 17:23 bernlohr * doc_src/sim_hessarray.tex (1.83): Two parameter names were used incorrectly. The secondary_shadow_offset parameter now described in more detail. 2018-09-20 15:31 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI-optics.cfg (1.4): Typo in comment fixed. 2018-09-20 15:20 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI+CHEC-S.cfg (1.2), CTA-PROD4-SST-GCT-optics.cfg (1.3): Updating the CHEC camera body depth a bit reminded me of camera shadowing in ASTRI+CHEC-S actually needs the CHEC camera body parameters there. 2018-09-20 14:55 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.14), CTA-PROD4-MST-FlashCam.cfg (1.11), CTA-PROD4-MST-NectarCam.cfg (1.9), CTA-PROD4-MST-optics.cfg (1.11), CTA-PROD4-SCT.cfg (1.7), CTA-PROD4-SST-1M.cfg (1.14), CTA-PROD4-SST-ASTRI+CHEC-S-prototype.cfg (1.3, prod6beta1, prod5), CTA-PROD4-SST-ASTRI-camera.cfg (1.2), CTA-PROD4-SST-ASTRI-optics.cfg (1.3), CTA-PROD4-SST-CHEC-S-camera.cfg (1.2), CTA-PROD4-SST-GCT-optics.cfg (1.2): Setting optics and camera versions to current date (although most are actually older). 2018-09-20 14:31 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI-optics.cfg (1.2), CTA-PROD4-SST-ASTRI-prototype.cfg (1.5, prod6beta1, prod5): Updated shadowing parameters for ASTRI preproduction design according to 2017-10-19 report. Prototype may still need separate adjustment. 2018-09-20 14:25 bernlohr * param_comp/: mk_param_comp.sh (1.4), param_comp.sh (1.4): Parameter comparison now by default for prod-4, including prototypes as well as CHEC+ASTRI configuration. 2018-09-20 14:24 bernlohr * hess/hess_defaults.h (1.119): The fifth baffle parameter is now formally accepted although any other value than the preset 0. (=cylindrical baffle) is not recommended. 2018-09-19 19:34 bernlohr * corsika/: README (1.83), README.tex (1.74): Update file sizes. 2018-09-19 15:59 bernlohr * multi/multi_cta-prod4-paranal-sst-only-step1.cfg (1.2, prod6beta1, prod5): Use a more descriptive output file name, from environment variables set by multipipe_corsika. 2018-09-19 15:57 bernlohr * util/corsika_autoinputs.cc (1.22): Add one extra check before setting up the CORSIKA_WORKDIR environment variable. 2018-09-19 15:54 bernlohr * util/multipipe_corsika.c (1.21): Non-POSIX-conformant systems (like MacOS) may not have user real-time signals available. Disable sequential mode for those. 2018-09-18 18:01 bernlohr * cfg/hess2/hess-phase2b.cfg (1.13, prod6beta1, phase2d3, prod5): Use mono trigger automatically if only one telescopes is to be simulated. 2018-09-18 17:51 bernlohr * cfg/hess2/hess-phase2c.cfg (1.4): Get rid of warning about undefined TELESCOPE when processing global config. 2018-09-17 18:17 bernlohr * corsika/: Makefile.dist (1.72), README (1.82), README.tex (1.73), corsika.dox (1.31), iact.c (1.113), iact_full5.c (1.113): For version 1.56 there are some environment variables set from values in the run header block and a few from the inputs lines. And environment variables can now be set in the inputs file. 2018-09-14 16:01 bernlohr * generic_run.sh (1.40), hess/Makefile.hess (1.200): Include astri+chec-s configuration and sst-only simulations. 2018-09-14 16:00 bernlohr * multi/: multi_cta-prod4-paranal-sst-only-step1.cfg (1.1), multi_cta-prod4-sst-1m.cfg (1.2, prod6beta1, prod5), multi_cta-prod4-sst-astri+chec-s.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-sst-astri.cfg (1.2, prod6beta1, prod5), multi_cta-prod4-sst.cfg (1.2), multi_cta_prod4-lst-psf.cfg (1.1, prod6beta1, prod5): Prepare prod-4 SST simulation to include ASTRI+CHEC-S configuration and prepare for dual (or multiple) step simulation where only the CORSIKA files are stored in the first step. 2018-09-14 15:17 bernlohr * util/: extract_corsika_multi.c (1.4), extract_corsika_tel.c (1.5): Add option to print CORSIKA environment variables with leading 'export '. 2018-09-11 15:22 bernlohr * param_comp/mk_param_evo.sh (1.12): Parameter evolution within prod-4 no longer w.r.t. v0.1. 2018-09-11 15:21 bernlohr * common/mc_aux.h (1.161): Increase the default maximum number of FADC slices that can be handled from 128 to 160 for prod4, to allow for more room to place traces. 2018-09-07 17:53 bernlohr * cfg/CTA/CTA-PROD4-SST-1M-prototype.cfg (1.3, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-ASTRI+CHEC-S-prototype.cfg (1.2), cfg/CTA/CTA-PROD4-SST-ASTRI+CHEC-S.cfg (1.1), cfg/CTA/CTA-PROD4-SST-ASTRI-camera.cfg (1.1), cfg/CTA/CTA-PROD4-SST-ASTRI-optics.cfg (1.1), cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.20), cfg/CTA/CTA-PROD4-SST-CHEC-S-camera.cfg (1.1), cfg/CTA/CTA-PROD4-SST-GCT-optics.cfg (1.1), cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.15), hess/Makefile.hess (1.199), param_comp/mk_param_evo.sh (1.11): Modular GCT and ASTRI configuration files; easy to define a CHEC on ASTRI. 2018-09-07 01:18 bernlohr * common/mc_aux.h (1.160), common/rndm2.c (1.5), common/rndm2.h (1.6), common/sim_absorb.c (1.26), common/sim_config.c (1.163), common/sim_histograms.c (1.27, prod5), common/sim_imaging.c (1.83), common/sim_telarray.c (1.138), hess/sim_conv2hess.c (1.114): Rework the STORE_PIX_PHOTONS option without bypassing the raytracing step. 2018-09-07 01:15 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI+CHEC-S-prototype.cfg (1.1): Try an prod4-style configuration with CHEC-S camera in the ASTRI prototype. 2018-09-04 20:29 bernlohr * LightEmission/pixled.cc (1.3): Enhance pixled program to use pixel definitions from the camera definition file read anyway, either a random selection of them or brute-force processing of all of them (may be VERY CPU-intense). 2018-09-03 19:09 bernlohr * Copyright (1.6), sim_hessarray.dox (1.13): Update last year/date. 2018-09-03 18:45 bernlohr * common/: sim_imaging.c (1.82), sim_signal.c (1.89): Add ioptional extra trigger debug output and check trigger lines in camera config files for duplicate pixel IDs, which used to be accounted for each time, now with duplicates ignored or resulting in an error. 2018-09-03 18:41 bernlohr * cfg/CTA/CTA-PROD4-site.cfg (1.3): Recently added '#elseif' linei, unknown to preprocessor, changed to '#elif'. 2018-09-03 18:40 bernlohr * LightEmission/pixled.cc (1.2): Initialize run before reading camera file since include paths are set up in run initialisation. 2018-08-31 18:30 bernlohr * cfg/CTA/CTA-PROD4-sipm.cfg (1.3, prod6beta1, prod5): Use a non-zero value of 120x120 cells in a SiPM pixel. 2018-08-31 18:27 bernlohr * common/mc_aux.h (1.159), common/sim_config.c (1.162), common/sim_signal.c (1.88), doc_src/sim_hessarray.tex (1.82), hess/hess_defaults.h (1.118): Add pixel saturation corresponding to already fired SiPM cells. 2018-08-30 20:54 bernlohr * LightEmission/: Doxyfile (1.3, prod5), IactLightEmission.cc (1.8), IactLightEmission.hh (1.12), Makefile (1.10), fake-muon.cc (1.5, prod5), ff-1m.cc (1.6, prod5), ff-gct.cc (1.5, prod5), fpls.cc (1.3, prod5), ls-beam.cc (1.4, prod5), ls-geo-test.cc (1.5, prod5), ls-test.cc (1.1, prod5), nsbls.cc (1.3, prod5), octo.cc (1.3, prod5), pixled.cc (1.1), xyls.cc (1.1, prod5), xyzls.cc (1.1, prod5): Adding program for simulated LEDs in front of pixels. Fix generated documentation. Also add a couple of test programs which were not in CVS so far. 2018-08-29 19:07 bernlohr * LightEmission/: IactLightEmission.cc (1.7), IactLightEmission.hh (1.11), fake-muon.cc (1.4), ff-1m.cc (1.5), ff-gct.cc (1.4), ls-beam.cc (1.3), nsbls.cc (1.2): With (more) include path options for data files. Take care of 'nbunches' where int can be too short in some cases. 2018-08-28 17:51 bernlohr * LightEmission/: IactLightEmission.hh (1.10), ls-geo-test.cc (1.4): Cleanup after adding DistanceVectorTo(). 2018-08-27 18:24 bernlohr * cfg/CTA/CTA-PROD4-LaPalma-baseline.cfg (1.4), cfg/CTA/CTA-PROD4-Paranal-baseline.cfg (1.4), cfg/CTA/CTA-PROD4-site.cfg (1.2), doc_src/sim_hessarray.tex (1.81), hess/Makefile.hess (1.198): Include low-extinction optional atmospheric transmission for Paranal and La Palma. 2018-08-27 18:17 bernlohr * cfg/common/: atm_trans_0_6_1_0_0_0.dat (1.1), atm_trans_2150_1_10_0_0_2150_0.1.dat (1.1), atm_trans_2150_1_10_0_0_2150_10.0.dat (1.1), atm_trans_2150_1_10_1_0_2150.dat (1.1), atm_trans_2150_1_10_1_0_2150_0.1.dat (1.1), atm_trans_2150_1_10_1_0_2150_10.0.dat (1.1), atm_trans_2150_1_10_2_0_2150.dat (1.1), atm_trans_2150_1_10_2_0_2150_0.1.dat (1.1), atm_trans_2150_1_10_2_0_2150_10.0.dat (1.1), atm_trans_2158_1_1_0_0_2158.dat (1.1), atm_trans_2158_1_3_0_0_0_0.1_0.1.dat (1.1), atm_trans_2158_1_3_1_0_0_0.1.dat (1.1), atm_trans_2158_1_3_2_0_0_0.0_0.0.dat (1.1), atm_trans_2158_1_3_2_0_0_0.1.dat (1.1) (utags: prod5, prod6beta1): More extinction options for Paranal and La Palma. 2018-08-22 17:54 bernlohr * param_comp/mk_param_evo.sh (1.10): When not using '-f' (full history) option, use 2018-02-16 as a reference for recent prod-4 configuration changes rather than the no longer listed prod4-v0.1. 2018-08-22 17:35 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.19): Enable recording of pixel trigger times with new sim_telarray versions. 2018-08-22 17:13 bernlohr * common/mc_aux.h (1.158), common/sim_config.c (1.161), common/sim_signal.c (1.87), hess/hess_defaults.h (1.117), hess/sim_conv2hess.c (1.113): Add pixel trigger time recording. 2018-08-20 17:02 bernlohr * param_comp/mk_param_evo.sh (1.9): Early prod-3 and prod-4 configurations not included any more by default. Adding prototype configurations where they exist. 2018-08-20 17:00 bernlohr * hess/Makefile.hess (1.197): Export new ASTRI primary mirror segmentation files. 2018-08-20 17:00 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI-prototype.cfg (1.4), CTA-PROD4-SST-ASTRI.cfg (1.18): Fix new typo meant as a comment. ASTRI prototype optics marked in config name. 2018-08-20 15:04 bernlohr * LightEmission/IactLightEmission.hh (1.9): Distinguish DistanceVectorFrom and DistanceVectorTo (opposite directions). 2018-08-20 15:00 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI-prototype.cfg (1.3), CTA-PROD4-SST-ASTRI.cfg (1.17), astri_M1_segments_pre-production.dat (1.1, prod6beta1, prod5), astri_M1_segments_prototype.dat (1.1, prod6beta1, prod5): ASTRI prototype M1 segments are 90 degrees rotated w.r.t. pre-production design. 2018-08-13 21:00 bernlohr * p4eff.sh (1.4), p4eff_all.sh (1.3): Also generate efficiency values for HESS. 2018-08-13 18:09 bernlohr * LightEmission/: IactLightEmission.hh (1.8), ls-geo-test.cc (1.3): Add method for shortest vector from point to line. 2018-08-07 12:59 bernlohr * hess/Makefile.hess (1.196): Export more MST reflector variants. 2018-08-07 12:59 bernlohr * hess/sim_conv2hess.c (1.112): Fix compiler warning about unused variable. 2018-08-07 12:58 bernlohr * cfg/CTA/: mirror_CTA-100_1.20-72-0.04.dat (1.1), mirror_CTA-100_1.20-80-0.04.dat (1.1): MST reflector with less mirror tiles, for comparison tests. 2018-08-06 17:30 bernlohr * corsika/: README (1.81), README.tex (1.72): Actually two of these changes reported for 1.55 were already in 1.54. 2018-08-06 17:27 bernlohr * corsika/: Copyright (1.11), README (1.80), README.tex (1.71): Documentation update on changes in v1.55. 2018-08-03 18:26 bernlohr * common/mc_aux.h (1.157), common/sim_config.c (1.160), common/sim_signal.c (1.86), common/sim_telarray.c (1.137), hess/hess_defaults.h (1.116), hess/sim_conv2hess.c (1.111): On request (and -DWITH_AUX_TRACES) sim_telarray can write auxilliary traces from its internal processing into the data file, suitable for later comparison with digitized pixel traces. 2018-08-03 18:24 bernlohr * corsika/README (1.79): Update reported file sizes. 2018-07-20 13:49 bernlohr * hess/hess_defaults.h (1.115): Allow lower laser illumination level (for single-p.e. measurements in dark environment). 2018-07-19 19:55 bernlohr * corsika/: Makefile.dist (1.71), README.tex (1.70), corsika.dox (1.30), iact.c (1.112), iact_full5.c (1.112): Bump version number. 2018-07-19 19:42 bernlohr * corsika/iact.c (1.111): Negative values of the photons in a bunch could get used to mark its kind of origin (e.g. from fluorescence). 2018-07-19 18:22 bernlohr * Cameras/pixel_remap_trg.cc (1.3), common/sim_telarray.c (1.136), corsika/iact_full5.c (1.111): Negative values of the photons in a bunch could get used to mark its kind of origin (e.g. from fluorescence). 2018-07-18 18:07 bernlohr * doc_src/sim_hessarray.tex (1.80): Update mirror_degraded_reflectivity parameter description. 2018-07-18 15:13 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.13), CTA-PROD4-MST-optics.cfg (1.10): Updating random reflection angle to correspond to measured spot sizes. 2018-06-14 17:38 bernlohr * hess/Makefile.hess (1.195): Exporting the same programs that get also exported into the stand-alone LightEmission package. 2018-06-08 18:18 bernlohr * hess/Makefile.hess (1.194): Export additional digital sum trigger shaping files. 2018-06-08 18:12 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.12), CTA-PROD4-MST-NectarCam.cfg (1.8), CTA-PROD4-SST-1M.cfg (1.13), CTA-PROD4-SST-ASTRI.cfg (1.16), CTA-PROD4-SST-GCT.cfg (1.14), dsum-shaping-pom-pz.dat (1.1, prod6beta1, prod5), dsum-shaping-ppmm-pz.dat (1.3, prod6beta1, prod5): Updating config files with some threshold updates, NSB updates, optical efficiency updates, and for the other SSTs an option to use the LVR PDE already assumed for ASTRI. 2018-06-08 16:21 bernlohr * cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.13): Tiny improvement in angular dependence of telescope transmission for GCT. 2018-06-08 14:25 bernlohr * cfg/CTA/: CTA-PROD4-SST-GCT.cfg (1.12), gct_primary_segments.dat (1.2, prod6beta1, prod5), gct_primary_segments_sqr.dat (1.2, prod6beta1, prod5): Polygon segments are the default segment type now for GCT. Only works with up-to-date sim_telarray. 2018-06-08 14:24 bernlohr * cfg/CTA/gct_primary_segments_poly.dat (1.1): Polygon primary mirror segments for GCT. 2018-06-08 14:23 bernlohr * common/: mc_aux.h (1.156), sim_imaging.c (1.81): Add primary or secondary segments with convex polygon shapes. 2018-06-05 16:55 bernlohr * cfg/hess2/hess-phase2c.cfg (1.3), hess/Makefile.hess (1.193), multi/multi_phase2c.cfg (1.2, prod6beta1, prod5): Updates for HESS1U. 2018-06-05 16:54 bernlohr * util/rpolist.c (1.6): Add option to evaluate at given intervals in given range(s) in x or x/y. 2018-06-04 19:40 bernlohr * Cameras/fov.cc (1.7): If you pass the config file name to the program rather than piping it to standard input, the name can be show in the log output. 2018-06-04 19:25 bernlohr * Cameras/showcam.gpl.sh (1.12): Command-line option to switch to prod-3 version. Use 'patch' version file for SST-1M now in prod-4 version. 2018-06-01 15:57 bernlohr * hess/Makefile.hess (1.192): Also export updated GCT primary mirror segmentation. 2018-06-01 15:53 bernlohr * cfg/CTA/: CTA-PROD4-SST-GCT-prototype.cfg (1.4, prod6beta1, prod5), CTA-PROD4-SST-GCT.cfg (1.11), gct_primary_segments_sqr.dat (1.1), gct_prototype_primary_segments.dat (1.1): Updated configuration for GCT prototype and pre-production design mirror, resulting NSB, and applicable threshold. 2018-05-30 16:43 bernlohr * Cameras/pixel_remap_trg.cc (1.2): Actually write the remapped trigger definitions, optionally together with the non-trigger-definition part (pixel positions etc.) from the second file. 2018-05-28 16:03 bernlohr * cfg/hess2/: hess2_ct5fc.cfg (1.3), hess-phase2b-fc.cfg (1.1) (utags: phase2d3, prod5, prod6beta1): FlashCam on HESS CT5 configuration files. 2018-05-28 15:37 bernlohr * Cameras/showcam.gpl.sh (1.11): HESS-2 camera and FoV plot (now also with FlashCam installed) has to be done right after the listing for the shorter of the two effective focal lengths, in order to be consistent. 2018-05-24 19:34 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.12): Add one more shaping variant for dsum trigger. 2018-05-24 19:33 bernlohr * hess/Makefile.hess (1.191): Export also new dsum-shaping files. 2018-05-24 15:25 bernlohr * Cameras/showcam.gpl.sh (1.10): Produce plots either for prod-3 or for prod-4. 2018-05-24 15:24 bernlohr * common/sim_config.c (1.159): The 'none' filter setting for digital sum trigger did not work. 2018-05-24 15:23 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.11): More digital sum filter options for DigiCam. 2018-05-24 14:44 bernlohr * cfg/CTA/: dsum-shaping-one.dat (1.1, prod6beta1, prod5), dsum-shaping-pm-pz.dat (1.1, prod6beta1, prod5), dsum-shaping-ppmm-pz.dat (1.2): Add a dummy shaping kernel file (for older sim_telarray versions where 'none' used not to work) and an integer version of the direct differencing with pole-zero compensation (for DigiCam pulse shape). 2018-05-24 12:54 bernlohr * cfg/CTA/: dsum-shaping-pm.dat (1.1, prod6beta1, prod5), dsum-shaping-pom.dat (1.1, prod6beta1, prod5), dsum-shaping-ppmm-pz.dat (1.1), dsum-shaping-ppmm.dat (1.1, prod6beta1, prod5), dsum-shaping-ppomm.dat (1.1, prod6beta1, prod5): Add the digital sum trigger shaping kernels in use or under consideration for FlashCam/DigiCam, without specific production version in the name. 2018-05-23 14:37 bernlohr * util/pfp.c (1.11): Added some debugging output (when compiled accordingly). While arithmetic operations were never foreseen, and any such operation in preprocessor conditionals resulted in a boolean, they are now explicitly forbidden. 2018-05-12 19:01 bernlohr * common/mc_aux.h (1.155), common/sim_absorb.c (1.25), common/sim_config.c (1.158), common/sim_histograms.c (1.26), common/sim_signal.c (1.85), common/sim_telarray.c (1.135), hess/hess_defaults.h (1.114), hess/sim_conv2hess.c (1.110): Camera configuration file may scale QE (PDE) and gain of individual pixels, and may also override the pixel orientation. Alternatively pixels can be oriented module-wise. The night-sky background can fall off radially by a function similar to that already used to describe shadowing not handled explicitly by sim_telarray. 2018-05-12 18:55 bernlohr * common/sim_imaging.c (1.80): Pixels may be aligned by individual configuration parameters or controlled through the 'pixels_parallel' telescope parameter where the new value 2 sets all pixels in the same module to look into the same direction and with pixel entrance in the same plane. 2018-05-12 18:50 bernlohr * doc_src/sim_hessarray.tex (1.79): Describe new configuration parameters and values. 2018-05-12 18:11 bernlohr * param_comp/mk_param_evo.sh (1.8): Array configuration name etc. is a new global parameter. 2018-05-12 18:09 bernlohr * util/rpolist.c (1.5): Output numbers with higher precision than before. 2018-05-12 18:08 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.11), CTA-PROD4-LaPalma-baseline.cfg (1.3), CTA-PROD4-MST-FlashCam.cfg (1.10), CTA-PROD4-MST-NectarCam.cfg (1.7), CTA-PROD4-MST-optics.cfg (1.9), CTA-PROD4-Paranal-baseline.cfg (1.3), CTA-PROD4-SCT.cfg (1.6), CTA-PROD4-SST-1M.cfg (1.10), CTA-PROD4-SST-ASTRI.cfg (1.15), CTA-PROD4-SST-GCT.cfg (1.10): Add configuration names as config parameters. 2018-05-12 18:00 bernlohr * LightEmission/: IactLightEmission.cc (1.6), IactLightEmission.hh (1.7), Makefile (1.9), nsbls.cc (1.1): Add class for diffuse background light source and NSB light source program. 2018-05-11 14:46 bernlohr * LightEmission/ls-geo-test.cc (1.2): Need a temporary copy for testing rotations of P345. 2018-05-11 14:03 bernlohr * common/rpolator.c (1.9): Automatically interpret a 'YLOG' option for a 1-D table as 'ZLOG' which it was most likely meant to be. 2018-05-04 22:45 bernlohr * corsika/atmo.c (1.24): Include fast interpolation additions by L. Arrabito as FAST_INTERPOLATION2 option (not active by default for now). 2018-05-04 20:41 bernlohr * corsika/iact.c (1.110): Regenerated file. 2018-05-04 20:41 bernlohr * corsika/: iact.c (1.109), iact_full5.c (1.110): Temporary "cbunch" files explicitely in current working directory because otherwise they might not be found there again, for unfortunate search path settings. 2018-05-01 20:53 bernlohr * cfg/common/: atm_trans_2158_1_3_0_0_0.dat (1.2), atm_trans_2158_1_3_1_0_0_0.1_0.1.dat (1.2), atm_trans_2158_1_3_2_0_0.dat (1.2), atm_trans_2158_1_3_2_0_0_0.1_0.1.dat (1.2), atm_trans_2158_1_4_0_0_0.dat (1.2) (utags: prod5, prod6beta1): Same supporting altitudes for the whole set of 2158 m transmission tables. 2018-04-30 14:17 bernlohr * LightEmission/: IactLightEmission.hh (1.6), ls-geo-test.cc (1.1): Extending geometry functionality and adding a test program for the geometry part. 2018-04-26 16:02 bernlohr * Cameras/: mapmtpix.cc (1.4), modular_camera.cc (1.8), smartpix.cc (1.6): Extend and unify comments about PixType and Pixel lines written into generated camera configuration files. 2018-04-09 16:17 bernlohr * cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.9): Make discriminator amplitudes and thresholds in (mean!) p.e. units the default for now although they should better measure amplitudes in physical units. 2018-04-06 16:37 bernlohr * p4eff_all.sh (1.2): Also create ASCII files for inclusion into efficiency spreadsheet files. 2018-04-06 16:35 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.10), CTA-PROD4-MST-FlashCam.cfg (1.9), CTA-PROD4-MST-NectarCam.cfg (1.6), CTA-PROD4-SST-1M.cfg (1.9), CTA-PROD4-SST-ASTRI.cfg (1.14), CTA-PROD4-SST-GCT.cfg (1.8): Minor update of NSB pixel rates. 2018-04-06 15:40 bernlohr * multi/multi_cta-prod4-lapalma-baseline.cfg (1.3, prod6beta1, prod5): Change experimental config name to production-ready name. 2018-04-06 15:38 bernlohr * p3eff.sh (1.12, prod6beta1, prod5): SST-1M has hex pixels not square. 2018-04-05 15:04 bernlohr * common/mc_aux.h (1.154), common/sim_signal.c (1.84), hess/sim_conv2hess.c (1.109): Fix the reported pedestal value for DC coupled readout. 2018-04-04 21:40 bernlohr * cfg/CTA/camera_CTA-MST-FlashCam_patch3_digitalsum9_neweff.dat (1.2, prod6beta1, prod5): Wrong pixel hexagon orientation slipped back in. 2018-04-04 18:01 bernlohr * cfg/CTA/CTA-PROD4-sipm.cfg (1.2), doc_src/sim_hessarray.tex (1.78), hess/Makefile.hess (1.190), hess/hess_defaults.h (1.113): Set pm_gain_index to zero for SiPM sensors, accept such a value, and document it. 2018-04-04 18:00 bernlohr * multi/multi_cta-prod4-lapalma-baseline.cfg (1.2): New observation level and transmission table for La Palma to be applied. 2018-03-28 19:28 bernlohr * Mirrors/: Makefile (1.2), draw_mirrors.c (1.11, prod6beta1) (utags: prod5): Enhance mirror drawing and fix calculation and drawing of enclosing circle. Note that all length parameters are now meters. 2018-03-28 00:34 bernlohr * cfg/common/atm_trans_2158_1_0_0_0_0.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2158_1_10_0_0_0.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2158_1_1_0_0_0.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2158_1_3_0_0_0.dat (1.1), cfg/common/atm_trans_2158_1_3_0_0_0_0.1.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2158_1_3_1_0_0_0.1_0.1.dat (1.1), cfg/common/atm_trans_2158_1_3_2_0_0.dat (1.1), cfg/common/atm_trans_2158_1_3_2_0_0_0.1_0.1.dat (1.1), cfg/common/atm_trans_2158_1_4_0_0_0.dat (1.1), cfg/common/atm_trans_2158_1_6_0_0_0.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.189): Using observation level 2158 m now for La Palma. Generated a variety of atmospheric transmission tables. Use haze=3, season=2 for low extinction. 2018-03-27 22:03 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.8): Axis offsets and description of requirements for CORSIKA fiducial spheres for the MSTs. 2018-03-27 18:46 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.8), common/mc_aux.h (1.153), common/sim_config.c (1.157), common/sim_imaging.c (1.79): Implemented offset between azimuth and altitude axis as well as between altitude axis and optical axis. First telescope to get this configured is SST-1M. 2018-03-24 12:19 bernlohr * corsika/atmo.c (1.23): Fix two typos in debugging output. 2018-03-24 12:17 bernlohr * param_comp/: mk_param_comp.sh (1.3), param_comp.sh (1.3): For prod-4 parameters (in contrast to prod-3) we need to change the GCT-M to indicate the prototype. 2018-03-24 12:15 bernlohr * doc_src/sim_hessarray.tex (1.77): Adding description on effective length parameter. 2018-03-23 19:31 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.9), CTA-PROD4-MST-optics.cfg (1.7), CTA-PROD4-SCT.cfg (1.5), CTA-PROD4-SST-1M.cfg (1.7), CTA-PROD4-SST-ASTRI.cfg (1.13), CTA-PROD4-SST-GCT.cfg (1.7): Adding effective focal length to prod-4 config files. 2018-03-23 19:12 bernlohr * common/mc_aux.h (1.152), common/sim_config.c (1.156), hess/hess_defaults.h (1.112), hess/sim_conv2hess.c (1.108): Record and given effective focal length in the data. If there is none given (necessary for backward compatibility) an estimated one may be used internally (not used so far) but it is not recorded in the data. 2018-03-23 15:47 bernlohr * common/rpolator.c (1.8), common/rpolator.h (1.7), util/rpolist.c (1.4): Fix handling of 1-D tables with x in descending order. 2018-03-22 13:43 bernlohr * corsika/mkbern.sh (1.4, prod6beta1, prod5): More flexibility of script for rebuilding 'bernlohr' directory. 2018-03-21 17:29 bernlohr * util/corsika_autoinputs.cc (1.21): For simulations with certain features in iact_full5.c there may be extra data files needed. Optionally also generate symlinks for those. 2018-03-16 18:43 bernlohr * p4eff.sh (1.3), testeff.c (1.40), cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.12), cfg/CTA/PDE_ASTRI_LVR.dat (1.3, prod6beta1, prod5): Extending testeff calculations beyond 1000 nm. More calculations for ASTRI NSB rate. 2018-03-16 18:09 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI.cfg (1.11), PDE_ASTRI_LVR.dat (1.2): Allow to switch to the old PDE on request, for comparison of expected NSB p.e. rates. 2018-03-16 18:06 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.6): New fit for telescope transmission function. 2018-03-15 17:06 bernlohr * sim_hessarray.dox (1.12), Cameras/hesspix.c (1.3, prod6beta1, prod5), Cameras/hesspix3.c (1.2, prod6beta1, prod5), Cameras/scale_pix.c (1.2, prod5), Cameras/testpix.c (1.2, prod6beta1, prod5), Mirrors/draw_mirrors.c (1.10), common/absorb.h (1.13), common/rpolator.h (1.6), common/sim_config.c (1.155), corsika/gd_image.c (1.6), corsika/gd_image.h (1.2), corsika/sampling.c (1.6, prod5), hess/rec_tools.c (1.7), hess/rec_tools.h (1.3, prod6beta1, prod5), util/multipipe_corsika.c (1.20), util/pfp.c (1.10), util/tree.c (1.5), util/tree.h (1.6): Make doxygen source code documentation more happy with its file list. 2018-03-15 15:51 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.5): Effective optical area from detailed ray-tracing were already accounting for 1 m^2 of extra shadowing not explicitely included. Increased telescope transmission factor to avoid double-counting extra shadowing. 2018-03-15 15:41 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.8), No7-10_ave.dat (1.2, prod6beta1, prod5): Filter transmission was also unusable because in percent. Re-evaluated LST NSB pixel rate. 2018-03-15 15:30 bernlohr * cfg/CTA/ref_200_1100_180314_ver2.1a.dat (1.3, prod6beta1, prod5): Sorting in ascending order went wrong without LC_ALL=C. 2018-03-15 15:16 bernlohr * cfg/CTA/ref_200_1100_180314_ver2.1a.dat (1.2): Reflectivity was still in percent. 2018-03-15 15:09 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI.cfg (1.10), PDE_ASTRI_LVR.dat (1.1): Updated PDE and resulting NSB pixel rate for ASTRI. 2018-03-15 15:09 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.4): Updated random_focal_length of MST mirrors. 2018-03-15 15:08 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.7), ref_200_1100_180314_ver2.1a.dat (1.1): Updated LST reflectivity curve. 2018-03-15 15:07 bernlohr * param_comp/mk_param_evo.sh (1.7): Little fix for when to use 'SST-DC' or 'SST-1M' in the configuration name. 2018-03-15 15:05 bernlohr * p4eff.sh (1.2): Check for errors in the configuration file used before using the values. 2018-03-14 18:01 bernlohr * common/sim_config.c (1.154): Axes_offsets documented and available for configuration but not really implemented so far. 2018-03-14 17:59 bernlohr * doc_src/sim_hessarray.tex (1.76), hess/hess_defaults.h (1.111): Axes_offsets documented and available for configuration but not really implemented so far. 2018-03-14 17:57 bernlohr * cfg/hess2/: hess-phase2b.cfg (1.12), hess-phase2c.cfg (1.2): Updated HESS1U configuration. 2018-03-09 16:45 bernlohr * common/mc_aux.h (1.151), common/sim_config.c (1.153), common/sim_signal.c (1.83), doc_src/sim_hessarray.tex (1.75), hess/hess_defaults.h (1.110): Allow setting the (F)ADC sensitivity variation for low-gain separately from high-gain, with backwards-compatible defaults. 2018-03-09 16:04 bernlohr * generic_run.sh (1.39), cfg/hess2/hess-phase2c.cfg (1.1), hess/Makefile.hess (1.188), multi/multi_phase2c.cfg (1.1): HESS-2 simulations with HESS1U cameras configured as 'phase2c'. 2018-03-08 12:24 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.9): Fixed calculation of pedestal and gain variances etc. 2018-03-01 16:24 bernlohr * corsika/atmo.c (1.22): Also calculate the traversed atmospheric depth without refraction, once I am at it. 2018-03-01 16:21 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI.cfg (1.8), CTA-ULTRA6-SST-ASTRI.cfg (1.23, prod6beta1, prod5): Same problem also affecting fadc_var_pedestal and fadc_var_sensitivity. Fixed both values. 2018-03-01 16:05 bernlohr * cfg/CTA/: CTA-PROD4-SST-ASTRI.cfg (1.7), CTA-ULTRA6-SST-ASTRI.cfg (1.22): Fixing apparent typo in fadc_var_sensitivity (0.0172 instead of 0.137). 2018-02-28 22:16 bernlohr * corsika/: GNUmakefile (1.36), atmo.c (1.21): Another little atmo.c application is ray-tracing for the total atmospheric depth passed along the ray (back-tracing, including refraction). 2018-02-28 22:13 bernlohr * corsika/mkbern.sh (1.3): With or without Coreas. 2018-02-28 13:00 bernlohr * corsika/iact.c (1.108): Reenerated after commit. 2018-02-28 12:58 bernlohr * corsika/: iact.c (1.107), iact_full5.c (1.109): Adapt generated images for SHOWER_VIEW to match the region in the corresponding histograms. 2018-02-26 19:46 bernlohr * corsika/: corsika-76400-checktrack.patch (1.2, prod6beta1, prod5), gd_image.c (1.5), iact.c (1.106), iact.h (1.10), iact_full5.c (1.108): Drop the extra parameters for the iact_check_track function since the offsets and rotation angle are available from run and event headers. 2018-02-26 14:14 bernlohr * corsika/: corsika-75600.patch (1.1, prod6beta1, prod5), corsika-75700.patch (1.1, prod6beta1, prod5), corsika-76300.patch (1.1, prod6beta1, prod5), corsika-76400-checktrack.patch (1.1): Some of the newer CORSIKA patches were not in CVS yet. 2018-02-26 14:13 bernlohr * corsika/: iact.c (1.105), iact.h (1.9), iact_full5.c (1.107): Also need to CORSIKA-internal offsets for inclined showers at observation levels for the iact_check_track() function. 2018-02-23 18:04 bernlohr * corsika/mkbern.sh (1.2): Also write particle data to text files for plotting. 2018-02-23 16:14 bernlohr * hess/Makefile.hess (1.187): Also build programs in Cameras and Mirrors sub-directories, if possible. 2018-02-23 16:14 bernlohr * p4eff.sh (1.1), p4eff_all.sh (1.1), testeff.c (1.39): New scripts for prod-4 telescope efficiencies get as much data from the actual configuration files as possible. 2018-02-23 16:09 bernlohr * corsika/: Makefile.dist (1.70), iact.c (1.104), iact_full5.c (1.106): Fix broken C++ compilation of iact.c (necessary for LightEmission package). 2018-02-22 22:26 bernlohr * corsika/: Makefile.dist (1.69), iact.c (1.103), iact_full5.c (1.105): If CORSIKA is run without inputs cards, the IACT module should not segfault. 2018-02-22 22:07 bernlohr * param_comp/mk_param_evo.sh (1.6): Low-gain parameters belong to the unused ones on single-gain telescopes. 2018-02-22 20:54 bernlohr * cfg/CTA/CTA-PROD4-LST.cfg (1.6): Fixed typo. 2018-02-22 19:18 bernlohr * cfg/CTA/: CTA-PROD4-LST.cfg (1.5), CTA-PROD4-MST-FlashCam.cfg (1.8), CTA-PROD4-MST-NectarCam.cfg (1.5), CTA-PROD4-MST-optics.cfg (1.3), CTA-PROD4-SST-1M.cfg (1.6), CTA-PROD4-SST-ASTRI.cfg (1.6), CTA-PROD4-SST-GCT.cfg (1.6): Parameters updated. 2018-02-22 17:08 bernlohr * cfg/CTA/No7-10_ave.dat (1.1): LST window transmission, in order of increasing wavelength. 2018-02-22 12:34 bernlohr * corsika/: Makefile.dist (1.68), iact.c (1.102), iact_full5.c (1.104): Rotate lateral view images and histograms (North -> up). 2018-02-21 22:06 bernlohr * corsika/: README (1.78), README.tex (1.69), gd_image.c (1.4): Extended color scale only optional, not to be used by default. 2018-02-21 21:35 bernlohr * corsika/: Makefile.dist (1.67), README (1.77), README.tex (1.68), gd_image.c (1.3), mkbern.sh (1.1): Add a script useful for custom IACT/ATMO builds with non-standard options. Updated image generation interface. Distribute now with README.pdf rather than README.ps. 2018-02-21 20:46 bernlohr * corsika/: Makefile.dist (1.66), gen_config (1.18), iact.c (1.101), iact.h (1.8), iact_full5.c (1.103): Extend set of images and filled histograms with tracks of all charged particles (needs CORSIKA extra patch and IACTEXT option), build supporting COREAS (note: must drop TSTART and ARRANG inputs cards). 2018-02-20 19:51 bernlohr * common/sim_absorb.c (1.24): Fix problem with -DQE_WITH_RPOLATOR; optical_efficiency is optional, don't fill if NULL. 2018-02-20 19:50 bernlohr * util/Makefile (1.6, prod5): Fix warnings in 'make depend'. 2018-02-16 18:52 bernlohr * testeff.c (1.38), common/absorb.h (1.12), common/mc_aux.h (1.150), common/sim_absorb.c (1.23), common/sim_config.c (1.152), common/sim_histograms.c (1.25), common/sim_telarray.c (1.134): Separately keep track of optical efficiency if we want to measure the equivalent number of photons entering the camera. 2018-02-16 18:50 bernlohr * hess/Makefile.hess (1.186): Add multipipe_corsika template config files for prod-4 trigger tests. 2018-02-16 18:49 bernlohr * util/rpolist.c (1.3): Add option to show properties of a peak (in 1-d only). 2018-02-14 14:11 bernlohr * multi/: multi_cta-trg-test-prod4-LST1.cfg (1.1), multi_cta-trg-test-prod4-LST4.cfg (1.1), multi_cta-trg-test-prod4-MST1.cfg (1.1), multi_cta-trg-test-prod4-MST4.cfg (1.1), multi_cta-trg-test-prod4-SST1.cfg (1.1), multi_cta-trg-test-prod4-SST4.cfg (1.1) (utags: prod5, prod6beta1): Prepare files for future prod-4 trigger test runs- 2018-02-13 16:39 bernlohr * corsika/: iact.c (1.100), iact_full5.c (1.102): All HISTOGRAM code only for iact_full version. 2018-02-13 16:23 bernlohr * cfg/CTA/: CTA-PROD4-MST-FlashCam.cfg (1.7), CTA-PROD4-SST-GCT.cfg (1.5), pulse_CHEC-Sx.dat (1.1, prod6beta1, prod5): Set dummy discriminator_amplitude to zero for FlashCam. Prefer pulse shape with explicit time base for GCT, aiming to get rid of implied-time-step files. 2018-02-13 16:17 bernlohr * hess/sim_conv2hess.c (1.107), common/mc_aux.h (1.149), common/sim_histograms.c (1.24), common/sim_telarray.c (1.133): Add more histograms for trigger efficiency as a function of photons after atmospheric extinction. 2018-02-09 16:08 bernlohr * corsika/: Makefile.dist (1.65), iact.c (1.99), iact.h (1.7), iact_full5.c (1.101): More compile-time tests with more compilers and resulting warnings fixed - except for strdup/strcasecmp/setenv warnings when forcing any plain C standards ('-std=c99' or such). Forcing plain C90 (or older) will fail. 2018-02-08 19:13 bernlohr * corsika/: Makefile.dist (1.64), corsika.dox (1.29), iact.c (1.98), iact.h (1.6), iact_full5.c (1.100): More histograms with extended version, more compile-time checks, begin with function to check if a track segment has any chance of emitting photons into a detector (so far without any actual checks - but filling extra histograms; needs to be hooked into the CERENK subroutine in CORSIKA). 2018-02-06 16:33 bernlohr * cfg/CTA/: CTA-PROD4-MST-FlashCam.cfg (1.6), spe_R11920-MS_ap0.0002.dat (1.2, prod6beta1, prod5): FlashCam amplitude and DC coupling. 2018-02-06 16:30 bernlohr * common/mc_aux.h (1.148), common/sim_config.c (1.151), hess/sim_conv2hess.c (1.106): Add also pedestal maps to camera images. 2018-02-05 17:23 bernlohr * param_comp/mk_param_evo.sh (1.5): List those parameters separately that are not used with the trigger type(s) of the telescope type being processed. 2018-02-05 16:10 bernlohr * common/sim_signal.c (1.82): Fixing endless loop in pixel intialization (variable HG/LG ratio when there is no low-gain channel). 2018-02-05 15:32 bernlohr * doc_src/sim_hessarray.tex (1.74): Fix LaTeX errors in documentation. 2018-02-05 15:26 bernlohr * common/mc_aux.h (1.147), common/sim_config.c (1.150), common/sim_signal.c (1.81), doc_src/sim_hessarray.tex (1.73), hess/hess_defaults.h (1.109), hess/sim_conv2hess.c (1.105): Minor modification of transit time delay in pixels. Add electronic delay compensation (in adjustable time steps). Add more maps (time delay, gain, QE, relative NSB) to image file. 2018-01-30 16:08 bernlohr * p3eff.sh (1.11), cfg/CTA/CTA-PROD4-LST.cfg (1.4), cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.5), cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.4), cfg/CTA/CTA-PROD4-SCT.cfg (1.4), cfg/CTA/CTA-PROD4-SST-1M.cfg (1.5), cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.5), cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.4): NSB rates calculated for reference NSB level of 0.24 ph./(cm^2 ns sr) without referring to HESS-1. This is lower than the NSB level in the Benn&Ellison spectrum, which still results in lower pixel rates than estimated via HESS-1. 2018-01-26 17:24 bernlohr * p3eff.sh (1.10), testeff.c (1.37): Updated efficiency calculations. 2018-01-26 17:23 bernlohr * cfg/CTA/fake_astri_mirrorpos.dat (1.2, prod6beta1, prod5): Set larger diameter of virtual mirrors; does not matter for testeff calculations and not used anywhere else. 2018-01-26 17:05 bernlohr * cfg/common/Benn_LaPalma_sky_converted.lis (1.5, prod5): Updating some notes in the file after checking again with the Benn&Ellison paper and their Technical Note 115, plus the Preuss et al. paper. 2018-01-23 17:30 bernlohr * p3eff.sh (1.9), p3eff_all.sh (1.4, prod6beta1, prod5): Updated efficiency calculations. 2018-01-20 13:04 bernlohr * cfg/CTA/CTA-PROD4-SST-1M.cfg (1.4): Cleanup of SST-1M config and starting to work on trigger without shaping. 2018-01-20 13:03 bernlohr * cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.4): Use the 2-D reflection table with ASTRI but allow to turn it off. 2018-01-20 12:49 bernlohr * cfg/CTA/ref_astri-2d_2018-01-17.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.185): Add 2-D reflection table for ASTRI. 2018-01-19 16:32 bernlohr * generic_run.sh (1.38): Fixing typo in prod4-sst-1m config. 2018-01-15 20:04 bernlohr * param_comp/mk_param_evo.sh (1.4): The global parameters usually skippped unless using '-a' options now made to precede the individual telescope parameters. 2018-01-15 19:34 bernlohr * param_comp/mk_param_evo.sh (1.3): Mark parameters using default values or that have changed since prod-3b etc. 2018-01-12 17:54 bernlohr * param_comp/: astri_param_evo.sh (1.2), mk_astri_param_evo.sh (1.2), mk_param_comp.sh (1.2), mk_param_evo.sh (1.2), param_comp.sh (1.2): Can run the moved scripts from either top-level or param_comp sub-directory. 2018-01-12 17:17 bernlohr * param_comp/: astri_param_evo.sh (1.1), mk_astri_param_evo.sh (1.1), mk_param_comp.sh (1.1), mk_param_evo.sh (1.1), param_comp.sh (1.1): Add scripts again in sub-directory after deleting them from top directory. 2018-01-12 17:16 bernlohr * astri_param_evo.sh (1.5), mk_astri_param_evo.sh (1.5), mk_param_comp.sh (1.5), mk_param_evo.sh (1.2), param_comp.sh (1.5): Move to param_comp sub-directory. 2018-01-11 15:24 bernlohr * cfg/CTA/array_trigger_ultra6.dat (1.2): Remove empty unused file. 2018-01-10 00:21 bernlohr * astri_param_evo.sh (1.4), mk_astri_param_evo.sh (1.4), mk_param_comp.sh (1.4), mk_param_evo.sh (1.1), param_comp.sh (1.4): Add script for comparing the parameter evolution from early prod-3 through prod-3b and subsequent updates towards prod-4 configs. 2018-01-10 00:19 bernlohr * cfg/CTA/CTA-PROD4-Paranal-baseline.cfg (1.2): Just adding the same commented-out lines about NSB autoscaling as in La Palma config. 2018-01-09 13:32 bernlohr * corsika/: iact.c (1.97), iact_full5.c (1.99): Show output pipe options only in log if output is actually to a pipe. 2018-01-08 18:28 bernlohr * cfg/CTA/CTA-PROD4-LaPalma-baseline.cfg (1.2), common/sim_config.c (1.149), common/sim_signal.c (1.80), corsika/README (1.76), doc_src/sim_hessarray.tex (1.72), hess/hess_defaults.h (1.108): Add NSB_AUTOSCALE_AIRMASS configuration parameter. 2018-01-08 15:29 bernlohr * corsika/README.tex (1.67): Match actual file size in listing. 2018-01-06 18:17 bernlohr * multi/: multi_cta-prod3-demotest.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-demo.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-lapalma-baseline.cfg (1.1), multi_cta-prod4-lst.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-mst-fc.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-mst-nc.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-mst.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-paranal-baseline.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-sct.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-sst-1m.cfg (1.1), multi_cta-prod4-sst-astri.cfg (1.1), multi_cta-prod4-sst-gct.cfg (1.1, prod6beta1, prod5), multi_cta-prod4-sst.cfg (1.1), multi_dummy.cfg (1.1, prod6beta1, prod5), multi_phase2b1.cfg (1.1, prod6beta1, prod5): Add prod-4 multipipe_corsika configuration files (plus a couple others sitting around). 2018-01-06 18:12 bernlohr * cfg/CTA/Contributed/SCT/: Angular_response_MPPC_Prod3.dat (1.1), PDE_SiPM_Prod3.dat (1.1), PulseShape_MPPC_S10943_Shaped_CutOff350MHz_Prod3.dat (1.1), Pulse_Height_Hybrid2_Xtalk5per_norm_Prod3.dat (1.1), Reflectance_Prod3.dat (1.1), camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_Prod3.dat (1.1) (utags: prod5, prod6beta1): Contibuted and exported files that were not in CVS. 2018-01-06 14:47 bernlohr * sim_hessarray.dox (1.11), common/sim_signal.c (1.79): Array trigger desision gets delayed with hardstereo telescope groups but should not be forgotten. 2018-01-06 14:45 bernlohr * generic_run.sh (1.37): Add configurations for prod-4 baseline arrays and single telescope types. 2018-01-06 14:43 bernlohr * hess/Makefile.hess (1.184): Export additional prod-4-related files. 2018-01-06 14:42 bernlohr * cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.4): Fix removing left-over #endif line. 2018-01-06 14:41 bernlohr * cfg/CTA/CTA-PROD4-MST-optics.cfg (1.2): 86 mirrors is the default setup for now. 2018-01-06 14:39 bernlohr * corsika/: Makefile.dist (1.63), README (1.75), README.tex (1.66), corsika.dox (1.28), iact.c (1.96), iact_full5.c (1.98): Version 1.53 allows to pass command line options to the TELFIL pipe command. 2018-01-05 14:33 bernlohr * run_sim_hessarray_generic (1.4, prod5): Add a '-c cfgname' option, as supported by IACT/ATMO package version 1.53+, no longer needing symlinks for all possible configurations. 2018-01-04 16:12 bernlohr * cfg/CTA/array_trigger_prod4_lapalma_baseline.dat (1.2), cfg/CTA/array_trigger_prod4_paranal_baseline.dat (1.2, prod6beta1, prod5), common/mc_aux.h (1.146), common/sim_config.c (1.148), common/sim_signal.c (1.78), common/sim_telarray.c (1.132), hess/Makefile.hess (1.183): With hardware stereo flag in array trigger definition to disable readout of single telescopes that are only in hardware stereo groups. 2018-01-02 11:19 bernlohr * cfg/CTA/: CTA-PROD4-LaPalma-baseline.cfg (1.1), CTA-PROD4-Paranal-baseline.cfg (1.1), CTA-ULTRA6-LaPalma-baseline.cfg (1.4, prod6beta1, prod5), array_trigger_prod4_lapalma_baseline.dat (1.1), array_trigger_prod4_paranal_baseline.dat (1.1): More config files towards prod-4. 2017-12-25 18:36 bernlohr * cfg/CTA/CTA-PROD4-SCT.cfg (1.3): Amended from original prod-3 config file rather than including that. 2017-12-25 18:34 bernlohr * cfg/CTA/: camera_CTA-MST-FlashCam_patch3_digitalsum21_no_dead_pixel.dat (1.1), camera_CTA-MST-FlashCam_patch3_digitalsum3_no_dead_pixel.dat (1.1), camera_CTA-MST-FlashCam_patch3_digitalsum9_no_dead_pixel.dat (1.1) (utags: prod5, prod6beta1): Put some additional camera definition files (not normally used) under CVS, like their non-patch companions. 2017-12-25 18:30 bernlohr * cfg/CTA/LST_lightguide_eff.dat (1.2): Same file already used under name CTA-LST_lightguide_eff.dat 2017-12-22 16:52 bernlohr * cfg/CTA/CTA-PROD4-LST-prototype-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-LST-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-LST.cfg (1.3), cfg/CTA/CTA-PROD4-MST-FlashCam-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.3), cfg/CTA/CTA-PROD4-MST-NectarCam-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.3), cfg/CTA/CTA-PROD4-MST-optics.cfg (1.1), cfg/CTA/CTA-PROD4-SCT-prototype-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SCT-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-1M-prototype-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-1M-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-1M.cfg (1.3), cfg/CTA/CTA-PROD4-SST-ASTRI-prototype-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-ASTRI-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.3), cfg/CTA/CTA-PROD4-SST-GCT-prototype-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-GCT-prototype.cfg (1.3), cfg/CTA/CTA-PROD4-SST-GCT-v0.0.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.3), cfg/CTA/CTA-PROD4-common.cfg (1.1), cfg/CTA/CTA-PROD4-pmt.cfg (1.1), cfg/CTA/CTA-PROD4-sipm.cfg (1.1), cfg/CTA/CTA-PROD4-site.cfg (1.1), cfg/CTA/CTA-ULTRA6-LaPalma-baseline.cfg (1.3), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.15, prod6beta1, prod5), cfg/CTA/CTA-ULTRA6-Paranal-baseline.cfg (1.2, prod6beta1, prod5), cfg/CTA/array_trigger_ultra6_lapalma_baseline.dat (1.1, prod6beta1, prod5), cfg/CTA/array_trigger_ultra6_paranal_baseline.dat (1.1, prod6beta1, prod5), cfg/CTA/camera_CHEC-S_GCT.dat (1.1, prod6beta1, prod5), cfg/CTA/camera_CTA-MST-FlashCam_patch3_digitalsum9_neweff.dat (1.1), cfg/CTA/camera_CTA-MST-NectarCam_20171006.dat (1.2, prod6beta1, prod5), cfg/CTA/camera_CTA-MST-NectarCam_analogsum21_neweff.dat (1.1, prod6beta1, prod5), cfg/CTA/camera_CTA-MST-NectarCam_majority-3nn.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.182): Progress towards separate prod-4 configuration files (rather than just including prod-3 files). 2017-12-21 16:54 bernlohr * common/: absorb.h (1.11), mc_aux.h (1.145), sim_absorb.c (1.22), sim_config.c (1.147), sim_imaging.c (1.78), sim_telarray.c (1.131): Using rpolator and optional 2-D tables also for reflectivity. 2017-12-21 16:53 bernlohr * Mirrors/plot_mirrors.c (1.8): Print more significant digits for mirror area. 2017-12-21 16:52 bernlohr * p3eff.sh (1.8), p3eff_all.sh (1.3): With '-noref' option the reflectivity is not applied (corresponding to current CTA B-TEL-1170 requirement). p3eff_all.sh does both and puts all repetitive code in a function. 2017-12-21 16:49 bernlohr * testeff.c (1.36): Start with rpolator in testeff. Incomplete yet for 2-D tables, still needs parameters to tell at which angle each of them is to be evaluated. 2017-12-21 16:02 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.14, prod6beta1, prod5): Re-evaluated LST telescope_transmission factor. 2017-12-21 16:02 bernlohr * cfg/common/funnel_perfect.dat (1.2, prod6beta1, prod5): Equidistant is more efficient for rpolator. 2017-12-21 16:00 bernlohr * common/: rpolator.c (1.7), rpolator.h (1.5): Add function to set up 1-D interpolation tables directly from data in memory, without having to read a file (again). 2017-12-09 19:32 bernlohr * testeff.c (1.35): Size of array was actually MAX_WL rather than MAX_LAMBDA in testeff.c, even though both have currently the same value. 2017-12-09 18:56 bernlohr * testeff.c (1.34), common/absorb.h (1.10), common/mc_aux.h (1.144), common/sim_absorb.c (1.21), common/sim_config.c (1.146): No hard assumptions on the maximum wavelength supported when reading and processing the QE and reflectivity tables. 2017-12-09 18:19 bernlohr * common/absorb.h (1.9), common/mc_aux.h (1.143), common/sim_absorb.c (1.20), common/sim_config.c (1.145), common/sim_imaging.c (1.77), common/sim_telarray.c (1.130), hess/hess_defaults.h (1.107): WITH_BYBASS_OPTICS is now integral part and not optional any more. Fixing up EXTRA_CLOUD option where height of cloud from environment variable can now include a unit (km,m, or cm, default still km) while from the configuration parameter it is always meters (like site altitude). 2017-12-08 18:44 bernlohr * Cameras/showcam.gpl.sh (1.9): Revert testing modifications. 2017-12-08 18:38 bernlohr * p3eff.sh (1.7), Cameras/Makefile (1.6), Cameras/pixel_remap_trg.cc (1.1), Cameras/showcam.gpl.sh (1.8), cfg/CTA/camera_SST1M_DigiCam_21pix_patch.dat (1.1, prod6beta1, prod5), cfg/CTA/qe_SST1M_5477_ave.dat (1.1, prod6beta1, prod5), cfg/CTA/ref_SST1M_DOJLO15469.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.181): Configuration updates for SST-1M (still incomplete). 2017-12-07 18:33 bernlohr * astri_param_evo.sh (1.3), mk_astri_param_evo.sh (1.3), mk_param_comp.sh (1.3), param_comp.sh (1.3), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.14): Updates for configuration parameter comparisons. 2017-12-07 17:34 bernlohr * astri_param_evo.sh (1.2), mk_astri_param_evo.sh (1.2), cfg/CTA/CTA-PROD4-LST-prototype.cfg (1.2), cfg/CTA/CTA-PROD4-LST.cfg (1.2), cfg/CTA/CTA-PROD4-MST-FlashCam.cfg (1.2), cfg/CTA/CTA-PROD4-MST-NectarCam.cfg (1.2), cfg/CTA/CTA-PROD4-SCT-prototype.cfg (1.2, prod6beta1, prod5), cfg/CTA/CTA-PROD4-SCT.cfg (1.2), cfg/CTA/CTA-PROD4-SST-1M-prototype.cfg (1.2), cfg/CTA/CTA-PROD4-SST-1M.cfg (1.2), cfg/CTA/CTA-PROD4-SST-ASTRI-prototype.cfg (1.2), cfg/CTA/CTA-PROD4-SST-ASTRI.cfg (1.2), cfg/CTA/CTA-PROD4-SST-GCT-prototype.cfg (1.2), cfg/CTA/CTA-PROD4-SST-GCT.cfg (1.2): Main config file includes must use rather than "filename" syntax. 2017-12-07 16:12 bernlohr * sim_hessarray.dox (1.10), common/sim_telarray.c (1.129), doc_src/sim_hessarray.tex (1.71), hess/Makefile.hess (1.180): Documentation updates. 2017-12-06 18:27 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.21), common/rpolator.c (1.6), common/sim_telarray.c (1.128), hess/Makefile.hess (1.179): Working version of window transmission with 2-D table interpolation. 2017-12-05 22:12 bernlohr * common/sim_telarray.c (1.127): By mistake had reverted a change to the SHOW_MACRO macro. 2017-12-05 18:39 bernlohr * common/sim_telarray.c (1.126): Missing semicolon in conditional code. 2017-12-05 18:10 bernlohr * common/rpolator.c (1.5), common/rpolator.h (1.4), util/rpolist.c (1.2): Copyright notice and a little change to rpolist. 2017-12-05 18:09 bernlohr * hess/Makefile.hess (1.178): Include building the rpolist program. Export also preliminary prod4 configs. 2017-12-05 18:08 bernlohr * .cvsignore (1.3, prod5): Ignore a few more files 2017-12-05 18:07 bernlohr * multi/: multi_cta-prod3-mst.cfg (1.1), multi_cta-prod3-sst.cfg (1.1) (utags: prod5, prod6beta1): Multipipe configurations for trigger tests etc. not in CVS yet. 2017-12-05 16:58 bernlohr * cfg/CTA/: CTA-MST-lightguide_eff_FC-av.dat (1.1, prod6beta1, prod5), CTA-MST_lightguide_boost8_az-av_wl-av.dat (1.1, prod6beta1, prod5), CTA-MST_lightguide_eff_vs_lambda_averaged.dat (1.1, prod6beta1, prod5), CTA-ULTRA6-demotest.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-dsum-shaping-FlashCam-2a-int.dat (1.1, prod6beta1, prod5), astri_fast_shaper_ns-v4.dat (1.1, prod6beta1, prod5), astri_slow_shaper_ns-v4.dat (1.1, prod6beta1, prod5), camera_CTA-MST-NectarCam_20171006.dat (1.1), camera_SST1M_DigiCam_21pix.dat (1.1, prod6beta1, prod5), camera_SST1M_DigiCam_3pix.dat (1.1, prod6beta1, prod5): And more configuration data files which were not in CVS. 2017-12-05 16:31 bernlohr * gpl.txt (1.1, prod6beta1, prod5), cc-by-sa-4.0.txt (1.1, prod6beta1, prod5), lgpl-2.1.txt (1.1, prod6beta1, prod5), lgpl-3.txt (1.1, prod6beta1, prod5), switch_sim.sh (1.1), Cameras/scale_pix.c (1.1): Adding copyright documents and other little bits and pieces to CVS which are in the distribution but never made it into CVS. 2017-12-03 22:46 bernlohr * Cameras/showcam.gpl.sh (1.7): Also plot SST-1M with new camera definition. 2017-11-30 19:13 bernlohr * common/: sim_config.c (1.144), sim_telarray.c (1.125): Window transparency may be 1-D or 2-D. More testing needed. Reflectivity etc. to follow. 2017-11-30 19:11 bernlohr * common/rpolator.c (1.4), util/rpolist.c (1.1): Fix a few minor glitches in rpolator and add a utility to produce uniformly formated table listings suitable, for example, for gnuplot. Can also evaluate the resulting interpolation etc. 2017-11-30 19:08 bernlohr * cfg/CTA/transmission_astri_window_new.dat (1.2, prod6beta1, prod5): Convert to rpolator-suitable format. 2017-11-30 12:13 bernlohr * cfg/CTA/: CTA-PROD4-LST-prototype.cfg (1.1), CTA-PROD4-LST.cfg (1.1), CTA-PROD4-MST-FlashCam.cfg (1.1), CTA-PROD4-MST-NectarCam.cfg (1.1), CTA-PROD4-SCT-prototype.cfg (1.1), CTA-PROD4-SCT.cfg (1.1), CTA-PROD4-SST-1M-prototype.cfg (1.1), CTA-PROD4-SST-1M.cfg (1.1), CTA-PROD4-SST-ASTRI-prototype.cfg (1.1), CTA-PROD4-SST-ASTRI.cfg (1.1), CTA-PROD4-SST-GCT-prototype.cfg (1.1), CTA-PROD4-SST-GCT.cfg (1.1), CTA-ULTRA6-MST-FlashCam.cfg (1.18), CTA-ULTRA6-MST-NectarCam.cfg (1.13), CTA-ULTRA6-MST-optics.cfg (1.8, prod6beta1, prod5), CTA-ULTRA6-SST-DC.cfg (1.17, prod6beta1, prod5): Fix incomplete moving of MST camera body parameters into optics file. Include SST-1M parameters as presented by Rafal Moderski. Add very preliminary Prod-4 config files which fall back to the Prod-3 (ULTRA6) files after setting appropriate defines like POST_PROD3_UPDATES etc. 2017-11-26 15:17 bernlohr * common/: rpolator.c (1.3), rpolator.h (1.3): In addition to upper envelope along x axis build lower envelope as well. Add options for internal mapping to logarithmic units (user-provided/returned values are not in the logarithmic units but interpolation is done in the logarithmic units). 2017-11-26 14:57 bernlohr * common/mc_aux.h (1.142): Compiling with -DCTA_PROD4 results in limits consistent with baseline layouts. 2017-11-26 14:54 bernlohr * cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.12): NectarCam thresholds for high NSB level. 2017-11-26 14:53 bernlohr * util/corsika_autoinputs.cc (1.20): Auto-detection of CORSIKA programs with EPOS interaction model based on the real filename. Also changing the provided CORSIKA_PATH into the corresponding real pathname. 2017-11-24 16:41 bernlohr * multi/: multi_cta-prod3-demo.cfg (1.4), multi_cta-prod3-demo2.cfg (1.3), multi_cta-prod3-demo3.cfg (1.3), multi_cta-prod3-lapalma-baseline.cfg (1.2), multi_cta-prod3-lapalma3.cfg (1.3), multi_cta-prod3-lst.cfg (1.2), multi_cta-prod3-mst-fc.cfg (1.2), multi_cta-prod3-mst-nc.cfg (1.2), multi_cta-prod3-paranal-baseline.cfg (1.4), multi_cta-prod3-sct.cfg (1.2), multi_cta-prod3-sst-gct.cfg (1.2) (utags: prod5, prod6beta1): Make passing through the extra_defs environment variable the rule rather than the exception. 2017-11-16 18:44 bernlohr * common/mc_aux.h (1.141), common/rpolator.c (1.2), common/rpolator.h (1.2), common/sim_config.c (1.143), common/sim_imaging.c (1.76), common/sim_telarray.c (1.124), hess/sim_conv2hess.c (1.104): Getting close to first use of 2-D tables ... but still incomplete. 2017-11-16 18:43 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.20), CTA-ULTRA6-SST-DC.cfg (1.16): Just comments in config files. 2017-11-15 17:01 bernlohr * p3eff.sh (1.6): Wavelength and rotation-angle average new cone efficiency for MSTs. 2017-11-15 16:59 bernlohr * testeff.c (1.33), hess/Makefile.hess (1.177), common/mc_aux.h (1.140), common/rpolator.c (1.1), common/rpolator.h (1.1), common/sim_imaging.c (1.75): Interpolator code (with optional 1-D or 2-D) ready for use but not yet applied with sim_telarray. 2017-11-02 18:00 bernlohr * doc_src/sim_hessarray.tex (1.70): Describe columns of mirror list file. 2017-11-02 18:00 bernlohr * cfg/CTA/: mirror_CTA-100_prototype_90.dat (1.2), mirror_CTA-100_prototype_90_with_z.dat (1.2), mirror_CTA-100_prototype_90_with_zm.dat (1.1) (utags: prod5, prod6beta1): Drop the fake central mirror that had made it into the file. Variants without z coordinate (automatic), positive z coordinate (used as-given, without random error), and negative (with usual random errors applied). 2017-11-02 17:57 bernlohr * common/: mc_aux.h (1.139), sim_imaging.c (1.74), sim_telarray.c (1.123): Fixing inconsistent use of MAX_PIX_IN_TRG and MAX_DISC_IN_TRG and increase the corresponding limit to match MAX_PIXELS. 2017-10-23 19:24 bernlohr * Mirrors/plot_mirrors.c (1.7): Write descriptions of what the meaning of columns in the resulting data file. 2017-10-23 19:22 bernlohr * corsika/: README (1.74), README.tex (1.65): Minor documentation update. 2017-10-23 19:21 bernlohr * hess/Makefile.hess (1.176): Export also MST mirror configurations with larger gaps. 2017-10-23 19:19 bernlohr * cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.17): Trigger thresholds also for a range of digital sum lower thresholds. 2017-10-23 18:57 bernlohr * cfg/CTA/CTA-ULTRA6-MST-optics.cfg (1.7): Use mirror configurations with larger gaps for POST_PROD3_UPDATES. Minimal change in focus_offset. Try to account for estimate of what shadowing structures are not yet accounted for in detailed ray-tracing. 2017-10-18 16:18 bernlohr * cfg/CTA/: mirror_CTA-100_1.20-84-0.04.dat (1.1), mirror_CTA-100_1.20-86-0.04.dat (1.1), mirror_CTA-100_1.20-88-0.04.dat (1.1), mirror_CTA-100_1.20-90-0.04.dat (1.1), mirror_CTA-100_prototype_90.dat (1.1), mirror_CTA-100_prototype_90_with_z.dat (1.1): Regenerated MST mirror list files with actual gap size and mirror list files with coordinates provided by CAD/FEM. 2017-10-17 18:29 bernlohr * cfg/CTA/CTA-ULTRA6-MST-optics.cfg (1.6): Update MST telescope transmission (extra shadowing) and focus offset. 2017-10-16 18:54 bernlohr * util/corsika_autoinputs.cc (1.19): Following the all-inputs-epos example a bit closer, setting the other input filenames to 'none'. 2017-10-16 17:00 bernlohr * util/corsika_autoinputs.cc (1.18): More changes needed to get it to work with EPOS. 2017-10-16 14:31 bernlohr * util/corsika_autoinputs.cc (1.17): Create symlinks for EPOS cross section files, even if only available in the CORSIKA 'epos' directory rather than the 'run' directory. 2017-10-12 16:18 bernlohr * sim_hessarray.dox (1.9), doc_src/sim_hessarray.tex (1.69): Documentation date updated. 2017-10-12 15:50 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.13): Optional bigger camera body shadow including the mounting frame, going together with a smaller fraction of other shadowing losses. 2017-10-12 15:48 bernlohr * p3eff.sh (1.5): Allow restricting wavelength range on command line. 2017-10-12 15:47 bernlohr * cfg/hess2/hess2_ct5fc.cfg (1.2): Different order of includes to keep in sync with FlashCam config updates. 2017-10-12 15:45 bernlohr * hess/hess_defaults.h (1.106), common/mc_aux.h (1.138), common/sim_config.c (1.142), common/sim_imaging.c (1.73), doc_src/sim_hessarray.tex (1.68): Add optional second Gaussian component of random reflection angle. 2017-10-10 20:38 bernlohr * Cameras/showcam.gpl.sh (1.6): Add revised NectarCam pixel ordering. 2017-10-02 19:38 bernlohr * corsika/: Makefile.dist (1.62), README (1.73), README.tex (1.64), corsika.dox (1.27), iact.c (1.95), iact_full5.c (1.97): Update version to 1.52 although there are no big changes. 2017-10-02 19:12 bernlohr * corsika/: corsika.dox (1.26), gen_config (1.17): Starting support for CORSIKA 7.6x00 2017-10-02 16:26 bernlohr * common/sim_config.c (1.141), hess/hess_defaults.h (1.105), doc_src/sim_hessarray.tex (1.67): Add experimental zenith angle dependence of focus offset. 2017-10-01 14:28 bernlohr * doc_src/sim_hessarray.tex (1.66): A fe more little changes. 2017-09-30 20:20 bernlohr * doc_src/sim_hessarray.tex (1.65): Add section on tools for CORSIKA data. 2017-09-29 21:38 bernlohr * cfg/CTA/CTA-ULTRA6-pmt.cfg (1.6, prod6beta1, prod5): Update of a few minor parameters after NectarCam discussions. 2017-09-29 17:26 bernlohr * cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.15): Adding comments on upcoming parameter changes which are not activated right away to avoid re-evaluation of clipping and thresholds. 2017-09-28 21:38 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.19): Fix typo in ASTRI configuration file. 2017-09-28 19:28 bernlohr * hess/sim_conv2hess.c (1.103): Just adding the used eventio version as well to the run header target. 2017-09-28 19:09 bernlohr * hess/sim_conv2hess.c (1.102): Include sim_telarray version and release strings in target variable of run header data block. 2017-09-28 18:25 bernlohr * p3eff.sh (1.4), p3eff_all.sh (1.2): Covering more configuration options, also including older ones. 2017-09-28 18:20 bernlohr * hess/Makefile.hess (1.175): Export also newer ASTRI configuration data files. 2017-09-28 18:20 bernlohr * multi/multi_cta-prod3-paranal-baseline.cfg (1.3): Remove forcing zstd compression again. 2017-09-28 18:12 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.18), astri_M1_segments_2017-06.dat (1.1, prod6beta1, prod5), ref_astri_2017-06_T0.dat (1.1, prod6beta1, prod5), transmission_astri_window_average.dat (1.2, prod6beta1, prod5), transmission_astri_window_new.dat (1.1): Updating ASTRI v5 configuration parameters and data files, still subject to change. 2017-09-27 16:59 bernlohr * hess/hess_defaults.h (1.104), common/mc_aux.h (1.137), common/sim_config.c (1.140), common/sim_signal.c (1.77), common/sim_telarray.c (1.122): The optional extra cloud layer setup can now also be configured through the normal configuration files instead of through environment variables. 2017-09-27 16:56 bernlohr * p3eff.sh (1.3): Add prod-1 MST for comparison. 2017-09-27 16:55 bernlohr * generic_run.sh (1.36): Allow overriding the .gz extension on output files (implying gzip compression) by other extensions (compression schemes). 2017-09-27 16:53 bernlohr * Mirrors/plot_mirrors.c (1.6): More parameters to tweak from which sides or corners to omit mirrors. 2017-09-27 16:52 bernlohr * LightEmission/Makefile (1.8): Filter out C-specific options from CXXFLAGS. 2017-09-27 16:50 bernlohr * hess/Makefile.hess (1.174), cfg/CTA/CTA-ULTRA6-MST-optics.cfg (1.5), cfg/CTA/mirror_CTA-100_1.20-84-0.02.dat (1.2), cfg/CTA/mirror_CTA-100_1.20-86-0.02.dat (1.1), cfg/CTA/mirror_CTA-100_1.20-88-0.02.dat (1.2), cfg/CTA/mirror_CTA-100_1.20-90-0.02.dat (1.1): Allow 86, 88, and 90 MST mirror alternatives to the 84 mirror prod3 configuration. 2017-09-27 11:33 bernlohr * util/multipipe_corsika.c (1.19): Allow reading input from a file rather than standard input. 2017-09-25 10:30 bernlohr * cfg/hess2/hess2_ct5fc.cfg (1.1): FlashCam on HESS CT5. 2017-09-22 19:12 bernlohr * Cameras/: fov.cc (1.6), showcam.gpl.sh (1.5): Fixing the showcam plot with rotated 2M cameras and optionally superposing the module IDs at the cog position of its pixels. 2017-09-22 19:10 bernlohr * cfg/CTA/: camera-astri-smart4-v4.dat (1.2), camera-astri-smart4-v5.dat (1.3), camera-astri-smart5-v4.dat (1.2), camera-astri-smart5-v5.dat (1.3) (utags: prod5, prod6beta1): ASTRI camera rotated by -90 degrees in versions 4 and 5 but leaving prod3(b) as it was. 2017-09-20 13:17 bernlohr * cfg/CTA/: CTA-ULTRA6-MST-FlashCam.cfg (1.16), CTA-ULTRA6-MST-NectarCam.cfg (1.11), CTA-ULTRA6-MST-optics.cfg (1.4): Moved square camera body definition into MST optics config file. 2017-09-01 13:25 bernlohr * common/mc_aux.h (1.136), common/sim_config.c (1.139), common/sim_telarray.c (1.121), hess/hess_defaults.h (1.103): Min_photons and min_photoelectrons should be in the telescope-specific configuration section and not global. 2017-09-01 12:35 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.12), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.15), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.14), multi/multi_cta-prod3-paranal-baseline.cfg (1.2): Include thresholds for nigher NSB levels and configure the Paranal baseline multipipe_corsika configuration to run with 1x, 5x, and 30x in parallel. 2017-08-31 16:41 bernlohr * cfg/CTA/camera_SST1M_DigiCam_7pix_dsum.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.173), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.13): Since the SmartPixel '+' notation does no longer work with DigitalSum trigger, adding a variant camera configuration without the '+'. 2017-08-30 18:17 bernlohr * common/sim_signal.c (1.76), hess/Makefile.hess (1.172): Also export the preliminary ASTRI v5 camera configuration files. 2017-08-30 18:16 bernlohr * cfg/CTA/: camera-astri-smart4-v5.dat (1.2), camera-astri-smart5-v5.dat (1.2): Fix type in name of dummy (perfect) funnel efficiency file. 2017-08-30 18:14 bernlohr * cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.12), common/sim_config.c (1.138), hess/hess_defaults.h (1.102), doc_src/sim_hessarray.tex (1.64): Add parameter that tells the NSB level at which SiPM cameras have their gain dropping to half the nominal value. Applied for SST-1M so far. 2017-08-23 16:54 bernlohr * common/: sim_config.c (1.137), sim_telarray.c (1.120): Tell the preprocessor if digital sum trigger pulse processing is done in double processor or in integer since the threshold values to be applied will depend on it. 2017-08-23 13:26 bernlohr * common/sim_config.c (1.136), hess/Makefile.hess (1.171), hess/hess_defaults.h (1.101): DSUM_THRESHOLD parameter again a real number for compatibility with the NSB random rates utilities. Include the 'integer' not-normalized digital sum shaping kernel for more accurate FlashCam FPGA emulation in the distribution. Failing to load a configured shaping should be fatal. 2017-08-22 16:02 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.17), CTA-ULTRA6-SST-DC.cfg (1.11), CTA-ULTRA6-SST-GCT-S.cfg (1.12, prod6beta1, prod5): Take over changes by Orel (some default values made explicit and all parameter names followed by equal sign) for the sake of report generation in the MC verification process. 2017-08-22 15:38 bernlohr * astri_param_evo.sh (1.1), mk_astri_param_evo.sh (1.1): Like param_comp but showing the evolution of ASTRI simulation parameters through the versions. 2017-08-22 15:37 bernlohr * mk_param_comp.sh (1.2), param_comp.sh (1.2): Add a 'latest' option to show the latest set of post-prod3 parameters (for now). 2017-08-21 15:54 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.16), hess/Makefile.hess (1.170): Re-arranging a few lines in ASTRI configuration, exporting preprocessor test file pfp.check. 2017-08-21 15:41 bernlohr * corsika/: iact.c (1.94), iact_full5.c (1.96): Typedef of cors_dbl_t both in atmo.h and iact.c is a problem with older compilers. Make sure it gets typedefed only once. 2017-08-21 15:16 bernlohr * util/pfp.check (1.2, prod6beta1, prod5): Extend pfp test cases and formulate them such that they are consistent with the C preprocessor ("gcc -E" actually). 2017-08-18 17:47 bernlohr * util/: pfp.c (1.9), tree.c (1.4), tree.h (1.5): Get rid of remaining compiler warnings. 2017-08-18 17:12 bernlohr * p3eff.sh (1.2), Cameras/showcam.gpl.sh (1.4): Update some utility scripts. 2017-08-18 17:10 bernlohr * cfg/common/filter_perfect.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.169), cfg/common/funnel_perfect.dat (1.1): More files to be exported. 2017-08-18 16:50 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.15), camera-astri-smart4-v5.dat (1.1), camera-astri-smart5-v5.dat (1.1), transmission_astri_window.dat (1.1, prod6beta1, prod5), transmission_astri_window_average.dat (1.1), transmission_astri_window_extended.dat (1.1, prod6beta1, prod5): Starting ASTRI version 5 configuration - even though version 4 is not complete yet. 2017-08-18 16:49 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI+CHEC-S.cfg (1.1, prod6beta1, prod5): Epxerimental configuration for a CHEC-S camera in an ASTRI telescope. 2017-08-18 14:55 bernlohr * util/: pfp.c (1.8), pfp.check (1.1): Extend preprocessor with defined() and undefined() functions and negation! Running "pfp - < pfp.check | egrep 'oops|statement' | wc -l" should report "0". All checks reported should end in "(OK)". Made to fail with older pfp versions. 2017-08-07 17:07 bernlohr * cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.14), common/sim_config.c (1.135), common/sim_signal.c (1.75), doc_src/sim_hessarray.tex (1.63), hess/hess_defaults.h (1.100): Updating digital sum trigger enhancements; documenting new configuration parameters. 2017-08-04 20:37 bernlohr * cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.13), cfg/CTA/CTA-ULTRA6-common.cfg (1.6, prod6beta1, prod5), common/mc_aux.h (1.135), common/sim_config.c (1.134), common/sim_imaging.c (1.72), common/sim_signal.c (1.74), hess/hess_defaults.h (1.99): First version with scaling and patch-wise pre-summation for FlashCam. Old configurations may result in slightly different digital sum trigger behaviour due to intermediate conversion of shaped traces to integer values and ignoring the leading and trailing samples now. 2017-08-04 14:14 bernlohr * cfg/CTA/transmission_lst_window_No7-10_ave.dat (1.1), hess/Makefile.hess (1.168): Updated LST camera window transmission (for vertical incidence so far). 2017-08-04 13:59 bernlohr * hess/Makefile.hess (1.167): Also export new FlashCam configuration files and the dsum_patchify program used to convert them. 2017-08-04 13:54 bernlohr * Cameras/: Makefile (1.5), dsum_patchify.cc (1.1): Add the dsum_patchify program to convert DigitalSumTrigger lines in camera configuration files from plain to 'patchified' format. Most of the code and the Makefile rules are from fov.cc. 2017-08-04 13:40 bernlohr * cfg/CTA/: camera_CTA-MST-FlashCam_digitalsum21.dat (1.2), camera_CTA-MST-FlashCam_digitalsum21_no_dead_pixel.dat (1.1), camera_CTA-MST-FlashCam_digitalsum3.dat (1.2), camera_CTA-MST-FlashCam_digitalsum3_no_dead_pixel.dat (1.1), camera_CTA-MST-FlashCam_digitalsum9.dat (1.2), camera_CTA-MST-FlashCam_digitalsum9_no_dead_pixel.dat (1.1), camera_CTA-MST-FlashCam_patch3_digitalsum21.dat (1.1), camera_CTA-MST-FlashCam_patch3_digitalsum3.dat (1.1), camera_CTA-MST-FlashCam_patch3_digitalsum9.dat (1.1) (utags: prod5, prod6beta1): The 'no_dead_pixels' files are now the basis for revised FlashCam configuration files. While these include in DigitalSumTrigger lines also the disabled pixels (three pixel positions for holding the camera window and three in upper and lower corners shadowed by the window frame), with the three pixels in a patch always following another, the configuration files to be actually used have these pixels ignored in the trigger. Disabling these pixels and optionally converting from the plain DigitalSumTrigger format to the patchified version ("1[2,3]") is done with the dsum_patchify program. 2017-08-04 13:32 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.14): Incomplete update of ASTRI parameters; recording current status. 2017-08-02 09:31 bernlohr * util/pfp.c (1.7): Get rid of compiler warning about unused variable. 2017-08-01 21:38 bernlohr * hess/Makefile.hess (1.166): Pass compiler flags down to util sub-make. 2017-08-01 21:35 bernlohr * util/: getword.c (1.3, prod6beta1, prod5), pfp.c (1.6): Expand processing of '#if' and '#elif' lines to include simple combinations of logical sub-expressions, without proper precedence of '&&' over '||'. No arithmetic expressions, as it used to be. Don't expect too much from it. 2017-07-24 17:11 bernlohr * doc_src/sim_hessarray.tex (1.62): Minor documentation updates. 2017-07-24 17:10 bernlohr * cfg/CTA/: camera-astri-smart4-v4.dat (1.1), camera-astri-smart5-v4.dat (1.1): Updated ASTRI camera configuration files (mainly fixing pixel positions). 2017-07-24 17:09 bernlohr * cfg/CTA/: camera_CTA-MST-FlashCam_digitalsum3.dat (1.1), camera_CTA-MST-FlashCam_digitalsum21.dat (1.1), camera_CTA-MST-FlashCam_digitalsum9.dat (1.1): Updated FlashCam camera configuration files with different trigger group sizes. 2017-07-24 16:44 bernlohr * LightEmission/fake-muon.cc (1.3): Scattering angle and scattering displacement are highly correlated but not a 100%. Follow formulae by PDG also in that correlation. 2017-07-20 18:08 bernlohr * corsika/: Makefile.dist (1.61), corsika.dox (1.25), iact.c (1.93), iact.h (1.5), iact_full5.c (1.95): Add a function to report a system displacement - not used with CORSIKA but only with the artificial light sources package. Allow density profiles given by name - but be aware that the file name is not properly recorded and there may be resulting problems in the telescope simulation. Add new IACT input card options that work as more easily readable alternatives to the numbers behind the TELFIL parameter. Starting new version 1.51. 2017-07-20 17:59 bernlohr * corsika/: atmo.c (1.20), atmo.h (1.7): Atmospheric profiles can now also be loaded by name instead of number. Start looking into upward light propagation (but don't count on it!). 2017-07-20 17:52 bernlohr * LightEmission/: IactLightEmission.cc (1.5), IactLightEmission.hh (1.5), Makefile (1.7), fake-muon.cc (1.2): Extending fake-muon program for optional density profile and multiple scattering. Also extending underlying IactLightEmission; should also fix applying atmospheric refraction for artificial light sources. 2017-06-13 15:45 bernlohr * LightEmission/fake-muon.cc (1.1): Add an example program producing idealized muon rings. 2017-06-09 20:45 bernlohr * util/corsika_autoinputs.cc (1.16): A little further change to the CERFIL line in case it is not 'CERFIL F'. 2017-06-09 14:03 bernlohr * util/corsika_autoinputs.cc (1.15): Corsika 7.570 needs a change for the CERFIL input card. 2017-05-22 14:30 bernlohr * hess/Makefile.hess (1.165): Include alternate rotation version of LST camera definition in distribution. 2017-05-22 14:23 bernlohr * cfg/common/atm_trans_2180_1_10_0_0_0.dat (1.1, prod6beta1, prod5): Atmospheric transmission file for La Palma array center. 2017-05-22 13:56 bernlohr * cfg/CTA/array_trigger_ultra6_lapalma3_nosct.dat (1.1, prod6beta1, prod5): An alternate LaPalma prod3 array trigger definition that was not committed to CVS so far. 2017-05-22 13:49 bernlohr * cfg/CTA/camera_CTA-LST_alt_analogsum21.dat (1.1, prod6beta1, prod5): Add alternate LST camera configuration which only requires a 10.893 degrees rotation angle rather than 100.893 degrees. 2017-05-22 13:46 bernlohr * Cameras/: Makefile (1.4), modular_camera.cc (1.7), showcam.gpl.sh (1.3): The modular camera definition generated with the SevenHexVertPixelGenerator is now the same as that generated with SevenHexHoriPixelGenerator and rotated by 90 degrees (was flipped before). 2017-05-19 16:00 bernlohr * LightEmission/Doxyfile (1.2): Version date in documentation. 2017-05-19 15:34 bernlohr * common/sim_config.c (1.133), common/sim_telarray.c (1.119), util/pfp.c (1.5), util/tree.c (1.3), util/tree.h (1.4): Get rid of some compiler warnings, mainly when compiling with C++ compiler. Note that compilation with strict ANSI C (without _POSIX_SOURCE or GNU extensions) will not work. 2017-05-19 15:32 bernlohr * corsika/atmo.c (1.19): Strict ANSI C does not define M_PI, so be prepared to do it ourselves. 2017-05-19 14:42 bernlohr * common/mc_aux.h (1.134), common/sim_config.c (1.132), common/sim_imaging.c (1.71), common/sim_telarray.c (1.118), hess/hess_defaults.h (1.98), hess/sim_conv2hess.c (1.101): Review (with more debugging output) and confirm the camera coordinate systems. Completely drop the 'front_view' parameter as it only leads to confusion. 2017-05-19 14:39 bernlohr * LightEmission/: IactLightEmission.cc (1.4), IactLightEmission.hh (1.4): Add more LightSource features (more pre-configured angular distributions, source length and speed, ...). 2017-05-19 14:35 bernlohr * Mirrors/conical_taylor.cc (1.2, prod5): Add '-a' option to add additional polynomial coefficients together with the circle/ellipse/parabola/hyperbola expansion. 2017-05-19 14:31 bernlohr * Cameras/: fov.cc (1.5), showcam.gpl.sh (1.2): Try to make sure that cameras are drawn as you would see them when standing in front of the photosensor side. 2017-05-19 14:29 bernlohr * Cameras/: drawdrawers.cc (1.3), hesspix.c (1.2): Get rid of compiler warnings about old 'char *text = "abc"' usage. 2017-05-19 14:27 bernlohr * hess/Makefile.hess (1.164), Cameras/Makefile (1.3), LightEmission/Makefile (1.6), Mirrors/Makefile (1.1), util/Makefile (1.5): Update Makefiles in sub-directories, build LightEmission by default (while targets in Cameras and Mirrors are not built by default). A 'make clean' decends into Cameras and Mirrors though. 2017-04-19 13:45 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.11), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.12), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.10), cfg/CTA/mirror_CTA-LST-flen_grouped.dat (1.1), hess/Makefile.hess (1.163): Start POST_PROD3_UPDATES parameter updates at the end of configuration files. Set square camera bodies for LSTs and MSTs, and also set new 3-zone (sorted focal length) mirror configuration for LSTs. All operational only with sim_telarray is run with -DPOST_PROD3_UPDATES. 2017-04-19 13:40 bernlohr * common/mc_aux.h (1.133), hess/hess_defaults.h (1.97), common/sim_config.c (1.131), common/sim_imaging.c (1.70): Configurable shape type of camera body for shadowing (as for pixels and mirror facets). Allow for truncated Gaussian or flat distribution of mirror facet focal lengths. 2017-04-12 17:44 bernlohr * common/mc_aux.h (1.132), common/sim_config.c (1.130), common/sim_imaging.c (1.69), doc_src/sim_hessarray.tex (1.61), hess/hess_defaults.h (1.96): Allow for square and hexagonal camera bodies in shadowing. 2017-04-12 17:43 bernlohr * hess/Makefile.hess (1.162): Check for presence of included Makefile additions with HESSROOT defined. 2017-04-06 14:44 bernlohr * cfg/hess/atm_trans_1800_1_10_0_0_1800_mod5.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.161): Also include Modtran 5 generated transmission table for the 1800 m altitude used in older HESS simulations. 2017-04-05 15:40 bernlohr * hess/Makefile.hess (1.160): Include MODTRAN 5 computed variant of HESS transmission table to exported set of configuration files. 2017-04-05 15:38 bernlohr * cfg/hess/atm_trans_1835_1_10_0_0_1835_mod5.dat (1.1, prod6beta1, prod5): Add an extinction table computed with a more modern version of MODTRAN. 2017-03-31 13:14 bernlohr * mk_param_comp.sh (1.1), p3eff.sh (1.1), p3eff_all.sh (1.1), param_comp.sh (1.1): Put scripts used in prod-3 parameter comparison under CVS. 2017-03-31 13:12 bernlohr * hess/Makefile.hess (1.159): Export new MST cone efficiency tables. 2017-03-31 13:07 bernlohr * cfg/CTA/: CTA-MST_lightguideAlu_eff.dat (1.2), CTA-MST_lightguideBoost_eff.dat (1.2) (utags: prod5, prod6beta1): Commenting out an empty line which testeff did not like. 2017-03-30 13:57 bernlohr * cfg/CTA/contributions.txt (1.2, prod6beta1, prod5): Typo. 2017-03-30 13:56 bernlohr * cfg/CTA/: CTA-MST_lightguideAlu_eff.dat (1.1), CTA-MST_lightguideBoost_eff.dat (1.1), contributions.txt (1.1): MST lightguide efficiency tables contributed by POP. 2017-03-23 14:47 bernlohr * corsika/: corsika_build_script (1.10, prod5), gen_config (1.16): Also pass down option to activate IACT_NO_GRID definition. 2017-03-23 14:02 bernlohr * corsika/: corsika_build_script (1.9), gen_config (1.15): Passing down additional options to enable the STORE_EMITTER or MARK_DIRECT_LIGHT definitions in the IACT interface together with their IACTEXT etc. dependencies. 2017-03-21 16:06 bernlohr * Cameras/Makefile (1.2): Fix dependencies for compiling the fov and drawdrawers programs. 2017-03-21 15:59 bernlohr * common/sim_telarray.c (1.117): For the first event in a run print if CORSIKA was supposed to start particle tracking when entering the atmosphere (TSTART on) or after the first interaction (TSTART off). Except for the CORSIKA inputs history block, this information is not preserved since 2004. 2017-03-19 20:27 bernlohr * Mirrors/draw_mirrors.c (1.9): Comment out lines with debugging output. 2017-03-19 15:12 bernlohr * Cameras/fov.cc (1.4): Remove unnecessary includes. 2017-03-19 15:12 bernlohr * Cameras/modular_camera.cc (1.6): Add variants for sixteen-pixel groups. 2017-03-18 18:56 bernlohr * Mirrors/draw_mirrors.c (1.8): Fix drawing of square mirrors. 2017-03-15 20:23 bernlohr * common/mc_aux.h (1.131), common/sim_signal.c (1.73), doc_src/sim_hessarray.tex (1.60), hess/hess_defaults.h (1.95): Negative values of DISCRIMINATOR_GATE_LENGTH indicate true discriminator type gates while positive, as it has always been, indicate updating types (including comparator and updating discriminator). Debugging output for trigger internal pulses and logic values now with a description line for many but not all outputs. 2017-03-15 20:16 bernlohr * hess/Makefile.hess (1.158), cfg/CTA/camera_7pixel.cfg (1.1, prod6beta1, prod5), cfg/CTA/camera_7pixel.dat (1.1, prod6beta1, prod5), cfg/CTA/camera_7pixel_1trg.dat (1.1, prod6beta1, prod5), cfg/common/camera_7pixel.dat (1.2): Complete configuration for a very small camera with just seven pixels and one drawer/cluster/trigger group, suitable for example for illustrating the evolution of internal pulse and logic signals when sim_telarray is compiled with definitions like -DDEBUG_PULSE_SHAPES -DDEBUG_TRIGGER -DTRIGGER_DISPLAY 2017-03-14 17:20 bernlohr * generic_run.sh (1.35): Easier application of the generic_run.sh script to CORSIKA files on disk, with automatic setup of the usual CORSIKA_... environment variables. 2017-03-14 14:24 bernlohr * cfg/CTA/CTA-ULTRA6-LaPalma-baseline.cfg (1.2): La Palma baseline configuration now optionally with Prod-2 setup. 2017-02-21 19:12 bernlohr * cfg/CTA/CTA-ULTRA6-LaPalma-baseline.cfg (1.1), cfg/CTA/CTA-ULTRA6-Paranal-baseline.cfg (1.1), hess/Makefile.hess (1.157), multi/multi_cta-prod3-lapalma-baseline.cfg (1.1), multi/multi_cta-prod3-paranal-baseline.cfg (1.1): Add configurations for baseline layouts on La Palma and at Paranal. 2017-02-16 18:09 bernlohr * doc_src/sim_hessarray.tex (1.59): Fix documentation of ASUM_OFFSET and DSUM_OFFSET parameters. 2017-02-16 18:03 bernlohr * common/sim_config.c (1.129): The DSUM_IGNORE_BELOW configuration parameter was lost in the setup. 2017-02-16 17:25 bernlohr * sim_hessarray.dox (1.8), doc_src/sim_hessarray.tex (1.58), doc_src/fig/cta-cameras.eps (1.1, prod6beta1, prod5), doc_src/fig/cta-cameras.pdf (1.1, prod6beta1, prod5): Documentation changes. 2017-02-16 17:24 bernlohr * common/mc_aux.h (1.130): Cover all possible DISC_BITS_... preprocessor definitions before defining the default DISC_BITS_4. 2017-02-16 17:20 bernlohr * LightEmission/ff-1m.cc (1.4): Add command line option to set camera fiducial radius. 2017-02-10 16:21 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.13), cfg/CTA/astri_slow_shaper_50ns_x_shifted30.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.156), hess/hess_defaults.h (1.94): Shifting ASTRI "FADC" pulse shape and narrowing peak search window for more realistic response. Only used with -DASTRI_V3. 2017-01-23 17:13 bernlohr * cfg/CTA/: CTA-ULTRA6-LaPalma3.cfg (1.5, prod6beta1, prod5), CTA-ULTRA6-SCT.cfg (1.10, prod6beta1, prod5), CTA-ULTRA6-SST-GCT.cfg (1.6, prod6beta1, prod5), CTA-ULTRA6-common.cfg (1.5): Fixing prod-3(b) La Palma configuration without SCTs. 2017-01-22 22:43 bernlohr * cfg/CTA/CTA-ULTRA6-LaPalma3.cfg (1.4), cfg/CTA/CTA-ULTRA6-SCT.cfg (1.9), cfg/CTA/array_trigger_ultra6_lapalma3.dat (1.4, prod6beta1, prod5), cfg/common/ref_black.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.155): Different possibilities for the La Palma prod3b simulations without the SCTs: not including them, ignoring them, or disabling the telescopes through zero optical efficiency. 2017-01-09 13:46 bernlohr * common/sim_telarray.c (1.116), hess/sim_conv2hess.c (1.100): Fixing a bug with the I/O buffer not written out when there were photo-electrons recorded for the last event but there was no trigger (and no "Event" data recorded) that would lead to the missing histogram block at the very end, and actually also the photo-electrons for the non-triggered event right before that. Whether this is now fixing all cases of the missing histogram block has to be seen ... 2017-01-05 16:53 bernlohr * common/sim_telarray.c (1.115), hess/sim_conv2hess.c (1.99): Yet another attempt to avoid occasional loss of the trailing histogram block in the output data file. Also slight change of what happens after getting too many photo-electrons. 2017-01-05 16:50 bernlohr * hess/Makefile.hess (1.154): Adapt version file processing to handle conditional preprocessing; clean target should also remove pfp program. 2016-12-13 16:12 bernlohr * cfg/CTA/CTA-ULTRA6-LaPalma3.cfg (1.3): Fix telescope number limit for extra SCTs. 2016-12-13 15:22 bernlohr * cfg/CTA/: CTA-ULTRA6-LaPalma3.cfg (1.2), array_trigger_ultra6_lapalma3.dat (1.3): Add another 3*5 MST positions for new La Palma simulations. 2016-12-09 15:23 bernlohr * common/sim_config.c (1.128): Missing telescope-specific QE or reflectivity tables should better cause a 'Setup not complete' error exit. 2016-12-01 13:16 bernlohr * testeff.c (1.32): Fix typo which was discovered by Ciro: (iwl+05) -> (iwl+0.5) 2016-11-29 13:24 bernlohr * cfg/CTA/array_trigger_ultra6_lapalma3.dat (1.2): Allow mono triggers for the respective LST-1 telescope in either LST array for tests. 2016-11-23 13:13 bernlohr * common/sim_telarray.c (1.114): Report batch job number etc., if available, for more conveniently finding corresponding batch system log files. 2016-11-22 17:28 bernlohr * hess/Makefile.hess (1.153): Fix filename typo. 2016-11-22 17:26 bernlohr * hess/Makefile.hess (1.152): Export a few more of the Cameras and Mirrors utilities plus Makefiles. 2016-11-22 17:10 bernlohr * Cameras/: Makefile (1.1), fov.cc (1.3): Show program syntax in fov; add Makefile to build programs. 2016-11-22 16:35 bernlohr * Cameras/fov.cc (1.2): Pixel filling factor was reported as inverse. More conservative full coverage radius based on topological edge pixels for cameras with square pixels. 2016-11-21 14:10 bernlohr * multi/multi_cta-prod3-lapalma3.cfg (1.2): Not forcing the configuration switch to 'lp-all' by default since the production should be started with a suitable variant anyway. 2016-11-21 13:58 bernlohr * sim_hessarray.dox (1.7): Adapt doxygen configuration to current version (1.8.8). 2016-11-21 13:31 bernlohr * generic_run.sh (1.34), hess/Makefile.hess (1.151), multi/multi_cta-prod3-lapalma3.cfg (1.1): More changes and additions to run La Palma simulations with 2*4+3*(15+19) telescopes. 2016-11-21 13:16 bernlohr * cfg/CTA/: CTA-ULTRA6-LaPalma3.cfg (1.1), array_trigger_ultra6_lapalma3.dat (1.1): Add top-level and array trigger configuration for a La Palma simulation with 2*4 LSTs + (15+19) FlashCam + (15+19) NectarCam + (15+19) SCT MSTs. 2016-11-18 13:19 bernlohr * cfg/CTA/: camera_CTA-MST-FlashCam-2304.dat (1.2), camera_CTA-MST-FlashCam.dat (1.5) (utags: prod5, prod6beta1): The funnel = pixel shape type for FlashCam was wrong (wrong orientation of hexagon), resulting in a 3.6% loss of signal (21/6-2*sqrt(3) to be precise). 2016-11-17 16:32 bernlohr * Cameras/: fov.cc (1.1), showcam.gpl.sh (1.1): Add a utility program for calculating the field-of-view diameter corresponding to existing camera definition files (and using a separetely evaluated effective focal length). The gnuplot script uses it to illustrate the resulting camera edges. 2016-11-03 17:14 bernlohr * LightEmission/LightSourcesPresentation.pdf (1.2, prod6beta1, prod5): Reduce size of light sources presentation. 2016-11-03 16:50 bernlohr * LightEmission/Doxyfile (1.1), LightEmission/LightSourcesPresentation.pdf (1.1), LightEmission/Makefile (1.5), hess/Makefile.hess (1.150): Add documentation for LightEmission component. 2016-11-03 16:05 bernlohr * corsika/: README (1.72), corsika.dox (1.24): And a few more little changes to documentation. 2016-11-03 14:22 bernlohr * corsika/: README (1.71), README.tex (1.63): One more e-mail address and CORSIKA www URL updated. 2016-11-03 14:18 bernlohr * corsika/: Copyright (1.10), README (1.70), README.tex (1.62): Minor update to README notes and CORSIKA contact addresses. 2016-11-03 13:10 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.12): Add comments on apparent problems in ASTRI configuration. No values changed so far. 2016-10-24 14:05 bernlohr * LightEmission/Makefile (1.4): Export one atmospheric density profile for standalone package to avoid dependency on other packages. 2016-10-21 14:27 bernlohr * common/: absorb.h (1.8), mc_aux.h (1.129): Allow bypassing optics by default now. 2016-10-19 17:29 bernlohr * hess/Makefile.hess (1.149): Add 'rx' to list of programs always build. 2016-10-17 18:06 bernlohr * hess/Makefile.hess (1.148): Also export IACT/ATMO code needed for artificial light source programs. 2016-10-17 17:41 bernlohr * LightEmission/: IactLightEmission.cc (1.3), IactLightEmission.hh (1.3), Makefile (1.3), ff-1m.cc (1.3), ff-gct.cc (1.3), fpls.cc (1.2), ls-beam.cc (1.2), octo.cc (1.2): Artifical light source update, in particular improving efficiency for non-isotropic distant sources. 2016-10-13 17:50 bernlohr * corsika/: iact.c (1.92), iact_full5.c (1.94): Bypass a few more lines of code when IACT_NO_GRID is defined. 2016-10-11 18:35 bernlohr * hess/Makefile.hess (1.147): Add a few more transmission tables and include LightEmission programs in exported tar package. 2016-10-11 18:34 bernlohr * Copyright (1.5): 2016 2016-10-11 18:32 bernlohr * LightEmission/: IactLightEmission.cc (1.2), IactLightEmission.hh (1.2), Makefile (1.2), ff-1m.cc (1.2), ff-gct.cc (1.2), ls-beam.cc (1.1): Improvements of artificial light source framework and programs. 2016-10-07 18:28 bernlohr * cfg/common/: atm_trans_2180_1_0_0_0_0.dat (1.1), atm_trans_2180_1_10_0_0_2180.dat (1.1), atm_trans_2180_1_3_0_0_0.dat (1.1), atm_trans_2180_1_3_0_0_2180.dat (1.1), atm_trans_2400_1_0_0_0_0.dat (1.1), atm_trans_2400_1_3_0_0_0.dat (1.1), atm_trans_2400_1_6_0_0_0.dat (1.1) (utags: prod5, prod6beta1): Add more atmospheric transmission tables. 2016-10-07 18:25 bernlohr * cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.11): Comments explaining better re-evaluated NSB values. 2016-10-07 18:18 bernlohr * cfg/hess2/hess-phase2b.cfg (1.11): Include optical efficiency for phase2b5 simulations. 2016-10-07 18:17 bernlohr * doc_src/sim_hessarray.tex (1.57): Document a number of planned parameters. 2016-09-29 14:31 bernlohr * LightEmission/: IactLightEmission.cc (1.1), IactLightEmission.hh (1.1), Makefile (1.1), ff-1m.cc (1.1), ff-gct.cc (1.1), fpls.cc (1.1), octo.cc (1.1): Install code for artificial light sources in its own directory. 2016-09-29 14:18 bernlohr * corsika/: IactLightEmission.cc (1.6), IactLightEmission.hh (1.6), fpls.cc (1.3), octo.cc (1.6): Move into separate directory. 2016-09-22 17:10 bernlohr * common/: mc_aux.h (1.128), sim_config.c (1.127), sim_imaging.c (1.68), sim_telarray.c (1.113): Working version with partial and full bypassing of dual-mirror optics ray-tracing. 2016-09-20 15:54 bernlohr * common/sim_telarray.c (1.112): Add optional debugging output with bypassing optics. Bypassing for dual mirror telescopes is still incomplete. 2016-09-20 15:51 bernlohr * corsika/fpls.cc (1.2): Add instruction how to produce camera image PS file. 2016-09-20 15:48 bernlohr * corsika/: IactLightEmission.hh (1.5), fpls.cc (1.1), octo.cc (1.5): Add rotation of vectors for light sources. Add fpls example for a search-light kind of rotation of a light source in front of the camera (unrealistic like the superluminal octocopter but more fun than a simple flatfielding unit). 2016-09-16 18:37 bernlohr * corsika/: IactLightEmission.cc (1.5), octo.cc (1.4): Drop rndm_table.c from the compilation instruction; it is not needed. 2016-09-16 18:12 bernlohr * corsika/: IactLightEmission.cc (1.4), IactLightEmission.hh (1.4), octo.cc (1.3): First feature-complete version of artificial light sources. 2016-09-16 18:04 bernlohr * corsika/: iact.c (1.91), iact.h (1.4), iact_full5.c (1.93): Add a function to report back how many photon bunches are actually being stored in an event (not used by CORSIKA but with artificial light sources). With IACT_NO_GRID we longer enforce detector fiducial spheres to be entirely above the observation level but just their centers. 2016-09-12 18:01 bernlohr * corsika/iact.c (1.90): (same as iact_full5.c) 2016-09-12 17:51 bernlohr * corsika/corsika_build_script (1.8): For GCC>=4.2 the compiler can be instructed to use the native machine architecture to get optimum performance. 2016-09-12 17:47 bernlohr * corsika/gen_config (1.14): Support for CORSIKA versions 7.3, 7.4, and 7.5 is no longer experimental, thus no need to unsettle users. 2016-09-12 17:43 bernlohr * corsika/: IactLightEmission.cc (1.3), IactLightEmission.hh (1.3), fake_corsika.c (1.2), octo.cc (1.2): Fixes to artificial light source code (still incomplete but working again). 2016-09-12 17:42 bernlohr * corsika/: README (1.69), README.tex (1.61), iact_full5.c (1.92): Minor documentation changes. 2016-09-12 17:35 bernlohr * corsika/: corsika-7370.patch (1.2), corsika-74000.patch (1.2): Remove outdated CORSIKA patches. 2016-08-25 17:26 bernlohr * cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.19, prod6beta1, prod5): Use comma in parameter list for consistent look although it makes no difference in the result. 2016-07-29 17:10 bernlohr * corsika/: IactLightEmission.cc (1.2), IactLightEmission.hh (1.2), octo.cc (1.1): Split superluminal octocopter example program into separate file. 2016-07-28 17:38 bernlohr * corsika/: IactLightEmission.cc (1.1), IactLightEmission.hh (1.1): Early development version of artificial light source package. 2016-07-28 17:35 bernlohr * corsika/corsika-6990-700nm.patch (1.2): File no longer needed, was integrated into normal patch. 2016-07-28 17:35 bernlohr * corsika/: corsika.dox (1.23), iact.h (1.3): Documentation update 2016-07-28 17:33 bernlohr * doc_src/sim_hessarray.tex (1.56): Documentation update. 2016-07-26 16:57 bernlohr * testeff.c (1.31), common/absorb.h (1.7), common/mc_aux.h (1.127), common/sim_absorb.c (1.19), common/sim_config.c (1.126), common/sim_telarray.c (1.111), hess/hess_defaults.h (1.93): First attempt at bypassing optics (compile with -DWITH_BYPASS_OPTICS to test). 2016-07-26 14:53 bernlohr * doc_src/sim_hessarray.tex (1.55): Update documentation. 2016-07-26 14:52 bernlohr * corsika/: README (1.68), README.tex (1.60), atmo.c (1.18), iact.c (1.89), iact.h (1.2), iact_full5.c (1.91), sampling.c (1.5): Allow compilation of C code with C++ compiler or mixed C/C++ programs with 'extern "C"' declarations in all headers etc. Avoid compiler warnings about unused function parameters etc. Update documentation. 2016-07-26 14:47 bernlohr * cfg/CTA/PulseShape_MPPC_S10943_Shaped_CutOff350MHz_Prod3.dat (1.3, prod6beta1, prod5): Fix and comment extrapolation of pulse shape tail back to zero amplitude. 2016-07-07 16:05 bernlohr * corsika/: Makefile.dist (1.60), README (1.67), README.tex (1.59), atmo.c (1.17), atmo.h (1.6), fake_corsika.c (1.1), iact.c (1.88), iact.h (1.1), iact_full5.c (1.90), sampling.c (1.4), sampling.h (1.3, prod6beta1, prod5), sim_skeleton.c (1.8): Minor modifications for compatibility with newer compilers. Adding example program and IACT interface definitions to simulate artificial light sources without CORSIKA. 2016-06-21 14:00 bernlohr * corsika/: corsika-6990-700nm.patch (1.1), corsika-6990.patch (1.4, prod6beta1, prod5), corsika-73700.patch (1.1, prod6beta1, prod5), corsika-74000.patch (1.1), corsika-74005-700nm.patch (1.1, prod6beta1, prod5), corsika-74100.patch (1.1, prod6beta1, prod5): Include 700nm patch into normal CORSIKA 6.990 patch. Add other accumulated patches to CVS. 2016-06-01 18:58 bernlohr * generic_run.sh (1.33), cfg/CTA/CTA-ULTRA6-11LST+158ASTRI.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-ULTRA6-41FC+158SST-1M.cfg (1.1, prod6beta1, prod5), cfg/CTA/CTA-ULTRA6-41NC+158GCT.cfg (1.1, prod6beta1, prod5), hess/Makefile.hess (1.146), util/corsika_autoinputs.cc (1.14): Add configuration for prod-3b (CTA South). 2016-05-04 20:39 bernlohr * common/: sim_imaging.c (1.67), sim_signal.c (1.72), sim_telarray.c (1.110): Fix error in time between reflection on primary and on secondary in dual mirror optics (which was commented as "FIXME!"). This was resulting in an almost fixed offset of arrival times in the camera which is subtracted in the camera-internal signal simulation but the central trigger times reported for such telescopes had an error depending on the height of that telescope. 2016-03-15 15:54 bernlohr * common/sim_absorb.c (1.18), common/sim_config.c (1.125), common/sim_imaging.c (1.66), common/sim_signal.c (1.71), common/sim_telarray.c (1.109), util/multipipe_corsika.c (1.18): Due to changes in initial.h (hessio package), portability issues with str[n]casecmp and gettimeofday had to be resolved. 2016-03-15 10:52 bernlohr * util/corsika_autoinputs.cc (1.13): CORSIKA 7.5 will not accept 'DIRECT /dev/null' anymore but has another instruction for switching particle output off ('PAROUT F F'). In that case 'DIRECT ./' does place the datbase file in the same place as before. The corsika_autoinputs program was modified to do this replacement on the fly, if the CORSIKA version is recognized as some 7.5 version, either from the path name or the CORSIKA_VERSION environment variable. 2016-03-15 10:48 bernlohr * corsika/gen_config (1.13): Allowing building CORSIKA 7.5 2016-03-08 17:07 bernlohr * common/mc_aux.h (1.126), common/sim_config.c (1.124), common/sim_signal.c (1.70), common/sim_telarray.c (1.108), hess/sim_conv2hess.c (1.98): Add option to store number of photons hitting each pixel along with the list of photo-electrons (not activated by default for efficiency reasons). 2016-02-19 16:40 bernlohr * common/mc_aux.h (1.125): Same limit for MAX_TEL as H_MAX_TEL in case of CTA_PROD3_DEMO (increased from 125 to 126 to include arrays like 2KC etc.). 2016-02-19 16:27 bernlohr * util/norm_spe.cc (1.2): Include fraction of low-amplitude signals and excess noise factor in output. 2016-02-18 14:59 bernlohr * corsika/: README (1.66), README.tex (1.58): Minor documentation updates. 2016-02-17 16:43 bernlohr * testeff.c (1.30): Add optional extra columns for NSB contributions; use the reduced impact of site altitude in all NSB calculations. 2016-02-05 15:30 bernlohr * hess/Makefile.hess (1.145), multi/multi_cta-prod3-demo.cfg (1.3), multi/multi_cta-prod3-demo2.cfg (1.2), multi/multi_cta-prod3-demo3.cfg (1.2): Fixing files needed for prod3-demo2 and 3. 2016-02-05 15:29 bernlohr * Cameras/modular_camera.cc (1.5): Experimental additions for building different camera configuration files. 2016-02-05 13:37 bernlohr * run_sim_hessarray_generic (1.3), hess/Makefile.hess (1.144), multi/multi_cta-prod3-demo2.cfg (1.1), multi/multi_cta-prod3-demo3.cfg (1.1): Export multipipe configuration for demos 2 & 3 explicitly and use SIMTEL_MULT_CFG environment variable to switch between demo configurations. 2016-02-02 18:17 bernlohr * hess/Makefile.hess (1.143): Exporting additional demo configurations for data rate (and data format) tests. 2016-02-02 18:15 bernlohr * cfg/CTA/: CTA-ULTRA6-MST-FlashCam.cfg (1.10), CTA-ULTRA6-MST-FlashCam2304.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-MST-FlashCam375.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-MST-FlashCam500.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-MST-NectarCam.cfg (1.9), CTA-ULTRA6-SCT.cfg (1.8), CTA-ULTRA6-SST-DC.cfg (1.10), CTA-ULTRA6-SST-GCT-M.cfg (1.10, prod6beta1, prod5), CTA-ULTRA6-SST-GCT-S.cfg (1.11), CTA-ULTRA6-demo2rad.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-demo2sect.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-demo3.cfg (1.1, prod6beta1, prod5), CTA-ULTRA6-site.cfg (1.3, prod6beta1, prod5), camera_CTA-MST-FlashCam-2304.dat (1.1), pulse_FlashCam_raw375.dat (1.1, prod6beta1, prod5), pulse_FlashCam_raw500.dat (1.1, prod6beta1, prod5): Adding DATA_RATE_TEST option (closer to nominal readout windows) for prod-3 configuations. Adding some demo and test configurations. 2016-02-02 18:10 bernlohr * multi/: multi_cta-prod3-demo.cfg (1.2), multi_cta-prod3-lapalma.cfg (1.3, prod6beta1, prod5), multi_cta-trg-test-prod3-LST1.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-LST4.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-MST1.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-MST4.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-SST1.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-SST1n.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-SST4.cfg (1.1, prod6beta1, prod5), multi_cta-trg-test-prod3-SST4n.cfg (1.1, prod6beta1, prod5): Adding multipipe_corsika configuration for trigger tests to CVS; plus a few updates. 2016-02-02 14:35 bernlohr * util/pfp.c (1.4): Treat underscore like alphanumeric character in variable name expansion. 2016-01-28 00:54 bernlohr * corsika/: README (1.65), README.tex (1.57): Minor additions. 2016-01-27 21:21 bernlohr * hess/sim_conv2hess.c (1.97): Use correct number of zero-suppresion thresholds to copy (which applies only when actually using the zero-suppressed data format variant). 2016-01-27 15:48 bernlohr * corsika/README (1.64): Regenerated. 2016-01-27 15:47 bernlohr * corsika/: Copyright (1.9), Makefile.dist (1.59), README (1.63), README.tex (1.56), iact.c (1.87), iact_full5.c (1.89): Allow for longer TELFIL file names, repackage with additional patches. 2015-12-21 18:33 bernlohr * hess/Makefile.hess (1.142): Add multipipe_corsika configuration files suitable for prod-3 muon simulations. 2015-12-21 18:32 bernlohr * cfg/: common/Benn_LaPalma_sky_converted.lis (1.4), hess2/hess-phase2b.cfg (1.10): Adding a few comments to configuration files. 2015-10-20 16:59 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.11), CTA-ULTRA6-SST-GCT-S.cfg (1.10): Use version 2 config for ASTRI by default. Adapt GCT-S to the same M1 reflectivity again as ASTRI (version 2). 2015-10-16 15:45 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI2.cfg (1.1), common/mc_aux.h (1.124), hess/Makefile.hess (1.141): Allow overriding maximum no. of telescopes, pixels, sectors, drawers, slices to tailor specific versions at compile-time without need for code modifications. Using the same definitions as for the hessio library: MAXIMUM_TELESCOPES, MAXIMUM_PIXELS, MAXIMUM_SECTORS, MAXIMUM_DRAWERS, MAXIMUM_SLICES. Also add a configuration file which defines ASTRI_V2 for the newer ASTRI configuration (before including the config file common to both prod-3 ASTRI versions). 2015-10-14 16:19 bernlohr * cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.10), cfg/CTA/inaf_m1_refl.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.140): ASTRI_V2 configuration with safe threshold settings as evaluated. 2015-10-12 14:35 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-GCT-M.cfg (1.9), CTA-ULTRA6-SST-GCT-S.cfg (1.9): Updated FADC simulation window. 2015-10-12 14:34 bernlohr * cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.8): Updated NectarCam parameters by JF Glicenstein. 2015-10-12 13:59 bernlohr * cfg/CTA/PDE_ASTRI_LCT5_75um_OV_4V_meas.dat (1.2, prod6beta1, prod5): Add short-wavelength points in ASTRI PDE. 2015-10-01 14:40 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-DC.cfg (1.9), CTA-ULTRA6-SST-GCT-M.cfg (1.8), CTA-ULTRA6-SST-GCT-S.cfg (1.8): Tuned simulation and readout window placement. 2015-10-01 14:39 bernlohr * hess/Makefile.hess (1.139): Export La Palma prod-3 array trigger config file. 2015-10-01 12:59 bernlohr * Cameras/drawdrawers.cc (1.2): Not actually needing simpletable library, just stdtools. 2015-09-28 15:58 bernlohr * cfg/CTA/: CTA-ULTRA6-LST.cfg (1.10), CTA-ULTRA6-pmt.cfg (1.5): Update LST camera parameters. 2015-09-28 15:57 bernlohr * cfg/CTA/CTA-ULTRA6-LaPalma.cfg (1.2, prod6beta1, prod5): With another LST and 12 more MSTs, also using array trigger file. 2015-09-28 15:55 bernlohr * cfg/CTA/array_trigger_ultra6_lapalma.dat (1.1, prod6beta1, prod5): Use array trigger file for La Palma simulations to reduce triggers by two LST positions not meant to be used together. 2015-09-22 14:35 bernlohr * multi/multi_cta-prod3-lapalma.cfg (1.2): Use MST type in output filename. 2015-09-22 14:26 bernlohr * cfg/CTA/LST_lightguide_eff.dat (1.1), cfg/CTA/astri_slow_shaper_50ns_x.dat (1.1, prod6beta1, prod5), cfg/CTA/camera_SST1M_DigiCam_7pix.dat (1.1, prod6beta1, prod5), cfg/CTA/mirror_CTA-100_1.20-90-0.01.dat (1.1, prod6beta1, prod5), cfg/CTA/optics_astri.cfg (1.1, prod6beta1, prod5), cfg/CTA/optics_gate.cfg (1.1, prod6beta1, prod5), cfg/CTA/optics_v17.cfg (1.1, prod6beta1, prod5), cfg/CTA/pde_hamamatsu_S10931-050P.dat (1.1, prod6beta1, prod5), cfg/CTA/pmt_specs_prod3.cfg (1.1, prod6beta1, prod5), cfg/CTA/pulse_FlashCam_raw1.dat (1.1, prod6beta1, prod5), cfg/CTA/qe_si-pmt_excelitas.dat (1.1, prod6beta1, prod5), cfg/CTA/ref_SANKO_29ave.dat (1.1, prod6beta1, prod5), cfg/CTA/ref_kerdry_lh14-13.dat (1.1, prod6beta1, prod5), cfg/hess/hess2_spe_new.dat (1.1, prod6beta1, prod5), cfg/hess/hess_camera_14mrad.dat (1.1, prod6beta1, prod5), cfg/hess2/hess2_comp_shape-v2.dat (1.1, prod6beta1, phase2d3, prod5), cfg/hess2/hess2_fadc_shape-v2.dat (1.1, prod6beta1, phase2d3, prod5), cfg/hess2/hessII_1mirror.dat (1.1, prod6beta1, phase2d3, prod5), cfg/hess2/qe_xp29600.dat (1.1, prod6beta1, phase2d3, prod5), multi/multi_cta-prod3-demo.cfg (1.1), multi/multi_cta-prod3-lst.cfg (1.1), multi/multi_cta-prod3-mst-fc.cfg (1.1), multi/multi_cta-prod3-mst-nc.cfg (1.1), multi/multi_cta-prod3-sct.cfg (1.1), multi/multi_cta-prod3-sst-astri.cfg (1.1, prod6beta1, prod5), multi/multi_cta-prod3-sst-dc.cfg (1.1, prod6beta1, prod5), multi/multi_cta-prod3-sst-gct.cfg (1.1): Add various configuration files (most of them used for test only) that were not yet in CVS. 2015-09-22 14:12 bernlohr * generic_run.sh (1.32), cfg/CTA/CTA-ULTRA6-LaPalma.cfg (1.1), cfg/common/atm_trans_2147_1_10_0_0_0.dat (1.1, prod6beta1, prod5), cfg/common/atm_trans_2147_1_10_0_0_2147.dat (1.1), cfg/common/atm_trans_2147_1_3_0_0_0.dat (1.1, prod6beta1, prod5), hess/Makefile.hess (1.138), multi/multi_cta-prod3-lapalma.cfg (1.1): Configuration for CTA Prod-3 production at La Palma site. 2015-09-22 14:11 bernlohr * corsika/: iact.c (1.86), iact_full5.c (1.88): Fix typo in decision for log file output line. 2015-07-20 14:45 bernlohr * cfg/CTA/reflectivity_Kerdry_200-1500nm.txt (1.1, prod6beta1, prod5), hess/Makefile.hess (1.137): Add updated Kerdry reflectivity measurement for GCT-M (not used in prod-3). 2015-07-17 14:59 tag prod-3-initial 2015-07-17 14:59 bernlohr * hess/Makefile.hess (1.136, prod-3-initial): Export transmission tables for altitude 2150 m. 2015-07-17 14:58 bernlohr * cfg/common/: atm_trans_2150_1_0_0_0_2150.dat (1.1), atm_trans_2150_1_10_0_0_2150.dat (1.1), atm_trans_2150_1_6_0_0_2150.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Transmission tables better matching the CTA South location near Paranal. 2015-07-15 21:19 bernlohr * cfg/CTA/: CTA-ULTRA6-LST.cfg (1.9), CTA-ULTRA6-SCT.cfg (1.7), CTA-ULTRA6-SST-GCT-M.cfg (1.7), CTA-ULTRA6-SST-GCT-S.cfg (1.7) (utags: prod-3-initial): A few more configuration updates for prod-3. 2015-07-15 21:18 bernlohr * corsika/: iact.c (1.85), iact_full5.c (1.87) (utags: prod-3-initial): Further improving the text of a warning message (nothing important). 2015-07-08 13:22 bernlohr * corsika/: iact.c (1.84), iact_full5.c (1.86): Update version string. 2015-07-08 11:52 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.8), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.9, prod-3-initial), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.7, prod-3-initial), cfg/CTA/CTA-ULTRA6-SCT.cfg (1.6), cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.9, prod-3-initial), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.8, prod-3-initial), cfg/CTA/CTA-ULTRA6-SST-GCT-M.cfg (1.6), cfg/CTA/CTA-ULTRA6-SST-GCT-S.cfg (1.6), hess/Makefile.hess (1.135): CTA configuration update with trigger thresholds as avaluated. 2015-07-08 10:53 bernlohr * cfg/CTA/: CTA-ULTRA6-dsum-shaping-FlashCam-1.dat (1.1), CTA-ULTRA6-dsum-shaping-FlashCam-2.dat (1.1), CTA-ULTRA6-dsum-shaping-FlashCam-2a-pz.dat (1.1), CTA-ULTRA6-dsum-shaping-FlashCam-2a.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Different trigger pulse shaping variants for FlashCam 2015-07-03 20:52 bernlohr * cfg/CTA/: CTA-ULTRA6-LST.cfg (1.7), CTA-ULTRA6-MST-FlashCam.cfg (1.8), CTA-ULTRA6-MST-NectarCam.cfg (1.6), CTA-ULTRA6-SCT.cfg (1.5), CTA-ULTRA6-SST-ASTRI.cfg (1.8), CTA-ULTRA6-SST-DC.cfg (1.7), CTA-ULTRA6-SST-GCT-M.cfg (1.5), CTA-ULTRA6-SST-GCT-S.cfg (1.5), CTA-ULTRA6-dsum-shaping-FlashCam.dat (1.3, prod6beta1, prod5, prod-3-initial), pulse_FlashCam_raw2.dat (1.2, prod6beta1, prod5, prod-3-initial): Update CTA prod-3 configurations. 2015-07-03 20:52 bernlohr * corsika/: iact.c (1.83), iact_full5.c (1.85): Add a bit more details to a warning message. 2015-06-29 17:56 bernlohr * generic_run.sh (1.31, prod-3-initial), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.7), cfg/CTA/CTA-ULTRA6-dsum-shaping-FlashCam.dat (1.2), cfg/CTA/pulse_FlashCam_raw.dat (1.2, prod6beta1, prod5, prod-3-initial), cfg/CTA/pulse_FlashCam_raw2.dat (1.1), hess/Makefile.hess (1.134): Update pulse shapes and trigger pulse shaping for FlashCam. 2015-06-29 13:51 bernlohr * cfg/CTA/CTA-ULTRA6-dsum-shaping-FlashCam.dat (1.1): Configuration data file was not in CVS. 2015-06-29 13:49 bernlohr * common/sim_imaging.c (1.65, prod-3-initial): Remove extra brace which got copied-and-pasted into mast shadowing conditional code some time ago. 2015-06-25 17:56 bernlohr * hess/Makefile.hess (1.133): Export one more data file. 2015-06-25 17:55 bernlohr * util/: extract_corsika_multi.c (1.3), extract_corsika_tel.c (1.4), multipipe_corsika.c (1.17) (utags: prod-3-initial): Add another environment variable CORSIKA_SHOWERS which is set to the value configured with the NSHOW input card. 2015-06-25 14:55 bernlohr * cfg/CTA/CTA-ULTRA6-LST.cfg (1.6), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.6), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.5), cfg/CTA/CTA-ULTRA6-MST-optics.cfg (1.3, prod-3-initial), cfg/CTA/CTA-ULTRA6-SCT.cfg (1.4), cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.7), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.6), cfg/CTA/CTA-ULTRA6-SST-GCT-M.cfg (1.4), cfg/CTA/CTA-ULTRA6-SST-GCT-S.cfg (1.4), cfg/CTA/CTA-ULTRA6-SST-GCT.cfg (1.5, prod-3-initial), cfg/CTA/CTA-ULTRA6-common.cfg (1.4, prod-3-initial), cfg/CTA/CTA-ULTRA6-demo.cfg (1.3, prod6beta1, prod5, prod-3-initial), cfg/CTA/PDE_SiPM_SC-MST_Prod3x.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/PulseShape_MPPC_S10943_Shaped_CutOff350MHz_Prod3.dat (1.2, prod-3-initial), cfg/CTA/Reflectance_SC-MST_Prod3.dat (1.2, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-LST_analogsum21.dat (1.2, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-MST-FlashCam.dat (1.4, prod-3-initial), cfg/CTA/camera_CTA-MST-NectarCam_analogsum21.dat (1.2, prod6beta1, prod5, prod-3-initial), cfg/CTA/fake_astri_mirrorpos.dat (1.1, prod-3-initial), cfg/CTA/fake_sct_mirrorpos.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/inaf_m1_refl_multilay_meas.dat (1.2, prod6beta1, prod5, prod-3-initial), cfg/CTA/ref_AR100x.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/reflectivity_KERDRY.txt (1.2, prod6beta1, prod5, prod-3-initial), cfg/common/ref_AlSiO2HfO2.dat (1.2, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.132): Update prod-3 configuration files. 2015-06-25 14:54 bernlohr * Cameras/: mapmtpix.cc (1.3), modular_camera.cc (1.4) (utags: prod-3-initial): Add a few options to camera file generating tools. 2015-06-25 14:53 bernlohr * common/sim_imaging.c (1.64): Change a few output lines frm stderr to stdout. 2015-06-15 19:47 bernlohr * common/mc_aux.h (1.123, prod-3-initial): Change a few limits in case the SAVE_MEMORY option is used (not normally the case). 2015-06-15 19:45 bernlohr * generic_run.sh (1.30): All prod-3 configuration files now in main cfg/CTA folder. No need for extra include paths. 2015-06-15 19:37 bernlohr * cfg/CTA/: Angular_response_MPPC_Prod3.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA6-LST.cfg (1.5), CTA-ULTRA6-MST-FlashCam.cfg (1.5), CTA-ULTRA6-MST-NectarCam.cfg (1.4), CTA-ULTRA6-MST-optics.cfg (1.2), CTA-ULTRA6-SCT.cfg (1.3), CTA-ULTRA6-SST-ASTRI.cfg (1.6), CTA-ULTRA6-SST-DC.cfg (1.5), CTA-ULTRA6-SST-GCT-M.cfg (1.3), CTA-ULTRA6-SST-GCT-S.cfg (1.3), CTA-ULTRA6-SST-GCT.cfg (1.4), CTA-ULTRA6-common.cfg (1.3), CTA-ULTRA6-pmt.cfg (1.4, prod-3-initial), PDE_ASTRI_LCT5_75um_OV_4V_meas.dat (1.1, prod-3-initial), PDE_SiPM_SC-MST_Prod3.dat (1.1, prod6beta1, prod5, prod-3-initial), PulseShape_MPPC_S10943_Shaped_CutOff350MHz_Prod3.dat (1.1), Pulse_Height_Hybrid2_Xtalk5per_norm_Prod3.dat (1.1, prod6beta1, prod5, prod-3-initial), Reflectance_SC-MST_Prod3.dat (1.1), SPE_SST1M_Vb57.50_normalized.dat (1.1, prod6beta1, prod5, prod-3-initial), astri_M1_segments.dat (1.1, prod6beta1, prod5, prod-3-initial), astri_disc_shape_01_2013.dat (1.1, prod6beta1, prod5, prod-3-initial), astri_slow_shaper_50ns.dat (1.1, prod6beta1, prod5, prod-3-initial), camera-astri-smart4-prod3.dat (1.1, prod6beta1, prod5, prod-3-initial), camera-astri-smart5-prod3.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CHEC-S_GATE.dat (1.2, prod6beta1, prod5, prod-3-initial), camera_CHEC_GATE.dat (1.2, prod6beta1, prod5, prod-3-initial), camera_CTA-SC-MST-54mmModPitch_0.5mmModDS_6.5mmPixAct_Prod3.dat (1.1, prod-3-initial), cta_funnels_SST1M.dat (1.1, prod6beta1, prod5, prod-3-initial), cta_funnels_SST1M_borofilter540nm.dat (1.1, prod6beta1, prod5, prod-3-initial), glass_eff-CHEC-S.dat (1.1, prod6beta1, prod5, prod-3-initial), pulse_CTA-Fx.dat (1.3, prod6beta1, prod5, prod-3-initial), pulse_CTA-Fx3.dat (1.1, prod6beta1, prod5, prod-3-initial), pulse_SST1M_AfterPreamp.dat (1.1, prod6beta1, prod5, prod-3-initial), qe_S10985-050C_scaled_Vb57.50.dat (1.1, prod6beta1, prod5, prod-3-initial), ref_AR100.dat (1.1, prod6beta1, prod5, prod-3-initial), transmission_pmma_vs_lambda_meas0deg_coat_82raws.dat (1.1, prod6beta1, prod5, prod-3-initial), transmission_pmma_vs_theta_20150422.dat (1.1, prod6beta1, prod5, prod-3-initial): Updating prod-3 configuration and contributed config data files. 2015-06-15 16:50 bernlohr * util/norm_spe.cc (1.1, prod-3-initial): Add utility for normalizing the single-p.e. response files. 2015-06-02 16:53 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-GCT-M.cfg (1.2), CTA-ULTRA6-SST-GCT-S.cfg (1.2): Updated GCT config files with additional comments. 2015-06-02 14:30 bernlohr * cfg/CTA/CTA-ULTRA6-SST-GCT-M.cfg (1.1), cfg/CTA/CTA-ULTRA6-SST-GCT-S.cfg (1.1), cfg/CTA/PDE_ASTRI_LCT5_75um.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/SPEspectrum_57.50_2.500_0.080.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CHEC-S_GATE.dat (1.1), cfg/CTA/camera_GCT-M_GATE.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/disc_shape_CHEC-M.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/disc_shape_CHEC-S.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/gct_primary_segments.dat (1.1, prod-3-initial), cfg/CTA/gct_secondary_segment.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/glass_eff-CHEC-M.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/inaf_m1_refl_multilay_meas.dat (1.1), cfg/CTA/inaf_m2_refl_alsio2_32deg_sim.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/pulse_CHEC-M.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/pulse_CHEC-S.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/qe_h12700a.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/reflectivity_KERDRY.txt (1.1), cfg/CTA/spe_GCT-M.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/spe_GCT-M_norm.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/transmission_pmma_vs_lambda_meas0deg-81rows.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/transmission_pmma_vs_theta_meas.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.131): Adding (preliminary) configuration files for GCT. 2015-06-01 19:15 bernlohr * common/sim_signal.c (1.69), hess/sim_conv2hess.c (1.96) (utags: prod-3-initial): Make sure that data with 'peak_sensing' enabled is really stored as pulse sums and not as (length 1) traces. 2015-06-01 19:14 bernlohr * hess/Makefile.hess (1.130): Add Aclylite8_tra_v2013ref.dat to exported files. 2015-06-01 19:10 bernlohr * cfg/CTA/: Aclylite8_tra_v2013ref.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA6-LST.cfg (1.4): Change LST camera configuration from fixed transmission to table. 2015-06-01 19:09 bernlohr * testeff.c (1.29, prod-3-initial): Allow for more lines in filter etc. tables. 2015-05-31 16:56 bernlohr * Copyright (1.4, prod-3-initial), cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.5), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.4), cfg/CTA/CTA-ULTRA6-SST-GCT.cfg (1.3): When including the prod-2 SST configuration files, make sure that no telescopes get ignored. 2015-05-29 19:47 bernlohr * util/corsika_autoinputs.cc (1.12, prod-3-initial): Allow separating the run number booking and the real action, so that we can know the new run number and the working directory name in the script starting corsika_autoinputs (-g/-G options). 2015-05-29 18:50 bernlohr * hess/Makefile.hess (1.129): Moved/renamed a few configuration files and scripts. 2015-05-29 18:49 bernlohr * cfg/CTA/: CTA-ULTRA6-LST.cfg (1.3), qe_R11920-100-02.dat (1.1, prod6beta1, prod5, prod-3-initial): Use QE table from LST group for LST although same QE is expected for LSTs and MSTS. 2015-05-29 18:47 bernlohr * testeff.c (1.28): Fix double counting of -camtrans value. 2015-05-29 17:00 bernlohr * cfg/CTA/: CTA-ULTRA6-SST-ASTRI.cfg (1.4), CTA-ULTRA6.cfg (1.3, prod6beta1, prod5, prod-3-initial): Just comments. 2015-05-29 17:00 bernlohr * generic_run.sh (1.29): Allow direct output path instead of following the normal scheme, most useful for intermediate output which is not meant for permanent storage. 2015-05-29 16:56 bernlohr * common/sim_telarray.c (1.107, prod-3-initial): Check once (for every telescope) if the CORSIKA wavelength range covers all of the sensitive range. 2015-05-26 17:57 bernlohr * generic_run.sh (1.28), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.17, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.4), cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.3), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.3), cfg/CTA/CTA-ULTRA6-demo.cfg (1.2), cfg/CTA/camera_CTA-MST-FlashCam.dat (1.3), common/mc_aux.h (1.122), common/sim_telarray.c (1.106), corsika/corsika_build_script (1.7, prod-3-initial), hess/Makefile.hess (1.128), hess/hess_defaults.h (1.92, prod-3-initial): Work on configuration and memory use for prod-3. Not complete yet. 2015-05-20 18:59 bernlohr * generic_run.sh (1.27), testeff.c (1.27), cfg/CTA/CTA-LST_lightguide_eff.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA6-LST.cfg (1.2), cfg/CTA/CTA-ULTRA6-MST-FlashCam.cfg (1.3), cfg/CTA/CTA-ULTRA6-MST-NectarCam.cfg (1.3), cfg/CTA/CTA-ULTRA6-SCT.cfg (1.2), cfg/CTA/CTA-ULTRA6-SST-ASTRI.cfg (1.2), cfg/CTA/CTA-ULTRA6-SST-DC.cfg (1.2), cfg/CTA/CTA-ULTRA6-SST-GCT.cfg (1.2), cfg/CTA/CTA-ULTRA6-common.cfg (1.2), cfg/CTA/CTA-ULTRA6-demo.cfg (1.1), cfg/CTA/CTA-ULTRA6-pmt.cfg (1.3), cfg/CTA/CTA-ULTRA6-site.cfg (1.2, prod-3-initial), cfg/CTA/CTA-ULTRA6.cfg (1.2), cfg/CTA/camera_CTA-LST_analogsum21.dat (1.1), cfg/CTA/camera_CTA-MST-FlashCam.dat (1.2), cfg/CTA/camera_CTA-MST-NectarCam.dat (1.2), cfg/CTA/camera_CTA-MST-NectarCam_analogsum21.dat (1.1), cfg/CTA/mirror_CTA-LST-v20141201-198.dat (1.1, prod6beta1, prod5, prod-3-initial), common/mc_aux.h (1.121), hess/Makefile.hess (1.127): Working on configuration files (unfinished). 2015-05-20 18:59 bernlohr * util/extract_corsika_multi.c (1.2): Fix writing split data to the wrong buffer. 2015-04-30 17:41 bernlohr * common/mc_aux.h (1.120): No need for 150 SCTs in prod-3. 2015-04-30 17:40 bernlohr * cfg/hess2/hess-phase2b.cfg (1.9, prod-3-initial): Updated optical efficiencies. 2015-04-27 13:29 bernlohr * util/extract_corsika_multi.c (1.1): Add tool to split CORSIKA output into multiple data files. 2015-04-27 13:28 bernlohr * common/mc_aux.h (1.119), common/sim_config.c (1.123, prod-3-initial), common/sim_histograms.c (1.23, prod-3-initial), common/sim_imaging.c (1.63), common/sim_telarray.c (1.105), hess/Makefile.hess (1.126), hess/hess_defaults.h (1.91): (Re-)commit after some CVS problem: add SECONDARY_SHADOW_OFFSET and CAMERA_FILTER configuration parameters. For the IMAGING_LIST output add separate columns for angle of incidence onto the camera, w.r.t. optical axis, focal surface normal, and pixel normal. 2015-04-27 13:04 bernlohr * cfg/hess2/hess-phase2b.cfg (1.8): Updated preliminary muon efficiencies for phase2b0/phase2b3/phase2b4. 2015-04-21 12:12 bernlohr * testeff.c (1.26): Add a message in case the funnel wavelength dependence is used. 2015-04-21 12:11 bernlohr * hess/Makefile.hess (1.125): Also export a minimal HESS configuration for the general public. 2015-04-20 17:41 bernlohr * corsika/iact_full5.c (1.84): Scale and show 5-digit CORSIKA versions correctly (6990 -> 6.990 and 74005 -> 7.4005). 2015-04-20 17:39 bernlohr * doc_src/sim_hessarray.tex (1.54, prod-3-initial): Documentation update. 2015-04-20 17:37 bernlohr * cfg/hess2/hess-phase2b.cfg (1.7): Fill in preliminary optical efficiencies for phase2b3. 2015-04-16 18:21 bernlohr * cfg/CTA/: CTA-ULTRA6-MST-FlashCam.cfg (1.2), CTA-ULTRA6-MST-NectarCam.cfg (1.2), CTA-ULTRA6-pmt.cfg (1.2), qe_R12992-100-05.dat (1.1, prod6beta1, prod5, prod-3-initial): Updates for prod-3 configuration. 2015-04-16 16:13 bernlohr * cfg/CTA/: CTA-ULTRA5-medium.cfg (1.16, prod6beta1, prod5, prod-3-initial), camera_CTA-MST-FlashCam.dat (1.1), camera_CTA-MST-NectarCam.dat (1.1): FlashCam and NectarCam camera geometries supported in transition to prod-3 config. 2015-04-02 15:05 bernlohr * common/: mc_aux.h (1.118), sim_config.c (1.122), sim_imaging.c (1.62): Shadowing by secondary mirror and baffle with a few extra features. 2015-04-02 15:04 bernlohr * cfg/hess2/: hess-phase2.cfg (1.6, prod-3-initial), hess-phase2b.cfg (1.6), hess2.cfg (1.6, prod6beta1, phase2d3, prod5, prod-3-initial): First update towards phase2b3 production. 2015-03-31 18:04 bernlohr * doc_src/sim_hessarray.tex (1.53): Small documentation fix. 2015-03-18 16:36 bernlohr * common/: sim_config.c (1.121), sim_imaging.c (1.61): Another fix for angle-dependent telescope transmission. 2015-03-18 16:16 bernlohr * common/mc_aux.h (1.117), common/sim_config.c (1.120), common/sim_imaging.c (1.60), doc_src/sim_hessarray.tex (1.52), hess/hess_defaults.h (1.90): Activate angle-dependent telescope transmission, an additional column for the imaging_list output file plus several bug fixes (mainly breaking single-reflector ray-tracing). 2015-03-17 18:14 bernlohr * common/sim_telarray.c (1.104): Update reported preprocessor defines. 2015-03-17 18:14 bernlohr * corsika/: README (1.62), README.tex (1.55) (utags: prod-3-initial): Update file sizes and date. 2015-03-17 17:39 bernlohr * common/mc_aux.h (1.116), common/sim_config.c (1.119), common/sim_imaging.c (1.59), doc_src/sim_hessarray.tex (1.51), hess/hess_defaults.h (1.89): More changes for inclined pixels. Also adding a baffle around the secondary reflector. 2015-03-13 19:52 bernlohr * common/mc_aux.h (1.115), common/sim_config.c (1.118), common/sim_imaging.c (1.58), common/sim_telarray.c (1.103), hess/hess_defaults.h (1.88), hess/sim_conv2hess.c (1.95): Cleaner and more accurate treatment of inclined pixels. 2015-02-16 12:35 bernlohr * generic_run.sh (1.26), testeff.c (1.25), common/absorb.h (1.6, prod-3-initial), common/mc_aux.h (1.114), common/sim_absorb.c (1.17, prod-3-initial), common/sim_config.c (1.117), common/sim_imaging.c (1.57), common/sim_signal.c (1.68), common/sim_telarray.c (1.102), corsika/corsika.dox (1.22, prod-3-initial), corsika/iact.c (1.82), corsika/iact_full5.c (1.83), doc_src/sim_hessarray.tex (1.50), hess/hess_defaults.h (1.87), hess/sim_conv2hess.c (1.94): Add features like segmented mirrors in dual-mirror optics, alternate ways to specify the primary and secondary diameter, shadowing by the backside of the camera (all optics types), different pedestal parameters for low gain as for the high gain channel, add peak sensing in addition to integrating signals, ... 2014-12-18 11:11 bernlohr * cfg/hess2/hess-phase2b.cfg (1.5): Finalize configuration for HESS phase2b2 production. 2014-12-18 11:10 bernlohr * cfg/CTA/CTA-ULTRA5.cfg (1.17, prod6beta1, prod5, prod-3-initial): Fix problem with array trigger defined in default telescope configuration. 2014-12-18 11:05 bernlohr * doc_src/sim_hessarray.tex (1.49): Update documentation for additional configuration parameters. 2014-12-18 11:01 bernlohr * common/mc_aux.h (1.113), common/sim_config.c (1.116), common/sim_signal.c (1.67), common/sim_telarray.c (1.101), hess/Makefile.hess (1.124), hess/hess_defaults.h (1.86), hess/sim_conv2hess.c (1.93): More flexibility for light sources in simulation of flat-fielding and single-p.e. measurements. 2014-12-18 11:00 bernlohr * common/sim_imaging.c (1.56): New implementation of the iteration for intersection with polynomial surfaces in dual mirror optics raytracing. 2014-12-04 15:06 bernlohr * generic_run.sh (1.25), cfg/hess2/hess-phase2b.cfg (1.4), hess/Makefile.hess (1.123), multi/multi_phase2.cfg (1.3, prod6beta1, prod5, prod-3-initial): Fine-tuning HESS phase2b2 configuration. 2014-12-04 15:05 bernlohr * cfg/CTA/: CTA-ULTRA6-LST.cfg (1.1), CTA-ULTRA6-MST-FlashCam.cfg (1.1), CTA-ULTRA6-MST-NectarCam.cfg (1.1), CTA-ULTRA6-MST-optics.cfg (1.1), CTA-ULTRA6-SCT.cfg (1.1), CTA-ULTRA6-SST-ASTRI.cfg (1.1), CTA-ULTRA6-SST-DC.cfg (1.1), CTA-ULTRA6-SST-GCT.cfg (1.1), CTA-ULTRA6-common.cfg (1.1), CTA-ULTRA6-pmt.cfg (1.1), CTA-ULTRA6-site.cfg (1.1), CTA-ULTRA6.cfg (1.1), array_trigger_ultra6.dat (1.1, prod-3-initial): Adding configuration files for upcoming prod-3, so far rather dummy. 2014-12-04 13:05 bernlohr * cfg/hess/: atm_trans_1835_1_10_0_0_1835_10.0.dat (1.1), atm_trans_1835_1_10_0_0_1835_15.0.dat (1.1), atm_trans_1835_1_10_0_0_1835_17.5.dat (1.1), atm_trans_1835_1_10_0_0_1835_20.0.dat (1.1), atm_trans_1835_1_10_0_0_1835_22.5.dat (1.1), atm_trans_1835_1_10_0_0_1835_25.0.dat (1.1), atm_trans_1835_1_7_0_0_1835.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): More alternate atmospheric transmission tables for the HESS site. 2014-12-04 12:22 bernlohr * common/sim_config.c (1.115), hess/hess_defaults.h (1.85): Add options to flip mirror x/y coordinates without needing a separate mirror list file. 2014-12-02 12:26 bernlohr * corsika/corsika_build_script (1.6): Sync again to exported version. 2014-11-14 20:48 bernlohr * util/multipipe_corsika.c (1.16): Avoid ugly CORSIKA_PHI variable with rounding errors around zero. 2014-11-13 15:30 bernlohr * cfg/CTA/CTA-ULTRA5-large.cfg (1.14, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-medium-sc.cfg (1.7, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-medium.cfg (1.15), multi/multi_cta-ultra5.cfg (1.5, prod6beta1, prod5, prod-3-initial): And one more fix and a few typos for final prod-2 setup. 2014-11-13 14:56 bernlohr * cfg/hess2/hess-phase2b.cfg (1.3): Improve matching with HESS data in 2013. 2014-11-13 14:55 bernlohr * process_sc3 (1.1, prod6beta1, prod5, prod-3-initial): Add script used in prod-2 with extra SCTs at MPIK. 2014-11-13 14:55 bernlohr * cfg/CTA/CTA-ULTRA5-common.cfg (1.4, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-sites.cfg (1.4, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.18, prod-3-initial), multi/multi_cta-ultra5.cfg (1.4): Updating CTA configuration for final prod-2. 2014-11-12 16:25 bernlohr * Mirrors/: draw_mirrors.c (1.7), plot_mirrors.c (1.5) (utags: prod-3-initial): Use more common code in mirror positioning and mirror drawing utility. 2014-11-12 15:56 bernlohr * cfg/hess2/hess-phase2b.cfg (1.2): HESS configuration update 2014-11-12 15:55 bernlohr * hess/Makefile.hess (1.122): Adjust partitioning of the different project-specific configuration file packages. 2014-11-12 13:38 bernlohr * multi/: multi_phase1c.cfg (1.1), multi_phase1c1.cfg (1.1), multi_phase1c2.cfg (1.1), multi_phase1c3.cfg (1.1) (utags: prod-3-initial, prod5, prod6beta1): Historical files for HESS simulations added to CVS. 2014-11-12 13:36 bernlohr * cfg/common/: atm_trans_2100_1_0_0_0_0.dat (1.1), atm_trans_2100_1_0_0_0_2100.dat (1.1), atm_trans_2100_1_10_0_0_0.dat (1.1), atm_trans_2100_1_10_0_0_2100.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): New transmission files for Armazones-2K at 2100 m elevation. 2014-11-11 18:19 bernlohr * cfg/: hess/hess_bestguess.cfg (1.33, prod6beta1, prod5, prod-3-initial), hess2/hess-phase2b.cfg (1.1), hess2/hess2sector.cfg (1.7, prod-3-initial): Update HESS phase2b configuration files, also merging actual phase2b configuration statements from several included files into one file. 2014-11-11 18:16 bernlohr * hess/Makefile.hess (1.121): Separate configuration files into common and project-specific tar files. 2014-11-11 17:48 bernlohr * common/: sim_imaging.c (1.55), sim_signal.c (1.66), sim_telarray.c (1.100): More complete reporting of preprocessor definitions used. More debugging output for dual mirror raytracing. 2014-10-31 14:19 bernlohr * cfg/: hess/hess_bestguess.cfg (1.32), hess2/hess-phase2.cfg (1.5), hess2/hess2.cfg (1.5), hess2/hess2_dish.cfg (1.7, prod6beta1, phase2d3, prod5, prod-3-initial): Make HESS2 configurations safer to use. 2014-10-28 17:16 bernlohr * multi/: multi_cta-prod2-muon-4m-SST.cfg (1.1), multi_cta-prod2-muon-7m-SST.cfg (1.1), multi_cta-prod2-muon-LST.cfg (1.1), multi_cta-prod2-muon-MST.cfg (1.1), multi_cta-trg-test-prod2-LST4.cfg (1.1), multi_cta-ultra3-LST.cfg (1.1), multi_cta-ultra3-LST4.cfg (1.1), multi_cta-ultra3-MST.cfg (1.1), multi_cta-ultra3-MST4.cfg (1.1) (utags: prod-3-initial, prod5, prod6beta1): Add some less-used multipipe_corsika configurations. 2014-10-28 15:55 bernlohr * common/: sim_config.c (1.114), sim_signal.c (1.65): Fix setting up the telescopes with number of gains configured at run time. 2014-10-28 15:53 bernlohr * doc_src/sim_hessarray.tex (1.48): Describe new parameters. 2014-10-28 15:52 bernlohr * cfg/CTA/CTA-ULTRA5-medium-sc.cfg (1.6): Add optional hole in secondary and add a few comments after checking with Akira. 2014-10-28 15:49 bernlohr * hess/hess_defaults.h (1.84): Delete obsolete (and previously commented-out) parameters. 2014-10-28 15:48 bernlohr * rx.cc (1.3, prod-3-initial): Output printed with larger numerical precision. 2014-10-13 17:53 bernlohr * cfg/CTA/CTA-ULTRA5-large.cfg (1.13), cfg/CTA/CTA-ULTRA5-medium-sc.cfg (1.5), cfg/CTA/CTA-ULTRA5-medium.cfg (1.14), cfg/CTA/CTA-ULTRA5-sites.cfg (1.3), cfg/CTA/CTA-ULTRA5-small-4m-dc.cfg (1.8, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-small-astri.cfg (1.7, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.16), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.17), common/mc_aux.h (1.112), common/sim_config.c (1.113), common/sim_signal.c (1.64), hess/hess_defaults.h (1.83), hess/sim_conv2hess.c (1.92): Allow for differing number of gains per PMT for different telescope types in the same simulation, controlled by a new configuration parameter NUM_GAINS. 2014-09-30 18:59 bernlohr * cfg/hess2/hess2_dish.cfg (1.6): Fix telescope transmission of CT5 for phase2b* simulations to 92.5 percent. Should be compensated by lowering the optical efficiency correspondingly (resulting in no net effect). Since the actual optical efficiency seems to be a bit higher than assumed so far, that compensation is not used. Therefore this change increases the CT5 optical efficiency effectively by more than three percent. 2014-08-18 15:11 bernlohr * cfg/hess2/hess-phase2.cfg (1.4): Do not use the reduced CT1-4 pixel threshold for phase2 simulations beyond phase2a80 ... 2014-07-09 17:30 bernlohr * common/: sim_config.c (1.112), sim_imaging.c (1.54): Optional extended ray-tracing output for dual-mirror optics. 2014-06-23 13:27 bernlohr * sim_hessarray.dox (1.6, prod-3-initial), hess/Makefile.hess (1.120): Add more documentation to exported tar packages. 2014-06-23 12:30 bernlohr * Copyright (1.3), hess/Makefile.hess (1.119): Prepare for providing configuration and data files explicitly under terms of cc-by-sa-4.0. 2014-06-12 13:28 bernlohr * corsika/: README (1.61), README.tex (1.54): Update README file. 2014-05-26 15:02 bernlohr * cfg/common/ref_dielectric500.dat (1.3, prod6beta1, prod5, prod-3-initial): Add comment on how this file was derived from ref_dielectric550.dat. 2014-05-26 15:01 bernlohr * common/sim_imaging.c (1.53): Fix a numerical stability problem for incoming rays within micro-arcseconds of the optical axis. 2014-05-23 15:24 bernlohr * cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.16): Change an error message into a warning, such that we test the ray-tracing etc. also with sim_telarray compiled with -DCTA_MAX_SC. 2014-05-08 16:19 bernlohr * testeff.c (1.24): Add option to get output at nanometer sampling instead of 10 nm. 2014-05-07 15:18 bernlohr * common/: io_pixel.c (1.2, prod6beta1, prod5, prod-3-initial), sim_config.c (1.111): Get rid of some cppcheck warnings. 2014-04-23 14:03 bernlohr * common/sim_telarray.c (1.99): Add the EXTRA_CLOUD option for quick-and-dirty simulation of extra aerosol/cloud layers. 2014-03-21 17:06 bernlohr * doc_src/sim_hessarray.tex (1.47): And a few non-ASCII (UTF8?) characters fixed. 2014-03-21 16:59 bernlohr * doc_src/sim_hessarray.tex (1.46): Tweaking the behaviour of underscores. 2014-03-20 18:02 bernlohr * doc_src/sim_hessarray.tex (1.45): Filling in description of undocumented configuration parameters. 2014-03-20 16:00 bernlohr * hess/Makefile.hess (1.118): Export also new transmission tables for HESS site with corrected altitude. 2014-03-20 15:59 bernlohr * generic_run.sh (1.24): Support phase2b1 HESS simulation configuration. 2014-03-20 15:58 bernlohr * common/sim_config.c (1.110), hess/hess_defaults.h (1.82): Add option for common NSB scaling factor which can be applied to multiple telescope types. 2014-03-17 16:38 bernlohr * cfg/hess/: atm_trans_1835_1_0_0_0_1835.dat (1.1), atm_trans_1835_1_10_0_0_0.dat (1.1), atm_trans_1835_1_10_0_0_1835.dat (1.1), atm_trans_1835_1_1_0_0_0.dat (1.1), atm_trans_1835_1_1_0_0_1835.dat (1.1), atm_trans_1835_1_3_0_0_0.dat (1.1), atm_trans_1835_1_3_0_0_1835.dat (1.1), atm_trans_1835_1_4_0_0_0.dat (1.1), atm_trans_1835_1_4_0_0_1835.dat (1.1), atm_trans_1835_1_6_0_0_1835.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Transmission files for updated altitude of HESS site. 2014-03-17 16:19 bernlohr * cfg/hess/hess_bestguess.cfg (1.31): A few more tweaks for phase2b1. 2014-03-13 20:44 bernlohr * cfg/hess2/hessII-mirrors-0876-installed.dat (1.3, prod6beta1, phase2d3, prod5, prod-3-initial): Fine-tuning mirror positions. 2014-03-13 20:13 bernlohr * Mirrors/draw_mirrors.c (1.6), cfg/hess/hess_bestguess.cfg (1.30), cfg/hess2/hess2_common.cfg (1.2, prod-3-initial), cfg/hess2/hess2_dish.cfg (1.5), cfg/hess2/hessII-mirrors-0876-installed.dat (1.2): Update optical parameters for phase2b1 configuration. 2014-03-11 17:26 bernlohr * common/: mc_aux.h (1.111), sim_telarray.c (1.98): Fine-tune the CTA_MAX_SC version. 2014-03-11 17:25 bernlohr * generic_run.sh (1.23): Fix old examples 2014-02-26 16:55 bernlohr * corsika/: README (1.60), README.tex (1.53), gen_config (1.12, prod-3-initial), iact.c (1.81), iact_full5.c (1.82): Working on compatibility with CORSIKA 7.400. 2014-02-26 15:16 bernlohr * util/corsika_autoinputs.cc (1.11): Create symlinks also for files from CORSIKA version 7.x. 2014-02-25 16:50 bernlohr * corsika/trapfpe.c (1.2, prod6beta1, prod5, prod-3-initial): More modern version of trapping floating-point exceptions, also working on 64-bit architectures. 2014-02-20 12:57 bernlohr * testeff.c (1.23), common/absorb.h (1.5), common/mc_aux.h (1.110), common/rndm_table.c (1.6, prod-3-initial), common/sim_absorb.c (1.16), common/sim_config.c (1.109), common/sim_imaging.c (1.52), common/sim_telarray.c (1.97), corsika/atmo.c (1.16, prod-3-initial), corsika/sampling.h (1.2, prod-3-initial), hess/sim_conv2hess.c (1.91), util/extract_corsika_tel.c (1.3), util/multipipe_corsika.c (1.15), util/tree.h (1.3, prod-3-initial): Should be compatible with compilation by C++ compiler once again. 2014-01-27 18:06 bernlohr * corsika/: Makefile.dist (1.58, prod-3-initial), README (1.59), README.tex (1.52), corsika-6990.patch (1.3, prod-3-initial), corsika-7370.patch (1.1, prod-3-initial): With patch for CORSIKA 7.370 like that for 6.990. 2014-01-27 17:35 bernlohr * corsika/: Makefile.dist (1.57), README (1.58), README.tex (1.51), iact.c (1.80), iact_full5.c (1.81): Starting with version 1.48: dropping support for CORSIKA before 6.500. 2014-01-27 15:02 bernlohr * corsika/: Makefile.dist (1.56), README (1.57), README.tex (1.50): Update README file and include corsika_build_script in distribution. 2014-01-27 14:38 bernlohr * corsika/gen_config (1.11): Include experimental support for CORSIKA versions 7.3xx and 7.4xx. 2013-12-20 16:28 bernlohr * hess/hess_defaults.h (1.81): Fix typo in minimal value. 2013-12-17 15:36 bernlohr * cfg/: CTA/atm_trans_2000_1_10_0_0_2000.dat (1.3), common/atm_trans_0_1_10_0_0_0.dat (1.3), common/atm_trans_1000_1_10_0_0_1000.dat (1.3), common/atm_trans_1500_1_10_0_0_1500.dat (1.3), common/atm_trans_1630_1_10_0_0_1630.dat (1.3), common/atm_trans_1640_1_0_0_0_1640.dat (1.3), common/atm_trans_1640_1_10_0_0_1640.dat (1.3), common/atm_trans_1650_1_10_0_0_1650.dat (1.3), common/atm_trans_1655_1_10_0_0_1655.dat (1.3), common/atm_trans_1655_2_10_0_0_1655.dat (1.3), common/atm_trans_1680_1_10_0_0_1680.dat (1.3), common/atm_trans_1800_1_10_0_0_1800.dat (1.3), common/atm_trans_2000_1_10_0_0_2000.dat (1.3), common/atm_trans_2200_1_0_0_0_2200.dat (1.3), common/atm_trans_2200_1_10_0_0_2200.dat (1.3), common/atm_trans_2200_1_3_0_0_0.dat (1.3), common/atm_trans_2290_1_10_0_0_2290.dat (1.3), common/atm_trans_2290_1_3_0_0_0.dat (1.2), common/atm_trans_2400_1_10_0_0_2400.dat (1.3), common/atm_trans_2434_1_10_0_0_2434.dat (1.3), common/atm_trans_2434_2_10_0_0_2434.dat (1.3), common/atm_trans_2500_1_10_0_0_2500.dat (1.3), common/atm_trans_2600_1_10_0_0_2600.dat (1.3), common/atm_trans_2662_1_0_0_0_2662.dat (1.3), common/atm_trans_2662_1_10_0_0_2662.dat (1.3), common/atm_trans_3000_1_10_0_0_3000.dat (1.3), common/atm_trans_3500_1_10_0_0_3500.dat (1.3), common/atm_trans_3600_1_0_0_0_3600.dat (1.3), common/atm_trans_3600_1_10_0_0_3600.dat (1.3), common/atm_trans_3700_1_10_0_0_3700.dat (1.3), common/atm_trans_4000_1_10_0_0_4000.dat (1.3), common/atm_trans_4500_1_10_0_0_4500.dat (1.3), common/atm_trans_5000_1_10_0_0_5000.dat (1.3), common/atm_trans_500_1_10_0_0_500.dat (1.3), common/atm_trans_5500_1_10_0_0_5500.dat (1.3), hess/atm_trans_1800_1_10_0_0_0.dat (1.4), hess/atm_trans_1800_1_10_0_0_1800.dat (1.4), hess/atm_trans_1800_1_1_0_0_0.dat (1.4), hess/atm_trans_1800_1_1_0_0_1800.dat (1.4), hess/atm_trans_1800_1_3_0_0_0.dat (1.4), hess/atm_trans_1800_1_3_0_0_1800.dat (1.4), hess/atm_trans_1800_1_4_0_0_0.dat (1.4), hess/atm_trans_1800_1_4_0_0_1800.dat (1.4), hess5000/atm_trans_5000.dat (1.3), hess5000/atm_trans_5000_1_10_0_0_2000.dat (1.3), hess5000/atm_trans_5000_1_1_0_0_5000.dat (1.3), hess5000/atm_trans_5000_1_6_0_0_5000.dat (1.3) (utags: prod-3-initial, prod5, prod6beta1): Another transmission table update with more altitude levels (not that those for low-altitude sites have now more than 40 levels). 2013-12-17 14:38 bernlohr * common/sim_absorb.c (1.15): Actually enabling the use of atmospheric transmissions beyond 700 nm. 2013-12-17 14:36 bernlohr * corsika/GNUmakefile (1.35, prod-3-initial): Clarifying a comment. 2013-12-12 16:35 bernlohr * corsika/: GNUmakefile (1.34), atmo.c (1.15): Optional main function added to atmo.c can turn it into a useful utility program. 2013-12-10 17:13 bernlohr * cfg/: common/atm_trans_2290_1_3_0_0_0.dat (1.1), hess5000/atm_trans_5000.dat (1.2): A couple of transmission files which fell through the cracks at the last update. 2013-11-28 15:52 bernlohr * cfg/hess2/hess2_dish.cfg (1.4): Use list of actually installed mirrors. 2013-11-28 15:46 bernlohr * cfg/: CTA/atm_trans_2000_1_10_0_0_2000.dat (1.2), common/atm_trans_0_1_10_0_0_0.dat (1.2), common/atm_trans_1000_1_10_0_0_1000.dat (1.2), common/atm_trans_1500_1_10_0_0_1500.dat (1.2), common/atm_trans_1630_1_10_0_0_1630.dat (1.2), common/atm_trans_1640_1_0_0_0_1640.dat (1.2), common/atm_trans_1640_1_10_0_0_1640.dat (1.2), common/atm_trans_1650_1_10_0_0_1650.dat (1.2), common/atm_trans_1655_1_10_0_0_1655.dat (1.2), common/atm_trans_1655_2_10_0_0_1655.dat (1.2), common/atm_trans_1680_1_10_0_0_1680.dat (1.2), common/atm_trans_1800_1_10_0_0_1800.dat (1.2), common/atm_trans_2000_1_10_0_0_2000.dat (1.2), common/atm_trans_2200_1_0_0_0_2200.dat (1.2), common/atm_trans_2200_1_10_0_0_2200.dat (1.2), common/atm_trans_2200_1_3_0_0_0.dat (1.2), common/atm_trans_2290_1_10_0_0_2290.dat (1.2), common/atm_trans_2400_1_10_0_0_2400.dat (1.2), common/atm_trans_2434_1_10_0_0_2434.dat (1.2), common/atm_trans_2434_2_10_0_0_2434.dat (1.2), common/atm_trans_2500_1_10_0_0_2500.dat (1.2), common/atm_trans_2600_1_10_0_0_2600.dat (1.2), common/atm_trans_2662_1_0_0_0_2662.dat (1.2), common/atm_trans_2662_1_10_0_0_2662.dat (1.2), common/atm_trans_3000_1_10_0_0_3000.dat (1.2), common/atm_trans_3500_1_10_0_0_3500.dat (1.2), common/atm_trans_3600_1_0_0_0_3600.dat (1.2), common/atm_trans_3600_1_10_0_0_3600.dat (1.2), common/atm_trans_3700_1_10_0_0_3700.dat (1.2), common/atm_trans_4000_1_10_0_0_4000.dat (1.2), common/atm_trans_4500_1_10_0_0_4500.dat (1.2), common/atm_trans_5000_1_10_0_0_5000.dat (1.2), common/atm_trans_500_1_10_0_0_500.dat (1.2), common/atm_trans_5500_1_10_0_0_5500.dat (1.2), hess/atm_trans_1800_1_10_0_0_0.dat (1.3), hess/atm_trans_1800_1_10_0_0_1800.dat (1.3), hess/atm_trans_1800_1_1_0_0_0.dat (1.3), hess/atm_trans_1800_1_1_0_0_1800.dat (1.3), hess/atm_trans_1800_1_3_0_0_0.dat (1.3), hess/atm_trans_1800_1_3_0_0_1800.dat (1.3), hess/atm_trans_1800_1_4_0_0_0.dat (1.3), hess/atm_trans_1800_1_4_0_0_1800.dat (1.3), hess5000/atm_trans_5000_1_10_0_0_2000.dat (1.2), hess5000/atm_trans_5000_1_1_0_0_5000.dat (1.2), hess5000/atm_trans_5000_1_6_0_0_5000.dat (1.2): Recalculated atmospheric transmission files with more intermediate altitude levels and extending the wavelength range from 714 nm to 999 nm. 2013-09-17 15:40 bernlohr * cfg/common/Benn_LaPalma_sky_converted.lis (1.3, prod-3-initial): Adding a few comments on other units occasionally used for NSB brightness. 2013-09-13 16:48 bernlohr * util/multipipe_corsika.c (1.14): Fix format for printing the CORSIKA_OBSLEV output to avoid a blank below 9 m site altitude. 2013-08-06 15:10 bernlohr * hess/Makefile.hess (1.117): Fix typo in exported file name. 2013-08-06 15:08 bernlohr * hess/Makefile.hess (1.116): Also export a 'navy-maritime, ground level zero' transmission file for Tenerife. 2013-08-02 17:39 bernlohr * common/mc_aux.h (1.109), common/sim_config.c (1.108), common/sim_signal.c (1.63), common/sim_telarray.c (1.96), hess/hess_defaults.h (1.80), hess/sim_conv2hess.c (1.90): Allow more options to configure PMT transit delays and possible ways to compensate for those through programmable delays or in readout. 2013-07-22 16:08 bernlohr * generic_run.sh (1.22), cfg/CTA/CTA-ULTRA5N.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/array_trigger_ultra5.dat (1.3, prod6beta1, prod5, prod-3-initial), cfg/CTA/array_trigger_ultra5_extra.dat (1.5, prod6beta1, prod5, prod-3-initial), cfg/CTA/array_trigger_ultra5_north.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.115), multi/multi_cta-ultra5n.cfg (1.1, prod6beta1, prod5, prod-3-initial): Add configuration for a reduced prod-2 northern array. 2013-07-22 16:07 bernlohr * common/sim_config.c (1.107): If array trigger entries are comma-separated rather than by blanks, convert commas to blanks first. 2013-07-17 10:55 bernlohr * multi/multi_cta-ultra5.cfg (1.3): Add (commented-out) lines for other configurations used in prod-2. 2013-07-16 17:23 bernlohr * corsika/corsika-6990.patch (1.2): Since build_all scripts uses '-p1' option to patch, better take care of that. 2013-07-16 17:02 bernlohr * corsika/corsika-6990.patch (1.1): Get the charge sign from electrons/positrons with IACTEXT option. 2013-07-16 16:59 bernlohr * corsika/: Makefile.dist (1.55), iact.c (1.79), iact_full5.c (1.80): Extend histograms available in extended version. 2013-06-25 13:55 bernlohr * hess/sim_conv2hess.c (1.89): Add extra trigger information to camera organisation block. 2013-06-19 18:31 bernlohr * hess/Makefile.hess (1.114): Export additional atmospheric density profiles and extinction tables. 2013-06-19 18:31 bernlohr * util/extract_corsika_tel.c (1.2): Print CORSIKA_* environment variables to stdout only with --header-only. 2013-06-19 18:16 bernlohr * hess/sim_conv2hess.c (1.88): Fix bug in storing the trigger type mask. 2013-06-19 14:16 bernlohr * cfg/common/camera_7pixel.dat (1.1, prod-3-initial): Adding a camera definition for a 7-pixel module, used for trigger studies. 2013-06-19 14:15 bernlohr * cfg/common/: atm_trans_1630_1_10_0_0_1630.dat (1.1), atm_trans_1640_1_0_0_0_1640.dat (1.1), atm_trans_1650_1_10_0_0_1650.dat (1.1), atm_trans_1655_1_10_0_0_1655.dat (1.1), atm_trans_1655_2_10_0_0_1655.dat (1.1), atm_trans_1680_1_10_0_0_1680.dat (1.1), atm_trans_2200_1_0_0_0_2200.dat (1.1), atm_trans_2290_1_10_0_0_2290.dat (1.1), atm_trans_2400_1_10_0_0_2400.dat (1.1), atm_trans_2434_1_10_0_0_2434.dat (1.1), atm_trans_2434_2_10_0_0_2434.dat (1.1), atm_trans_2600_1_10_0_0_2600.dat (1.1), atm_trans_2662_1_0_0_0_2662.dat (1.1), atm_trans_3600_1_0_0_0_3600.dat (1.1): More atmospheric transmission tables for potential CTA sites. 2013-06-18 15:27 bernlohr * cfg/CTA/: CTA-ULTRA5-small-astri.cfg (1.6), CTA-ULTRA5-small-dc.cfg (1.15), CTA-ULTRA5-small-sc.cfg (1.15): Config files for SST-only part of prod-2 simulation (as used for Leoncito and SAC but forgotten to check in again). 2013-06-18 15:24 bernlohr * cfg/CTA/: atmprof25.dat (1.1), atmprof26.dat (1.1), atmprof27.dat (1.1), atmprof31.dat (1.1), atmprof33.dat (1.1), atmprof34.dat (1.1), atmprof28.dat (1.1), atmprof32.dat (1.1), atmprof35.dat (1.1), atmprof36.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding more atmospheric profiles from NRLMSIS-00 model. 2013-05-08 12:13 bernlohr * cfg/CTA/cta_funnels_SiPM_4m-dc.dat (1.3, prod6beta1, prod5, prod-3-initial): Slightly more efficient new funnel version. 2013-05-08 12:00 bernlohr * cfg/hess5000/atm_trans_5000_1_10_0_0_5000.dat (1.2): There is a slightly different and newer version in common. 2013-05-08 11:53 bernlohr * cfg/CTA/camera_CTA_SiPM_4m-dc.dat (1.2, prod6beta1, prod5, prod-3-initial): Just differs in comments. 2013-05-07 17:35 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.12), CTA-ULTRA5-medium-sc.cfg (1.4), CTA-ULTRA5-medium.cfg (1.13), CTA-ULTRA5-small-4m-dc.cfg (1.7), CTA-ULTRA5-small-astri.cfg (1.5), CTA-ULTRA5-small-dc.cfg (1.14): Last-minute small changes to various trigger thresholds. 2013-05-06 11:07 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.11), CTA-ULTRA5-medium.cfg (1.12), CTA-ULTRA5-small-astri.cfg (1.4), CTA-ULTRA5-small-dc.cfg (1.13): Configuration updates (analog sum thresholds for LST/MST/7m-SST), plus small changes for ASTRI. 2013-05-03 19:51 bernlohr * cfg/CTA/: CTA-ULTRA5-common.cfg (1.3), CTA-ULTRA5-medium-sc.cfg (1.3), CTA-ULTRA5-small-4m-dc.cfg (1.6), CTA-ULTRA5-small-astri.cfg (1.3), CTA-ULTRA5-small-dc.cfg (1.12), CTA-ULTRA5-small-sc.cfg (1.14): Config files getting closer to final for CTA prod2 reproduction but still new analog sum values missing and ASTRI config not up-to-date. 2013-04-30 16:53 bernlohr * .cvsignore (1.2, prod-3-initial), cfg/CTA/CTA-ULTRA5-common.cfg (1.2), cfg/CTA/CTA-ULTRA5-large.cfg (1.10), cfg/CTA/CTA-ULTRA5-medium-sc.cfg (1.2), cfg/CTA/CTA-ULTRA5-medium.cfg (1.11), cfg/CTA/CTA-ULTRA5-sites.cfg (1.2), cfg/CTA/CTA-ULTRA5-small-4m-dc.cfg (1.5), cfg/CTA/CTA-ULTRA5-small-astri.cfg (1.2), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.11), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.13), cfg/CTA/CTA-ULTRA5.cfg (1.16): Update prod-2 config files, with ASTRI config not complete yet. 2013-04-29 19:34 bernlohr * generic_run.sh (1.21): Set up simulations of SC-MSTs, of 4m-DC telescopes, or of ASTRI telescopes. 2013-04-29 19:33 bernlohr * Mirrors/draw_mirrors.c (1.5): Fix plotting of the camera body on top of the mirrors. 2013-04-29 19:32 bernlohr * hess/Makefile.hess (1.113): Splitting the configuration files off into a second tar file. 2013-04-29 19:31 bernlohr * hess/sim_conv2hess.c (1.87): Recent change to avoid warnings (when no output file is open) needs another condition to work. 2013-04-29 19:27 bernlohr * common/sim_signal.c (1.62): Fix NSB dependend shift in analog sum (mean NSB current decoupled). 2013-04-26 17:18 bernlohr * Mirrors/: conical_taylor.cc (1.1), csv2mlist.cc (1.1, prod6beta1, prod5), duo.cc (1.1, prod6beta1, prod5) (utags: prod-3-initial): Adding a couple of old files to CVS. 2013-04-25 17:32 bernlohr * hess/sim_conv2hess.c (1.86): Avoid unnecessary warning when no output file is to be written. 2013-04-24 16:56 bernlohr * common/sim_telarray.c (1.95): Properly report compiled-in CTA_SC option. 2013-04-17 19:38 bernlohr * hess/Makefile.hess (1.112): Add one more data file to export to tar file. 2013-04-17 17:07 bernlohr * cfg/CTA/CTA-ULTRA5-small-astri.cfg (1.1): One more file not yet in CVS. 2013-04-17 17:04 bernlohr * hess/Makefile.hess (1.111): Include contributed material in tar file export. 2013-04-17 16:51 bernlohr * cfg/CTA/: CTA-ULTRA5-common.cfg (1.1), CTA-ULTRA5-medium-sc.cfg (1.1), CTA-ULTRA5-sites.cfg (1.1), CTA-ULTRA5-small-4m-dc.cfg (1.4), CTA-ULTRA5.cfg (1.15), cta_funnels_SiPM_4m-dc.dat (1.2), spe_FACT.dat (1.2, prod6beta1, prod5, prod-3-initial): Split off a few common configuration files for ULTRA5 and re-use them with the SC-MST setup for prod-2. Also fix carriage-returns in data files. 2013-04-17 16:42 bernlohr * cfg/common/atm_trans_3600_1_10_0_0_3600.dat (1.1): Starting point for atmospheric transmission at San Antonio de los Cobres (SAC), for example. 2013-04-17 13:15 bernlohr * cfg/CTA/CTA-ULTRA5-small-4m-dc.cfg (1.3): With NSB and digital sum threshold values as given by project group. Threshold still needs to be cross-checked though. 2013-04-17 12:25 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.9), CTA-ULTRA5-medium.cfg (1.10), CTA-ULTRA5-small-4m-dc.cfg (1.2), CTA-ULTRA5-small-dc.cfg (1.10), CTA-ULTRA5-small-sc.cfg (1.12), CTA-ULTRA5.cfg (1.14): Updating CTA configuration files for normal prod-2. 2013-04-17 12:24 bernlohr * common/mc_aux.h (1.108), common/sim_config.c (1.106), common/sim_telarray.c (1.94), hess/hess_defaults.h (1.79), hess/sim_conv2hess.c (1.85): Adding options to limit the number of events to be processed, plus small changes in reporting the version of sim_telarray (plus also checking the sim_telarray and libhessio are compiled consistently, before going into actual simulations - which is useful for the autmated build tests). 2013-04-17 12:19 bernlohr * build_test (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.110): Add automated build tests for all common configurations. 2013-03-19 16:15 bernlohr * cfg/common/: Benn_LaPalma_sky_converted.lis (1.2), Benn_LaPalma_sky_fnu.lis (1.2, prod6beta1, prod5, prod-3-initial): Changing the extrapolation in the UV a bit. Adding comments on other sources of NSB in the converted file. 2013-03-08 17:58 bernlohr * generic_run.sh (1.20): Fix a bug that resulted in setting a telescope-type independent pixel threshold onto the command line for prod-2 simulations. 2013-03-08 17:56 bernlohr * corsika/iact_full5.c (1.79): Optionally fill histograms with lateral distribution of Cherenkov light at many different altitudes. 2013-02-27 19:23 bernlohr * corsika/GNUmakefile (1.33): Linking the testio and listio program these days may require the math library. 2013-02-27 19:05 bernlohr * common/: sim_config.c (1.105), sim_telarray.c (1.93): Fix problems when input data is split and there are more telescopes in that data than are used. Also take more care with split input data when writing a separate photo-electron file. 2013-02-27 18:50 bernlohr * corsika/: Makefile.dist (1.54), README (1.56), README.tex (1.49), corsika.dox (1.21), iact.c (1.78), iact_full5.c (1.78): Add extra log output at startup to show all IACT module parameters as used. Increase version to 1.47 2013-02-26 18:14 bernlohr * hess/Makefile.hess (1.109), util/extract_corsika_tel.c (1.1): Add utility for extracting data for specific telescopes from CORSIKA output. 2013-02-26 18:10 bernlohr * cfg/hess2/: hess2_shadow_camera_body.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2_shadow_camera_mount.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2_shadow_camera_support.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2_shadow_legs.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2_shadow_trusses.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0876-installed.dat (1.1), hessII-mirrors-0879-installed.dat (1.2, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0954-n.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0954-r.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial): Add various files still sitting around from technical studies for HESS-II. 2013-02-22 18:10 bernlohr * common/sim_telarray.c (1.92): Report a few more compiler definitions used for setting up limits. 2013-02-22 18:09 bernlohr * common/mc_aux.h (1.107): Rewrite definition of limits for different CTA simulations. 2013-02-13 17:50 bernlohr * Cameras/mapmtpix.cc (1.2), common/sim_signal.c (1.61): Fixing a typo (compilation failed). 2013-02-13 15:20 bernlohr * common/: mc_aux.h (1.106), sim_signal.c (1.60): Add configuration variant with a huge number of pixels for a few telescopes. Unfortunately, the linker comes with relocation errors when using more than some 200+x thousand pixels. 2013-02-01 13:00 bernlohr * testeff.c (1.22): Show altitudes with more digits. 2013-01-28 17:02 bernlohr * cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.11), hess/Makefile.hess (1.108): The V17OPTICS flag not only selects the J.S. v17 optics solution but also the CHEC camera at true MaPMT pixel size. 2013-01-28 16:40 bernlohr * common/sim_signal.c (1.59): If the single-p.e. response average is far from 1.0, raise an error condition. 2013-01-28 16:07 bernlohr * common/sim_signal.c (1.58): Add a check for proper normalization of the single-p.e. distribution. 2013-01-28 12:14 bernlohr * cfg/CTA/pulse_CTA-Fx.dat (1.2): This file should not include a '# T=' line but was safe to be used as a discriminator_pulse_shape (as in ULTRA5 configs). 2013-01-21 16:12 bernlohr * corsika/inputs_examples/: INPUTS_41Tel (1.1), INPUTS_CTA-trg-test-LST4_gamma (1.1), INPUTS_CTA-trg-test-LST4_proton (1.1), INPUTS_CTA-trg-test-LST_gamma (1.1), INPUTS_CTA-trg-test-LST_proton (1.1), INPUTS_CTA-trg-test-MST4_gamma (1.1), INPUTS_CTA-trg-test-MST4_proton (1.1), INPUTS_CTA-trg-test-MST_gamma (1.1), INPUTS_CTA-trg-test-MST_proton (1.1), INPUTS_CTA-trg-test-prod2-DC-SST4_proton (1.1), INPUTS_CTA-trg-test-prod2-DC-SST_proton (1.1), INPUTS_CTA-trg-test-prod2-LST4_proton (1.1), INPUTS_CTA-trg-test-prod2-LST_proton (1.1), INPUTS_CTA-trg-test-prod2-MST4_proton (1.1), INPUTS_CTA-trg-test-prod2-MST_proton (1.1), INPUTS_CTA-trg-test-prod2-SC-SST4_proton (1.1), INPUTS_CTA-trg-test-prod2-SC-SST_proton (1.1), INPUTS_CTA-ultra3-LST4_gamma (1.1), INPUTS_CTA-ultra3-LST4_proton (1.1), INPUTS_CTA-ultra3-LST_gamma (1.1), INPUTS_CTA-ultra3-LST_proton (1.1), INPUTS_CTA-ultra3-MST4_gamma (1.1), INPUTS_CTA-ultra3-MST4_proton (1.1), INPUTS_CTA-ultra3-MST_gamma (1.1), INPUTS_CTA-ultra3-MST_proton (1.1), INPUTS_CTA_HE_electron (1.1), INPUTS_CTA_HE_gamma (1.1), INPUTS_CTA_HE_proton (1.1), INPUTS_CTA_PROD2_electron_North (1.1), INPUTS_CTA_PROD2_electron_South (1.1), INPUTS_CTA_PROD2_gamma_North (1.1), INPUTS_CTA_PROD2_gamma_South (1.1), INPUTS_CTA_PROD2_gamma_diffuse_North (1.1), INPUTS_CTA_PROD2_gamma_diffuse_South (1.1), INPUTS_CTA_PROD2_helium_North (1.1), INPUTS_CTA_PROD2_helium_South (1.1), INPUTS_CTA_PROD2_iron_North (1.1), INPUTS_CTA_PROD2_iron_South (1.1), INPUTS_CTA_PROD2_nitrogen_North (1.1), INPUTS_CTA_PROD2_nitrogen_South (1.1), INPUTS_CTA_PROD2_proton_North (1.1), INPUTS_CTA_PROD2_proton_South (1.1), INPUTS_CTA_PROD2_silicon_North (1.1), INPUTS_CTA_PROD2_silicon_South (1.1), INPUTS_CTA_ULTRA1_electron (1.1), INPUTS_CTA_ULTRA1_gamma (1.1), INPUTS_CTA_ULTRA1_proton (1.1), INPUTS_CTA_ULTRA2_electron (1.1), INPUTS_CTA_ULTRA2_gamma (1.1), INPUTS_CTA_ULTRA2_proton (1.1), INPUTS_CTA_ULTRA3_electron (1.1), INPUTS_CTA_ULTRA3_electron_50deg (1.1), INPUTS_CTA_ULTRA3_gamma (1.1), INPUTS_CTA_ULTRA3_gamma_50deg (1.1), INPUTS_CTA_ULTRA3_gamma_diffuse (1.1), INPUTS_CTA_ULTRA3_helium (1.1), INPUTS_CTA_ULTRA3_iron (1.1), INPUTS_CTA_ULTRA3_nitrogen (1.1), INPUTS_CTA_ULTRA3_proton (1.1), INPUTS_CTA_ULTRA3_proton_50deg (1.1), INPUTS_CTA_ULTRA3_silicon (1.1), INPUTS_CTA_ULTRA3i_gamma (1.1), INPUTS_CTA_ULTRA3i_gamma_diffuse (1.1), INPUTS_CTA_ULTRA3i_helium (1.1), INPUTS_CTA_ULTRA3i_iron (1.1), INPUTS_CTA_ULTRA3i_nitrogen (1.1), INPUTS_CTA_ULTRA3i_proton (1.1), INPUTS_CTA_ULTRA3i_silicon (1.1), INPUTS_CTA_test (1.1), INPUTS_cta_run20974 (1.1), INPUTS_example_for_HESS (1.1), INPUTS_hess41_run15158 (1.1), INPUTS_phase3_run19287 (1.1) (utags: prod-3-initial, prod5, prod6beta1): Put example input files under version control. 2013-01-18 16:16 bernlohr * cfg/CTA/camera_CHEC_GATE.dat (1.1): Add a MaPMT camera variant scaled back to actual pixel sizes at the focal length of a GATE telescopes. 2013-01-14 20:11 bernlohr * cfg/CTA/CTA-ULTRA5-dsum_shaping_SiPM.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-ULTRA5-small-4m-dc.cfg (1.1), cfg/CTA/CTA-ULTRA5.cfg (1.13), cfg/CTA/camera_CTA_SiPM_4m-dc.dat (1.1), cfg/CTA/cta_funnels_SiPM_4m-dc.dat (1.1), cfg/CTA/mirror_DC4m_78cm_s2cm_f5.600_nocent.dat (1.1, prod-3-initial), cfg/CTA/pulse_GAPD.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/qe_S10985-050C.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/qe_S10985-050C_scaled0.7.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/spe_FACT.dat (1.1), cfg/common/ref_dielectric500.dat (1.2), cfg/common/ref_dielectric550.dat (1.2, prod6beta1, prod5, prod-3-initial), common/sim_absorb.c (1.14), common/sim_config.c (1.104), common/sim_telarray.c (1.91), hess/Makefile.hess (1.107), multi/multi_cta-ultra5.cfg (1.2): Supporting optional alternate prod-2 chain with 4m DC-SSTs in place of SC-SSTs. Default behaviour as for prod-2 initial release. 2012-12-21 11:47 bernlohr * cfg/CTA/CTA-ULTRA5.cfg (1.12): Fixing the store_photoelectrons setting which should now be before and not after the telescope-type-specific configuration files get processed. 2012-12-20 20:21 bernlohr * cfg/CTA/CTA-ULTRA5-medium.cfg (1.9), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.9), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.10), common/mc_aux.h (1.105), common/sim_config.c (1.103), common/sim_telarray.c (1.90): The 'store_photoelectrons' value can now be used with a value individual to each telescope (type), and should typically be lower for telescope types with lower NSB pixel rates. 2012-12-20 20:19 bernlohr * generic_run.sh (1.19): Adapt script to modified layout of extra telescopes. 2012-12-20 19:07 bernlohr * cfg/CTA/CTA-ULTRA5.cfg (1.11): Adapting the Prod-2 top-level telescope configuration to additional LSTs and MSTs. 2012-12-20 18:51 bernlohr * cfg/CTA/: pmt_specs_R11920.cfg (1.4), pmt_specs_R9420.cfg (1.5) (utags: prod-3-initial, prod5, prod6beta1): Small reduction in transit time jitter for R11920. Setting proper value for older R9420 file (not used anymore). 2012-12-20 18:49 bernlohr * cfg/CTA/array_trigger_ultra5_extra.dat (1.4): Adapting to modified CORSIKA inputs files (with 56 additional SCT/MST positions). 2012-12-17 13:08 bernlohr * common/mc_aux.h (1.104): Allow for some last-minute addition of MST/SCT positions. 2012-12-17 13:05 bernlohr * generic_run.sh (1.18): Increasing number of telescopes normally in prod-2. 2012-12-17 13:04 bernlohr * cfg/CTA/: array_trigger_ultra5.dat (1.2), array_trigger_ultra5_extra.dat (1.3): Fixing 3-LST combination (telescopes 2, 3, and 5). 2012-12-14 12:28 bernlohr * cfg/CTA/CTA-ULTRA5.cfg (1.10), cfg/CTA/array_trigger_ultra5_extra.dat (1.2), cfg/CTA/camera_CHEC.dat (1.3, prod6beta1, prod5, prod-3-initial), cfg/CTA/mirror_v17.dat (1.2, prod6beta1, prod5, prod-3-initial), common/mc_aux.h (1.103): A few more configuration fixes for CTA Prod-2. 2012-12-07 16:46 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.8), CTA-ULTRA5-medium.cfg (1.8), CTA-ULTRA5-small-dc.cfg (1.8), CTA-ULTRA5-small-sc.cfg (1.9), CTA-ULTRA5.cfg (1.9): Adapt threshold for all triggers such that the NSB random rate at twice nominal NSB is about equal to the single-telescope CR rate (evaluated as 1.5 times the proton rate). 2012-12-07 14:28 bernlohr * generic_run.sh (1.17), common/mc_aux.h (1.102): Add a few more telescopes to CTA prod-2. 2012-12-07 13:58 bernlohr * cfg/CTA/CTA-ULTRA5-large.cfg (1.7), cfg/CTA/CTA-ULTRA5-medium.cfg (1.7), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.7), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.8), cfg/CTA/CTA-ULTRA5.cfg (1.8), cfg/CTA/array_trigger_ultra5.dat (1.1), cfg/CTA/array_trigger_ultra5_extra.dat (1.1), cfg/CTA/pmt_specs_R11920.cfg (1.3), hess/Makefile.hess (1.106): Updating prod-2 configuration. 2012-12-07 13:48 bernlohr * common/sim_signal.c (1.57): More output if compiled with DEBUG_ADC or DEBUG_TRIGGER defined. 2012-11-29 15:02 bernlohr * hess/Makefile.hess (1.105): Export additional camera configuration files. 2012-11-29 15:01 bernlohr * generic_run.sh (1.16): Show more relevant environment variables at startup. 2012-11-29 14:58 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.6), CTA-ULTRA5-medium.cfg (1.6), CTA-ULTRA5-small-dc.cfg (1.6), camera_CTA-7m-DC-SST_9deg.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-7m-DC-SST_9deg_analogsum.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-7m-DC-SST_9deg_digitalsum.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-7m-DC-SST_9deg_majority.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-LST+MST_1855_analogsum.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-LST+MST_1855_digitalsum.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-LST+MST_1855_majority.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-ULTRA1-small_9deg.dat (1.3, prod6beta1, prod5, prod-3-initial), camera_CTA-ULTRA1-small_9deg_3trig.dat (1.1, prod6beta1, prod5, prod-3-initial): Change the CTA-ULTRA1-small_9deg camera configuration file back to the version as used in ULTRA3i simulations, with the recent version having all three trigger types renamed. Instead of either of these, now use a 7-pixel modular camera (similar to LST and MST) which is the minimal extension from the circular camera. For all DC telescope types offer separate camera configuration files with only one of the three trigger types, for adjusting thresholds. 2012-11-27 19:21 bernlohr * Copyright (1.2), hess/Makefile.hess (1.104): Dependencies and other targets modified in the Makfile. 2012-11-27 17:34 bernlohr * Mirrors/plot_mirrors.c (1.4): Add calculation of the average radius of mirror edges. 2012-11-27 14:13 bernlohr * testeff.c (1.21): Allow for explicit specification of shadowing factor. 2012-11-23 21:49 bernlohr * corsika/atmo.c (1.14): Allow for longer atmospheric density profiles 2012-11-23 21:21 bernlohr * hess/Makefile.hess (1.103): Exporting also new atmospheric density and transmission tables. 2012-11-23 21:20 bernlohr * cfg/common/atm_trans_1640_1_10_0_0_1640.dat (1.1): Transmission curve for Aar candidate site. 2012-11-23 21:16 bernlohr * cfg/CTA/: atmprof21.dat (1.1), atmprof22.dat (1.1), atmprof23.dat (1.1), atmprof24.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Add atmospheric density profiles for candidate sites. 2012-11-23 21:09 bernlohr * cfg/common/atm_trans_2200_1_3_0_0_0.dat (1.1): Transmission table for correction of NSB spectrum. 2012-11-23 21:06 bernlohr * hess/Makefile.hess (1.102): Export additional configuration files. 2012-11-23 21:05 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.5), CTA-ULTRA5-medium.cfg (1.5), CTA-ULTRA5-small-dc.cfg (1.5), CTA-ULTRA5.cfg (1.7), camera_CTA-LST+MST_1855.dat (1.1, prod6beta1, prod5, prod-3-initial), mirror_CTA-LST-1.51-198-0.03.dat (1.2, prod6beta1, prod5, prod-3-initial), mirror_CTA-LST-1.51-206-0.03.dat (1.3, prod6beta1, prod5, prod-3-initial): Updating configuration files for prod-2. 2012-11-23 20:45 bernlohr * testeff.c (1.20): The Benn&Ellison NSB spectrum is used with a correction for the extinction differing from that applying to the observatory on La Palma. 2012-11-23 20:43 bernlohr * Cameras/modular_camera.cc (1.3): Also compute a 'mean edge radius' with corresponding FoV. 2012-11-23 20:42 bernlohr * Mirrors/plot_mirrors.c (1.3): Rotate rather than flip in case of --xy option. 2012-11-20 13:45 bernlohr * cfg/CTA/Contributed/SCT/: 00ReadMe (1.1), CTA-HYBRID122.cfg (1.1), CTA-HYBRID61DC.cfg (1.1), CTA-HYBRID61HA.cfg (1.1), CTA-HYBRID61SC.cfg (1.1), CTA-MST-DC.cfg (1.1), CTA-MST-SC-OS10.cfg (1.1), CTA-MST-SC-OS8.cfg (1.1), angular_response_H8500C.dat (1.1), angular_response_funnels_DC.dat (1.1), angular_response_ham9420.dat (1.1), array_layout_MST61_100.dat (1.1), array_layout_MST61_130.dat (1.1), camera_CTA-DC-HYBRID1-medium_8deg.dat (1.1), camera_CTA-MST-SC-M2ND.dat (1.1), camera_CTA-MST-SC-M3ND.dat (1.1), mirror_CTA-DC-HYBRID1-100.dat (1.1), mirror_CTA-SC-OS10.dat (1.1), mirror_CTA-SC-OS8.dat (1.1), pde_hamamatsu_S10943-1071.dat (1.1), pulse_disc_hamamatsu_8500C.dat (1.1), pulse_disc_hamamatsu_8500C_w30.dat (1.1), pulse_disc_hamamatsu_9420.dat (1.1), pulse_fadc_hamamatsu_8500C.dat (1.1), pulse_fadc_hamamatsu_8500C_w30.dat (1.1), pulse_fadc_hamamatsu_9420.dat (1.1), pulse_shaped_hamamatsu_S10943-1071_cutoff350MHz.dat (1.1), qe_hamamatsu_8500C.dat (1.1), spe_hamamatsu_H8500C.dat (1.1) (utags: prod5, prod6beta1): Adding SCT parameter files used for Hybrid-1 to CVS repository. Most files contributed by Matthew Wood. 2012-11-16 19:27 bernlohr * generic_run.sh (1.15), Cameras/modular_camera.cc (1.2), cfg/CTA/CTA-ULTRA5-large.cfg (1.4), cfg/CTA/CTA-ULTRA5-medium.cfg (1.4), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.4), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.7), cfg/CTA/CTA-ULTRA5.cfg (1.6), cfg/CTA/mirror_CTA-LST-1.51-198-0.03.dat (1.1), cfg/CTA/pulse_CTA-Fx.dat (1.1), common/mc_aux.h (1.101), common/sim_config.c (1.102), common/sim_telarray.c (1.89), hess/Makefile.hess (1.101), hess/hess_defaults.h (1.78), hess/sim_conv2hess.c (1.84), util/multipipe_corsika.c (1.13): Getting closer to prod-2. In particular, needed to take care of length of FADC and discriminator buffers, what happens to CORSIKA data with more telescopes than configured (SCTs) and configuration files, of course. 2012-11-15 16:27 bernlohr * common/sim_imaging.c (1.51): Avoid a compiler warning (not relevant). 2012-11-12 13:51 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.3), CTA-ULTRA5-medium.cfg (1.3), CTA-ULTRA5-small-dc.cfg (1.3), CTA-ULTRA5-small-sc.cfg (1.6), CTA-ULTRA5.cfg (1.5): Re-organising ULTRA5 configuration files such that comparisons should be easy now, changing a few values on the way. 2012-11-12 13:49 bernlohr * cfg/CTA/pmt_specs_R11920.cfg (1.2): Use the same best-guess pulse shape now for input to trigger and to readout. 2012-11-12 13:47 bernlohr * Cameras/: modular_camera.cc (1.1), smartpix.cc (1.5, prod-3-initial): Adding code for generating a definition file for a camera made of modules, with the different types of trigger definitions easily possible between neighbouring modules. The default values should generate a 1855 pixel camera definitio file as envisaged for CTA LSTs. 2012-11-05 12:10 bernlohr * Mirrors/draw_mirrors.c (1.4), common/sim_imaging.c (1.50): The 'automatically' calculated mirror facet focal lengths were not optimal for intermediate dish shapes. 2012-11-05 12:08 bernlohr * cfg/CTA/mirror_CTA-LST-1.51-206-0.03.dat (1.2): Coordinates rotated by 90 deg. 2012-10-29 12:41 bernlohr * generic_run.sh (1.14): More preparations for prod2. 2012-10-29 12:33 bernlohr * common/sim_signal.c (1.56): Explicitely check for discriminator input pulse shape of effective length zero because of wrong file format. 2012-10-29 12:32 bernlohr * common/sim_telarray.c (1.88): Fix recent typo. 2012-10-29 12:31 bernlohr * hess/Makefile.hess (1.100): Export additional files for CTA prod2. 2012-10-29 12:30 bernlohr * sim_hessarray.dox (1.5): Use the term 'sim_telarray' for the generated source-code documentation. 2012-10-29 12:29 bernlohr * common/sim_config.c (1.101): Fix for more possible cases of the path to the preprocessor program. 2012-10-29 12:26 bernlohr * cfg/CTA/: CTA-ULTRA5-small-sc.cfg (1.5), CTA-ULTRA5.cfg (1.4), camera_CTA-ULTRA1-small_9deg.dat (1.2), camera_CTA_LST_1855pixels.dat (1.2, prod6beta1, prod5, prod-3-initial), disc_shape_CHEC.dat (1.1, prod6beta1, prod5, prod-3-initial), glass_eff.dat (1.2, prod6beta1, prod5, prod-3-initial): Update and add various config files for CTA prod2. 2012-10-29 12:26 bernlohr * corsika/iact.c (1.77): Commit regenerated file. 2012-10-17 16:04 bernlohr * corsika/: iact.c (1.76), iact_full5.c (1.77): Fix typo: line starting comments block got lost by mistake. 2012-10-17 12:57 bernlohr * doc_src/sim_hessarray.tex (1.44): Incomplete documentation update. 2012-10-16 19:15 bernlohr * common/sim_telarray.c (1.87): If there are pseudo-photon-bunches with information about the emitting particle (wavelength 9999), ignore them even if the ALL_WL_RANDOM option is set. 2012-10-16 18:58 bernlohr * corsika/corsika.dox (1.20): Version 1.46 2012-10-16 18:51 bernlohr * corsika/: README (1.55), README.tex (1.48): Verions 1.46 2012-10-16 18:48 bernlohr * corsika/: Makefile.dist (1.53), README.tex (1.47), iact.c (1.75), iact_full5.c (1.76): Version 1.46 2012-10-11 17:16 bernlohr * multi/multi_cta-ultra5.cfg (1.1): Another file needed for prod2 2012-10-11 16:59 bernlohr * common/mc_aux.h (1.100), common/sim_config.c (1.100), hess/Makefile.hess (1.99), hess/sim_conv2hess.c (1.83): More updates towards prod2 More updates towards prod2. 2012-10-11 16:57 bernlohr * cfg/CTA/: CTA-ULTRA5-small-sc.cfg (1.4), CTA-ULTRA5.cfg (1.3), camera_CHEC.dat (1.2), camera_CTA-LST+MST-all.dat (1.2, prod6beta1, prod5, prod-3-initial), camera_CTA-MST-SC-M3ND.dat (1.2, prod6beta1, prod5, prod-3-initial), camera_CTA_LST_1855pixels.dat (1.1), glass_eff.dat (1.1): More/updated config files for prod2 2012-10-09 16:14 bernlohr * common/sim_config.c (1.99): Non-zero store_photoelectrons value implies that we want to store the photo-electrons. 2012-10-09 16:13 bernlohr * hess/hess_defaults.h (1.77): Disable old-style mirror definitions. 2012-09-13 17:53 bernlohr * cfg/CTA/angular_response_fresnel.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.98): Adding a angular pixel response due to Fresnel reflection. 2012-09-13 16:19 bernlohr * cfg/CTA/: qe_h10966a-100.dat (1.1), qe_h10966a.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding QE curves for Hamamatsu MaPMTs from data sheet. 2012-09-12 17:13 bernlohr * hess/Makefile.hess (1.97): Add atmospheric transmission table for H=2.662 km. 2012-09-12 17:11 bernlohr * cfg/common/atm_trans_2662_1_10_0_0_2662.dat (1.1): Add a first atmospheric transmission model for the Leoncito candidate site. 2012-09-12 16:52 bernlohr * cfg/CTA/CTA-ULTRA5-large.cfg (1.2), cfg/CTA/CTA-ULTRA5-medium.cfg (1.2), cfg/CTA/CTA-ULTRA5-small-dc.cfg (1.2), cfg/CTA/CTA-ULTRA5-small-sc.cfg (1.3), cfg/CTA/CTA-ULTRA5.cfg (1.2), hess/Makefile.hess (1.96): More complete prod-2 candidate configuration, but with contributed SC-SST part probably still broken and DC-SST not yet adapted. 2012-09-12 16:51 bernlohr * generic_run.sh (1.13): Allow for flexible site altitude. 2012-09-12 12:48 bernlohr * cfg/CTA/: CTA-ULTRA5-small-sc.cfg (1.2), angulardep_v17.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CHEC.dat (1.1), mirror_astri.dat (1.1, prod6beta1, prod5, prod-3-initial), mirror_v17.dat (1.1), pulse_CHEC.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_CHEC.dat (1.1, prod6beta1, prod5, prod-3-initial): Incorporate SC-SST configuration files provided by Dan Parsons. 2012-09-12 11:58 bernlohr * Cameras/smartpix.cc (1.4): More detailed comments at the beginning of the output file, also mentioning the possible camera rotation. 2012-08-21 18:17 bernlohr * common/mc_aux.h (1.99), common/sim_config.c (1.98), common/sim_imaging.c (1.49), common/sim_telarray.c (1.86), hess/hess_defaults.h (1.76), hess/sim_conv2hess.c (1.82): Add camera rotation feature. 2012-08-09 16:08 bernlohr * cfg/CTA/CTA-ULTRA5.cfg (1.1): Adding another incomplete file. 2012-08-09 16:05 bernlohr * hess/Makefile.hess (1.95): Exporting more CTA configuration files. 2012-08-09 16:04 bernlohr * cfg/CTA/: CTA-ULTRA5-large.cfg (1.1), CTA-ULTRA5-medium.cfg (1.1), CTA-ULTRA5-small-dc.cfg (1.1), CTA-ULTRA5-small-sc.cfg (1.1), plexiglass.dat (1.1, prod6beta1, prod5, prod-3-initial), pmt_specs_R11920.cfg (1.1): Adding more CTA configuration files, aiming towards prod-2 but far from complete. 2012-08-09 14:35 bernlohr * cfg/: hess/hess_bestguess.cfg (1.29), hess/hess_fadc_shape.dat (1.2, prod6beta1, prod5, prod-3-initial), hess2/hess2_dish.cfg (1.3), hess2/hess2_fadc_shape-v1.dat (1.2, prod6beta1, phase2d3, prod5, prod-3-initial): Checking parameters for HESS-2 simulations. 2012-08-08 14:56 bernlohr * common/mc_aux.h (1.98), common/sim_config.c (1.97), common/sim_histograms.c (1.22), common/sim_signal.c (1.55), hess/hess_defaults.h (1.75): Set run-time limit on ADC signal and sum. 2012-08-08 14:16 bernlohr * common/sim_absorb.c (1.13): Additional checks that QE and reflectivity are in range [0:1]. 2012-08-08 13:46 bernlohr * hess/Makefile.hess (1.94): Exporting more config files for CTA 2012-08-08 13:45 bernlohr * cfg/CTA/ref_Sanko.dat (1.2, prod6beta1, prod5, prod-3-initial): Reflectivities were in percent rather than the proper fraction. 2012-08-03 18:57 bernlohr * cfg/CTA/mirror_CTA-LST-1.51-206-0.03.dat (1.1): Adding latest LST mirror layout. 2012-08-03 18:40 bernlohr * corsika/: README (1.54), README.tex (1.46): Update file sizes. 2012-08-03 18:32 bernlohr * corsika/: corsika_build_script (1.5), gen_config (1.10): Modified build scripts to allow compilation in 64-bit mode again. 2012-08-02 20:18 bernlohr * cfg/CTA/: spe_R11920-MS_ap0.0002.dat (1.1), spe_R11920-RM_ap0.0002.dat (1.1, prod6beta1, prod5) (utags: prod-3-initial): Add two different single p.e. amplitude distributions compatible with (different) measurements. 2012-07-25 18:38 bernlohr * cfg/CTA/pshape_xa7043.dat (1.1, prod6beta1, prod5, prod-3-initial): Add the proposed pulse shape for CTA PMTs. 2012-07-24 17:44 bernlohr * Mirrors/: draw_mirrors.c (1.3), plot_mirrors.c (1.2): Starting with better support of other mirror shapes than circular and standard hex. 2012-07-24 17:41 bernlohr * common/mc_aux.h (1.97): 2048 pixels for SC-SST 2012-07-24 16:36 bernlohr * cfg/hess2/hessII-mirrors-0879-installed.dat (1.1): HESS-II mirror layout as installed. 2012-07-09 13:58 bernlohr * cfg/CTA/ref_Sanko.dat (1.1): New reflectivity curve for LST mirrors. 2012-06-27 18:15 bernlohr * common/: mc_aux.h (1.96), sim_config.c (1.96), sim_telarray.c (1.85): Start preparation of compile-time options for CTA prod-2. 2012-06-12 19:41 bernlohr * cfg/CTA/CTA-ULTRA3i.cfg (1.2, prod-3-initial): Sample mode is default for 'ultra3i' variant. 2012-06-12 19:40 bernlohr * common/sim_signal.c (1.54): Be more verbose if pulse shapes are too long for internal representation. 2012-06-11 18:21 bernlohr * cfg/common/one_big_single_mirror.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/common/single_12m_mirror.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.93): And still more ... 2012-06-11 18:17 bernlohr * cfg/CTA/: CTA-ULTRA3-LST.cfg (1.1), CTA-ULTRA3-MST.cfg (1.1) (utags: prod-3-initial, prod5, prod6beta1): And a couple more config files. 2012-06-11 18:15 bernlohr * cfg/CTA/: CTA-MST_masts_camera.dat (1.1), CTA-MST_masts_camsup.dat (1.1), CTA-MST_masts_intercon.dat (1.1), CTA-MST_masts_lid.dat (1.1), CTA-MST_masts_main.dat (1.1), CTA-MST_masts_rods.dat (1.1), CTA-trg-test-LST.cfg (1.5), CTA-trg-test-MST.cfg (1.5), CTA-trg-test-common.cfg (1.5), pulse_CTA-F.dat (1.1), pulse_CTA-M.dat (1.1), pulse_shape_maxim.dat (1.1), spe_maxim1.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding more of the available config files to CVS and to exported tar file. 2012-06-11 17:17 bernlohr * multi/multi_cta-ultra3i.cfg (1.1, prod6beta1, prod5, prod-3-initial): Add corsika_multipipe configuration for 'ultra3i' setup to CVS. 2012-06-11 17:13 bernlohr * generic_run.sh (1.12), cfg/CTA/CTA-ULTRA3i-large.cfg (1.2, prod-3-initial), cfg/CTA/CTA-ULTRA3i-medium.cfg (1.2, prod-3-initial), cfg/CTA/CTA-ULTRA3i-small.cfg (1.2, prod-3-initial), cfg/CTA/array_trigger_ultra3i.dat (1.2, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.92): Update configuration to run 4 versions of prod-1 like array I simulations in parallel. 2012-05-21 12:13 bernlohr * common/sim_histograms.c (1.21): Fixing a recently introduced bug resulting in segfaults in histogram initialisation when reducing the maximum number of telescopes below the MAX_TEL limit. 2012-04-13 19:41 bernlohr * generic_run.sh (1.11), cfg/CTA/CTA-ULTRA3i-large.cfg (1.1), cfg/CTA/CTA-ULTRA3i-medium.cfg (1.1), cfg/CTA/CTA-ULTRA3i-small.cfg (1.1), cfg/CTA/CTA-ULTRA3i.cfg (1.1), cfg/CTA/array_trigger_ultra3i.dat (1.1), cfg/CTA/camera_CTA-ULTRA1-large_4.9deg.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-ULTRA1-small_9deg.dat (1.1), hess/Makefile.hess (1.91): Prepare for prod-1 production variant including only telescopes from subset I. This includes the reduced FoV of LSTs and SSTs. The array may also trigger on two different types of telescopes since they are well-separated. 2012-04-13 18:19 bernlohr * Cameras/smartpix.cc (1.3): Adding a couple of options and more detailed --help output. 2012-04-12 18:12 bernlohr * common/mc_aux.h (1.95), common/sim_config.c (1.95), common/sim_telarray.c (1.84), hess/hess_defaults.h (1.74), hess/sim_conv2hess.c (1.81): Adding the optional storage of photo-electrons above some threshold of (Cherenkov) p.e.s in a camera, fixing a bug in the conversion on the way. 2012-04-03 15:02 bernlohr * corsika/: README (1.53), README.tex (1.45), corsika.dox (1.19), iact.c (1.74): Incrementing version number. 2012-04-03 15:01 bernlohr * common/sim_telarray.c (1.83): Optional ASCII output for pulse duration in pixels and in camera. 2012-03-30 12:48 bernlohr * testeff.c (1.19): Adding yet more efficiency numbers, also for NSB. 2012-03-30 12:47 bernlohr * cfg/common/ref_perfect.dat (1.1, prod6beta1, prod5, prod-3-initial): Add perfect reflectivity for test purposes. 2012-03-15 11:14 bernlohr * testeff.c (1.18): Adding another spectrum averaged efficiency to the output. 2012-03-07 16:30 bernlohr * common/: mc_aux.h (1.94), sim_signal.c (1.53): Prepare for more flexible compile-time decision which trigger types are supported. 2012-03-07 16:18 bernlohr * testeff.c (1.17): Adding tests on the single-p.e. response file. 2012-03-02 15:30 bernlohr * testeff.c (1.16): Show separate QE and reflectivity columns. 2012-02-10 17:19 bernlohr * testeff.c (1.15): In verbose mode also producing an auxilliary listing of the Cherenkov and NSB spectra. 2012-02-10 15:26 bernlohr * cfg/common/Benn_LaPalma_sky_converted.lis (1.1): Add the converted NSB spectrum to CVS. 2012-02-10 14:43 bernlohr * nsb_int.c (1.2, prod6beta1, prod5, prod-3-initial): Also convert each individual value of the Benn&Ellison NSB spectrum. 2012-02-08 16:47 bernlohr * corsika/Copyright (1.8, prod-3-initial): Update last year number. 2012-02-08 16:36 bernlohr * corsika/: Makefile.dist (1.52), iact.c (1.73), iact_full5.c (1.75): Increment version number. Checked for compiler warnings and fixed them. Prepare for resizing of lateral view movies. 2012-02-07 16:33 bernlohr * nsb_int.c (1.1): Add a little utility program for checking absolute scales of nightsky brightness with the Benn and Ellison spectrum. 2012-01-23 20:04 bernlohr * generic_run.sh (1.10), cfg/hess/hess_bestguess.cfg (1.28), multi/multi_phase2.cfg (1.2): Prepare for some new HESS-2 simulations 2012-01-23 19:06 bernlohr * hess/sim_conv2hess.c (1.80): Little fix in printf format. 2012-01-23 12:25 bernlohr * common/mc_aux.h (1.93), common/sim_config.c (1.94), common/sim_imaging.c (1.48), hess/hess_defaults.h (1.73): Add a hole in the secondary mirror of SC optics. 2012-01-23 12:24 bernlohr * hess/Makefile.hess (1.90): Preserve the release on which a modified version is based. 2012-01-19 18:27 bernlohr * cfg/common/ref_dielectric500.dat (1.1): Made up a reflectivity curve at 9% shorter wavelengths than ref_dielectric550.dat. 2012-01-19 18:26 bernlohr * cfg/CTA/: CTA-ULTRA4-large.cfg (1.4, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-medium.cfg (1.5, prod6beta1, prod5, prod-3-initial), CTA-trg-test-LST.cfg (1.4), CTA-trg-test-MST.cfg (1.4), CTA-trg-test-common.cfg (1.4): Updating config file to account for alternate reflectivity curves. 2012-01-19 18:22 bernlohr * testeff.c (1.14): Showing more details on command line options. Adding a '-flen' option. 2012-01-02 15:09 bernlohr * cfg/CTA/camera_CTA-LST+MST-all.dat (1.1): Add camera definition with all three trigger types activated. 2012-01-02 15:08 bernlohr * cfg/CTA/pulse_FlashCam_raw.dat (1.1): Add raw pulse shape for FlashCam. 2011-12-21 14:34 bernlohr * cfg/common/: ref_AlSiO2.dat (1.1, prod6beta1, prod5, prod-3-initial), ref_AlSiO2HfO2.dat (1.1), ref_colddielectric.dat (1.1, prod6beta1, prod5, prod-3-initial), ref_dielectric550.dat (1.1), ref_silver.dat (1.1, prod6beta1, prod5, prod-3-initial): Add various reflectivity reference curves contributed by Andreas Foerster. 2011-12-16 15:31 bernlohr * hess/sim_conv2hess.c (1.79): Writing also histogram 22 (photo-electrons in triggered telescopes) to output file. 2011-12-16 15:24 bernlohr * Mirrors/draw_mirrors.c (1.2): Keep note also of the total (non-inclination corrected) mirror surface area. 2011-12-13 13:15 bernlohr * hess/hess_defaults.h (1.72): Fix typos in configuration parameter names (with abbreviated names being OK). 2011-12-13 13:14 bernlohr * hess/Makefile.hess (1.89): Add missing scripts to exported tar file. 2011-12-13 12:50 bernlohr * corsika/corsika_build_script (1.4): Sync with exported version of CORSIKA build script. 2011-12-08 13:00 bernlohr * common/mc_aux.h (1.92), common/sim_config.c (1.93), hess/hess_defaults.h (1.71), hess/sim_conv2hess.c (1.78): Add configuration parameter for I/O buffer size of normal output file. With sample mode and many telescopes and/or many pixels the default maximum of 3 MB could be exceeded rather easily. 2011-12-08 12:58 bernlohr * hess/Makefile.hess (1.88): Allow exporting without current CVS access. 2011-12-08 12:57 bernlohr * cfg/CTA/: CTA-trg-test-LST.cfg (1.3), CTA-trg-test-MST.cfg (1.3), CTA-trg-test-common.cfg (1.3): More thresholds etc from trigger test simulations. 2011-11-15 19:31 bernlohr * cfg/CTA/CTA-trg-test-LST.cfg (1.2), cfg/CTA/CTA-trg-test-MST.cfg (1.2), cfg/CTA/CTA-trg-test-common.cfg (1.2), multi/multi_cta-trg-test-LST.cfg (1.2, prod6beta1, prod5, prod-3-initial), multi/multi_cta-trg-test-LST4.cfg (1.2, prod6beta1, prod5, prod-3-initial), multi/multi_cta-trg-test-MST.cfg (1.2, prod6beta1, prod5, prod-3-initial), multi/multi_cta-trg-test-MST4.cfg (1.2, prod6beta1, prod5, prod-3-initial): Updating various configuration files etc. for the trigger tests. 2011-11-15 19:23 bernlohr * common/mc_aux.h (1.91), common/sim_config.c (1.92), common/sim_signal.c (1.52), common/sim_telarray.c (1.82), hess/hess_defaults.h (1.70), hess/sim_conv2hess.c (1.77): A number of changes related to zero-suppression of sample-mode data, storing reference pulse shapes in the data and additional minor changes. 2011-10-27 17:58 bernlohr * cfg/hess2/: hess2_comp_shape-v1x1.5.dat (1.1), hess2_comp_shape-v1x2.0.dat (1.1) (utags: phase2d3, prod-3-initial, prod5, prod6beta1): Additional, slower pulse shapes which have an advantage in case of large transit time jitter. 2011-10-27 17:57 bernlohr * common/: sim_config.c (1.91), sim_signal.c (1.51): The dsum_pre_clipping configuration parameter was not actually used. 2011-10-19 18:02 bernlohr * cfg/CTA/CTA-trg-test-LST4.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-trg-test-MST4.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-trg-test-common.cfg (1.1), cfg/CTA/camera_CTA-LST+MST-nnb.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/spe_R9420_no_ap.dat (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_cta-trg-test-LST.cfg (1.1), multi/multi_cta-trg-test-LST4.cfg (1.1), multi/multi_cta-trg-test-MST.cfg (1.1), multi/multi_cta-trg-test-MST4.cfg (1.1): Adding trigger test config files to CVS. 2011-10-19 18:00 bernlohr * hess/Makefile.hess (1.87): Fix missing backslashes in Makefile 2011-10-19 17:57 bernlohr * generic_run.sh (1.9), hess/Makefile.hess (1.86): Export also files used in trigger test studies. 2011-10-18 19:43 bernlohr * common/: sim_config.c (1.90), sim_signal.c (1.50): Different priority order of compiled-in include paths with those from environment variables and those from -I... options. 2011-10-18 19:41 bernlohr * util/pfp.c (1.3, prod-3-initial): Drop pre-ANSI-C compatibility plus a few minor changes. 2011-10-18 19:39 bernlohr * cfg/CTA/: CTA-ULTRA4-asum_shaping1.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-asum_shaping2.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-dsum_shaping-diff.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-dsum_shaping-diff2.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-dsum_shaping-diff3.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-dsum_shaping2.dat (1.1, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-large.cfg (1.3), CTA-ULTRA4-medium.cfg (1.4), CTA-trg-test-LST.cfg (1.1), CTA-trg-test-MST.cfg (1.1), camera_CTA-LST+MST.dat (1.2, prod6beta1, prod5, prod-3-initial), pmt_specs_R9420.cfg (1.4): Updating configuration files from trigger tests. 2011-09-28 18:00 bernlohr * common/sim_signal.c (1.49): Supporting both the traditional binned file format for FADC pulse shapes (with '# T=...' lines required) or an unbinned format. 2011-09-19 19:09 bernlohr * common/mc_aux.h (1.90), common/sim_config.c (1.89), common/sim_signal.c (1.48), hess/hess_defaults.h (1.69): Adding more options for digital sum triggering. 2011-09-08 14:36 bernlohr * corsika/gen_config (1.9): Fix missing with_gf variable (if no gfortran installed). 2011-08-26 15:06 bernlohr * common/: sim_config.c (1.88), sim_signal.c (1.47): Fixing the alternative afterpulsing simulation. 2011-08-12 16:38 bernlohr * cfg/CTA/CTA-ULTRA4-asum_shaping.dat (1.3, prod6beta1, prod5, prod-3-initial): Interpolate filter shape around peak. 2011-08-11 17:17 bernlohr * cfg/CTA/pmt_specs_R9420.cfg (1.3): Avoid semicolon in configuration line comment (interpreted as a new line). 2011-08-11 16:42 bernlohr * hess/hess_defaults.h (1.68): Use correct limit for DISC_BINS. 2011-08-11 16:40 bernlohr * hess/: Makefile.hess (1.85), hess_defaults.h (1.67): The FADC_BINS and DISC_BINS upper limits adapt to the internal sizes and are now enforced more strictly (resulting in error conditions rather than setting to value to the limit). 2011-08-10 18:09 bernlohr * cfg/CTA/CTA-ULTRA4-large.cfg (1.2): Fix NSB rates and adjust estimated majority trigger thresholds. 2011-08-10 16:21 bernlohr * common/mc_aux.h (1.89), common/sim_config.c (1.87), common/sim_imaging.c (1.47), common/sim_signal.c (1.46), hess/Makefile.hess (1.84), hess/hess_defaults.h (1.66): Optional generation of additional afterpulses (separate from any prompt pulses of NSB p.e.). 2011-08-10 16:19 bernlohr * Cameras/smartpix.cc (1.2): Also produce AnalogSumTrigger and DigitalSumTrigger lines (for 19 pixel groups). 2011-08-10 16:18 bernlohr * cfg/CTA/: CTA-ULTRA4-large.cfg (1.1), CTA-ULTRA4-medium.cfg (1.3), pmt_specs_R9420.cfg (1.2), spe_R9420_ap0.0.dat (1.1, prod6beta1, prod5, prod-3-initial): Add/update CTA configuration files 2011-08-04 16:49 bernlohr * cfg/CTA/camera_CTA-LST+MST.dat (1.1): Possible common camera for LST and MST. 2011-07-28 17:01 bernlohr * cfg/CTA/angular_response_H8500C.dat (1.1, prod6beta1, prod5, prod-3-initial): Adding yet another configuration file 2011-07-28 16:51 bernlohr * cfg/CTA/: CTA-ULTRA4-asum_shaping.dat (1.2), CTA-ULTRA4-dsum_shaping.dat (1.2, prod6beta1, prod5, prod-3-initial), CTA-ULTRA4-medium.cfg (1.2), array_trigger_prod1s.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-LST_4.5deg.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-MST-SC-M3ND.dat (1.1), camera_CTA-MST_8deg.dat (1.1, prod6beta1, prod5, prod-3-initial), pmt_specs_R9420.cfg (1.1), spe_R9420_ap0.00005.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0001.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0002.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0003.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0005.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0010.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0020.dat (1.1, prod6beta1, prod5, prod-3-initial), spe_R9420_ap0.0030.dat (1.1, prod6beta1, prod5, prod-3-initial): Adding more configuration files. 2011-07-22 14:25 bernlohr * cfg/hess/: hess_mirrors.dat (1.5), hess_mirrors_ct3.dat (1.2) (utags: prod-3-initial, prod5, prod6beta1): Fixing the sky-CCD positions. 2011-07-19 15:24 bernlohr * testeff.c (1.13), common/sim_absorb.c (1.12): Correcting the calculation of a spectrum-weighted average QE by the testeff program. 2011-07-08 16:40 bernlohr * cfg/CTA/qe_hamamatsu_9420_zp0753.dat (1.1, prod6beta1, prod5, prod-3-initial): Add latest CTA candidate QE curve. 2011-07-08 16:39 bernlohr * testeff.c (1.12): Extending testeff program to include spectrum weighted QE, different handling of NSB spectrum at non-zero zenith angles. 2011-07-07 13:38 bernlohr * common/mc_aux.h (1.88), common/sim_telarray.c (1.81), hess/Makefile.hess (1.83), hess/sim_conv2hess.c (1.76): Prepare for extended photo-electron storage (may include amplitude, NSB; not filled in yet). 2011-06-30 14:59 bernlohr * common/sim_imaging.c (1.46): Fix interpretation of pre-summation instructions in camera config file. 2011-06-28 17:15 bernlohr * multi/: multi_cta-prod1s.cfg (1.2), multi_cta.cfg (1.2) (utags: prod-3-initial, prod5, prod6beta1): Fix typo for prod1s script. Revert benchmark array script to default config. 2011-06-20 17:57 bernlohr * generic_run.sh (1.8), run_sim_hessarray_generic (1.2, prod-3-initial), cfg/CTA/CTA-PROD1S-large.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-PROD1S-medium.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-PROD1S-small.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/CTA-PROD1S.cfg (1.1, prod-3-initial), cfg/CTA/pulse_CTA_prod1s.dat (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_cta-prod1s.cfg (1.1): PROD-1S compatibility 2011-05-31 17:12 bernlohr * common/mc_aux.h (1.87), common/sim_config.c (1.86), common/sim_imaging.c (1.45), common/sim_signal.c (1.45), common/sim_telarray.c (1.80), hess/sim_conv2hess.c (1.75): Fix a few problems (digital pulse shape filter should be in sample steps and not in nanosecond steps, ...) and other small changes. 2011-05-31 17:09 bernlohr * generic_run.sh (1.7): Use .simhess.gz output file name only for HESS simulations. Otherwise use .simtel.gz 2011-05-31 17:03 bernlohr * cfg/hess/hess_bestguess.cfg (1.27): Fixing muon efficiencies for next round of HESS simulations. 2011-05-13 17:24 bernlohr * common/mc_aux.h (1.86), common/sim_config.c (1.85), common/sim_imaging.c (1.44), common/sim_signal.c (1.44), hess/sim_conv2hess.c (1.74): Introduce analog sum before majority trigger. Fix compilation without low-gain channel. 2011-05-11 17:39 bernlohr * common/mc_aux.h (1.85), hess/Makefile.hess (1.82): Adding configs for secondary optics. The maximum no. of tels for CTA_SC is 61. 2011-05-11 17:10 bernlohr * cfg/CTA/: mirror_secondary_optics_dp.dat (1.1), mirror_secondary_optics_vv_os2.dat (1.1), secondary_optics_js_v13.cfg (1.1), secondary_optics_js_v17.cfg (1.1), secondary_optics_vv_os2.cfg (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding configurations for secondary mirror optics, lacking proper camera definitions. 2011-05-11 16:21 bernlohr * cfg/CTA/: mirror_CTA-0.60.dat (1.1), mirror_CTA-0.90.dat (1.1), mirror_CTA-1.20.dat (1.1), mirror_CTA-1.80.dat (1.1), mirror_CTA-100_0.50.dat (1.1), mirror_CTA-100_0.60.dat (1.1), mirror_CTA-100_0.90.dat (1.1), mirror_CTA-100_1.00.dat (1.1), mirror_CTA-100_1.20-90.dat (1.1), mirror_CTA-100_1.20.dat (1.1), mirror_CTA-100_1.50.dat (1.1), mirror_CTA-100_1.75.dat (1.1), mirror_CTA-100_2.00.dat (1.1), mirror_CTA-100_2.50.dat (1.1), mirror_CTA-400_0.60.dat (1.1), mirror_CTA-400_0.90.dat (1.1), mirror_CTA-400_1.20.dat (1.1), mirror_CTA-400_1.50-162-0.02.dat (1.1), mirror_CTA-400_1.50-162-0.02.fig (1.1), mirror_CTA-400_1.50-162-0.02.pdf (1.1), mirror_CTA-400_1.50-198-0.02.dat (1.1), mirror_CTA-400_1.50-198-0.02.fig (1.1), mirror_CTA-400_1.50-198-0.02.pdf (1.1), mirror_CTA-400_1.50.dat (1.1), mirror_CTA-400_2.00.dat (1.1), mirror_CTA-HE_0.90.dat (1.1), mirror_CTA-HE_1.20.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Include many existing candidate mirror configurations into CVS. 2011-05-06 17:51 bernlohr * common/mc_aux.h (1.84): Fix non-matching #endifs. 2011-05-06 17:46 bernlohr * common/mc_aux.h (1.83), common/sim_telarray.c (1.79), doc_src/sim_hessarray.tex (1.43), hess/sim_conv2hess.c (1.73): With -DCTA_SC or -DCTA_SC=2 we can define numbers of pixels and telescopes appropriate for data from the many pixels in an array of SC optics telescope. 2011-04-29 16:25 bernlohr * hess/Makefile.hess (1.81): Export new configuration files. 2011-04-29 14:08 bernlohr * common/: sim_absorb.c (1.11), sim_signal.c (1.43), sim_telarray.c (1.78): Minor changes. 2011-04-29 14:04 bernlohr * cfg/CTA/: CTA-ULTRA4-asum_shaping.dat (1.1), CTA-ULTRA4-dsum_shaping.dat (1.1), CTA-ULTRA4-medium.cfg (1.1), camera_CTA-ULTRA1-medium_8deg-any-trigger.dat (1.1, prod6beta1, prod5, prod-3-initial): Configuration files for testing the new capabilities. 2011-04-28 20:02 bernlohr * hess/sim_conv2hess.c (1.72): More output for seeing where the summation window gets placed. 2011-04-28 14:12 bernlohr * cfg/CTA/CTA-MST_masts.dat (1.1, prod6beta1, prod5, prod-3-initial): Add MST shadowing details to CVS. 2011-04-28 14:10 bernlohr * common/sim_signal.c (1.42): Change normalization of shaping tables. 2011-04-27 17:09 bernlohr * common/mc_aux.h (1.82), common/sim_config.c (1.84), common/sim_signal.c (1.41), hess/hess_defaults.h (1.65), hess/sim_conv2hess.c (1.71): Getting closer to goals with support for multiple trigger types. 2011-04-15 17:32 bernlohr * corsika/gen_config (1.8): Updating for CORSIKA version 6.980 and a few more minor changes. 2011-04-15 16:29 bernlohr * common/mc_aux.h (1.81), common/sim_config.c (1.83), common/sim_signal.c (1.40), common/sim_telarray.c (1.77), hess/hess_defaults.h (1.64), hess/sim_conv2hess.c (1.70), util/multipipe_corsika.c (1.12): Next set of changes for multiple trigger types. In addition a number of minor changes were made in order to please GCC 4.6. 2011-04-13 15:39 bernlohr * corsika/gen_config (1.7): Improving gfortran use and adapting to CORSIKA 6.980 2011-04-11 12:47 bernlohr * corsika/iact.c (1.72): Sync with iactfull5.c 2011-04-01 17:05 bernlohr * testeff.c (1.11): Add a spectrum-weighted average efficiency (based on the Cherenkov spectrum on ground) to the output. 2011-03-17 18:39 bernlohr * common/: mc_aux.h (1.80), sim_signal.c (1.39), sim_telarray.c (1.76): Fixing a problem with sampling rates different from 1 GHz and reducing the problem of too many photo-electrons in a telescope by omitting p.e.s in already saturated pixels. 2011-03-11 17:16 bernlohr * hess/sim_conv2hess.c (1.69): Enable writing both sum and sample mode data (still need to configure the zero-suppression of the sample mode data). 2011-03-11 17:15 bernlohr * common/sim_config.c (1.82): The use of the camera_scale_factor parameter now also scales the size of the camera body (as used in the shadowing in ray-tracing). 2011-03-01 19:00 bernlohr * testeff.c (1.10), common/mc_aux.h (1.79), common/sim_config.c (1.81), common/sim_imaging.c (1.43), common/sim_signal.c (1.38), hess/hess_defaults.h (1.63): Initial working version of analog and digital sum triggers. 2011-02-02 19:50 bernlohr * testeff.c (1.9), common/mc_aux.h (1.78), common/sim_config.c (1.80), common/sim_histograms.c (1.20), common/sim_imaging.c (1.42), common/sim_signal.c (1.37), common/sim_telarray.c (1.75), corsika/atmo.c (1.13), corsika/atmo.h (1.5, prod-3-initial), hess/hess_defaults.h (1.62), hess/sim_conv2hess.c (1.68), util/multipipe_corsika.c (1.11): Get rid of many gcc compiler warnings produced with -Wextra option. Cleanup of additional stuff. The 'online' reconstruction is now optional, saving quite some main memory in case that is a problem. 2011-01-31 13:38 bernlohr * common/mc_aux.h (1.77), common/sim_config.c (1.79), common/sim_telarray.c (1.74), hess/sim_conv2hess.c (1.67): Before implementation of multiple trigger schemes. 2011-01-18 17:04 bernlohr * corsika/: README (1.52), README.tex (1.44), iact.c (1.71), iact_full5.c (1.74): Minor updates in comments. 2010-12-13 16:12 bernlohr * corsika/: iact.c (1.70), iact_full5.c (1.73): Syncing version number reported at program startup. 2010-12-13 11:59 bernlohr * corsika/: README (1.51), README.tex (1.43): Updating file sizes. 2010-12-13 11:46 bernlohr * corsika/corsika.dox (1.18): Updating doxygen config file to current doxygen version. 2010-11-26 13:08 bernlohr * cfg/hess/hess_bestguess.cfg (1.26): Phase1c2 configuration: Refurbished CT2 seems to be back to only 72% of nominal optical efficiency while CT3 has degraded again from 85% to 78%. 2010-11-17 14:13 bernlohr * common/sim_telarray.c (1.73), hess/rec_tools.c (1.6, prod-3-initial), hess/rec_tools.h (1.2, prod-3-initial), hess/sim_conv2hess.c (1.66): Use the same rec_tools as read_hess. 2010-11-06 16:46 bernlohr * common/sim_config.c (1.78): Get rid of compiler warning. 2010-11-05 17:12 bernlohr * cfg/hess/hess_masts.dat (1.3, prod6beta1, prod5, prod-3-initial), common/sim_config.c (1.77), common/sim_imaging.c (1.41), common/sim_telarray.c (1.72): Improvements in the optional shadowing by masts and rods. Results in different definition of z-coordinates (now z=f for camera lid). Extra 'Camera' keyword in the data file, since the camera has special behaviour for photons in return path (with lid open). 2010-11-05 17:02 bernlohr * hess/Makefile.hess (1.80): Additional CTA configuration files get exported. 2010-11-05 17:01 bernlohr * hess/hess_defaults.h (1.61): Don't save and re-use random state by default any more. Users may not be expecting this behaviour. 2010-10-21 17:57 bernlohr * cfg/CTA/: mirror_CTA-400_1.20-252-0.02.dat (1.1), mirror_CTA-400_1.20-264-0.02.dat (1.1), mirror_CTA-400_1.20-270-0.02.dat (1.1), mirror_CTA-400_1.20-312-0.02.dat (1.1), mirror_CTA-400_1.20-336-0.02.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Several different dish sizes for CTA-LST. 2010-10-21 17:28 bernlohr * cfg/CTA/: mirror_CTA-100_1.20-84-0.02.dat (1.1), mirror_CTA-100_1.20-88-0.02.dat (1.1) (utags: prod-3-initial): Add two candidate mirror configurations for CTA-MST. 2010-10-21 17:26 bernlohr * util/: getword.c (1.2, prod-3-initial), pfp.c (1.2), tree.c (1.2, prod-3-initial), tree.h (1.2): Add standard GPL3 copyright header. 2010-10-19 17:29 bernlohr * cfg/hess/hess_bestguess.cfg (1.25): Next telescope with refurbished mirrors is CT2. 2010-10-05 18:16 bernlohr * Mirrors/: draw_mirrors.c (1.1), plot_hess_mirrors.c (1.1, prod6beta1, prod5, prod-3-initial), plot_mirrors.c (1.1): Add a few (mainly older) utility programs for defining mirror setups for sim_telarray. 2010-09-30 18:27 bernlohr * hess/sim_conv2hess.c (1.65): Write also 'movie' Postscript output for calibration events. 2010-09-30 16:36 bernlohr * rx.cc (1.2): Allow evaluation of PSF at arbitrary depth. 2010-09-17 14:32 bernlohr * cfg/hess2/hess2_masts.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial): Adding the definition of the camera support for the evaluation of shadowing in the HESS-2 telescope. 2010-09-17 14:12 bernlohr * common/: mc_aux.h (1.76), sim_config.c (1.76), sim_imaging.c (1.40), sim_telarray.c (1.71): Fixes and enhancements to secondary mirror optics ray-tracing, in particular its setup. 2010-09-17 14:10 bernlohr * Cameras/drawdrawers.cc (1.1, prod-3-initial), Cameras/hess2pix.cc (1.1, prod-3-initial), Cameras/hesspix.c (1.1, prod-3-initial), Cameras/hesspix2.c (1.1, prod-3-initial), Cameras/hesspix3.c (1.1, prod-3-initial), Cameras/mapmtpix.cc (1.1), Cameras/smartpix.cc (1.1), Cameras/testpix.c (1.1, prod-3-initial), hess/Makefile.hess (1.79), hess/drawdrawers.cc (1.2), hess/hess2pix.cc (1.2), hess/hesspix.c (1.3), hess/hesspix2.c (1.8), hess/hesspix3.c (1.5), hess/smartpix.cc (1.8): Moving camera definition utility programs into a directory of its own. Adding a utility for multi-anode PMT cameras. 2010-08-23 15:02 bernlohr * hess/sim_conv2hess.c (1.64): Converting sector trigger times. 2010-08-20 18:39 bernlohr * rx.cc (1.1): Utility program for calculating PSF x% containment radii etc. 2010-08-11 16:16 bernlohr * common/mc_aux.h (1.75): Prepare for cameras with much more than 4095 pixels. 2010-08-11 16:15 bernlohr * common/sim_telarray.c (1.70): Report some of the common limits and definitions used for compilation. 2010-08-11 14:36 bernlohr * corsika/sampling.h (1.1): Add file missing from CVS. 2010-08-11 14:21 bernlohr * corsika/: gpl.txt (1.1), lgpl-2.1.txt (1.1), lgpl-3.txt (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding license texts to CVS. 2010-07-20 19:15 bernlohr * corsika/: corsika-6720.patch (1.1), corsika-6735.patch (1.1) (utags: prod-3-initial, prod5, prod6beta1): Old patches were not included in CVS. 2010-07-20 19:13 bernlohr * testeff.c (1.8), common/absorb.h (1.4), common/mc_aux.h (1.74), common/rndm_table.c (1.5), common/sim_absorb.c (1.10), common/sim_config.c (1.75), common/sim_histograms.c (1.19), common/sim_imaging.c (1.39), common/sim_signal.c (1.36), common/sim_telarray.c (1.69), corsika/Copyright (1.7), corsika/Makefile.dist (1.51), corsika/README (1.50), corsika/README.tex (1.42), corsika/atmo.c (1.12), corsika/atmo.h (1.4), corsika/corsika.dox (1.17), corsika/iact.c (1.69), corsika/iact_full5.c (1.72), corsika/sampling.c (1.3, prod-3-initial), corsika/sim_skeleton.c (1.7, prod-3-initial), hess/hess_defaults.h (1.60), hess/sim_conv2hess.c (1.63), util/corsika_autoinputs.cc (1.10), util/multipipe_corsika.c (1.10): (L)GPLification 2010-07-13 17:09 bernlohr * common/sim_imaging.c (1.38): Fix shadowing problem in secondary mirror optics as discovered by Dan. 2010-07-06 16:22 bernlohr * corsika/: README (1.49), README.tex (1.41), corsika.dox (1.16): Documentation updates to version 1.43. 2010-07-06 16:17 bernlohr * generic_run.sh (1.6), cfg/hess/hess_bestguess.cfg (1.24): Update for another round of HESS phase 1 simulations. 2010-06-21 15:53 bernlohr * corsika/sim_skeleton.c (1.6): Update skeleton program to reflect changes in iact.c and sim_telarray. 2010-06-11 16:54 bernlohr * corsika/Copyright (1.6): Add recent years to Copyright file. 2010-06-11 16:34 bernlohr * corsika/: README (1.48), README.tex (1.40): Add build instructions for CORSIKA versions 6.9xx 2010-06-11 16:33 bernlohr * corsika/gen_config (1.6): Add experimental support for CORSIKA versions 6.9xx 2010-06-11 14:35 bernlohr * corsika/: iact.c (1.68), iact_full5.c (1.71): Add auto-detection of THIN option used in CORSIKA to disable compact format. 2010-06-11 14:34 bernlohr * corsika/gen_config (1.5): Make QGSJET II and urqmd now the default interaction models. 2010-06-11 12:57 bernlohr * corsika/: Makefile.dist (1.50), README (1.47), README.tex (1.39), iact.c (1.67), iact_full5.c (1.70): Fixing a problem with weights when CORSIKA is run with the THIN option. 2010-05-03 12:50 bernlohr * common/: sim_config.c (1.74), sim_imaging.c (1.37): More debugging printout. 2010-02-18 15:09 bernlohr * corsika/corsika.dox (1.15): Update version number. 2010-02-18 13:44 bernlohr * common/: mc_aux.h (1.73), sim_config.c (1.73), sim_telarray.c (1.68): Improving the code compiled only when SHOW_PE_LIST is defined. 2010-02-15 18:29 bernlohr * cfg/hess2/hess2_shadow.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial): Adding definitions for HESS-2 camera support ('quadrupods') and mount. 2010-02-15 16:07 bernlohr * common/: sim_config.c (1.72), sim_imaging.c (1.36): Fixing two bugs in the RAYTRACING_INTERSECT_RODS dependent code (which is not used in normal production): one to make the camera support elements take part in the shift of all optical elements wrt the crossing point of the drive axes and one which would incorrectly mark some rays as shadowed when they hit a focal-plane-crossing element behind the focal plane. 2010-01-25 17:52 bernlohr * common/sim_config.c (1.71): Make sure that IMAGING_LIST=none means no file get written (rather than writing to a file named 'none'). 2009-12-16 14:39 bernlohr * common/sim_config.c (1.70), common/sim_telarray.c (1.67), corsika/iact.c (1.66), corsika/iact_full5.c (1.69), hess/sim_conv2hess.c (1.62): Extra shower parameters can be filled in during processing of a shower in CORSIKA (that is between televt_() and telend_()) and will be automatically written to the output stream, recognized by sim_telarray, and included in the MCShower block of the sim_telarray output. By default and with unmodified iact.c code, no such parameters are stored, and the sim_telarray output format is left unchanged. 2009-12-07 20:21 bernlohr * corsika/: README (1.46), README.tex (1.38): Update reported file sizes. 2009-12-07 19:27 bernlohr * common/ap_snprintf.c (1.2, prod6beta1, prod5, prod-3-initial), common/mc_aux.h (1.72), common/rndm2.c (1.4, prod-3-initial), common/rndm2.h (1.5, prod-3-initial), common/rndm_table.c (1.4), common/sim_absorb.c (1.9), common/sim_config.c (1.69), common/sim_histograms.c (1.18), common/sim_imaging.c (1.35), common/sim_signal.c (1.35), common/sim_telarray.c (1.66), common/testio.c (1.3, prod5, prod-3-initial), common/wrgif.c (1.3, prod-3-initial), corsika/atmo.c (1.11), corsika/atmo.h (1.3), corsika/iact.c (1.65), corsika/iact_full5.c (1.68), hess/hess_defaults.h (1.59): Documentation: doxygen handling of CVS tags is better in verbatim environment. 2009-12-04 14:22 bernlohr * common/: rndm2.c (1.3), rndm2.h (1.4): Get rid of possible, though irrelavant, compiler warning. 2009-12-02 15:44 bernlohr * common/mc_aux.h (1.71), common/sim_config.c (1.68), common/sim_imaging.c (1.34), common/sim_telarray.c (1.65), doc_src/sim_hessarray.tex (1.42), hess/hess_defaults.h (1.58): Additional fine-tuning in imaging with secondary mirror optics. 2009-11-30 17:49 bernlohr * common/sim_imaging.c (1.33): Added correction for non-planar focal surface in imaging with secondary mirror optics. No corrections are made for pixel alignment, i.e. as if pixels were shifted along the telescope axis to match the intended focal surface. 2009-11-25 12:11 bernlohr * testeff.c (1.7), common/absorb.h (1.3), common/mc_aux.h (1.70), common/sim_absorb.c (1.8), common/sim_config.c (1.67), common/sim_imaging.c (1.32), hess/hess_defaults.h (1.57): Imaging with secondary mirror optics should be (mostly) working now, except for focal surface curvature, but has not seen much testing yet. The two mirror surfaces are assumed to have the same (angle-independent) reflectivity. 2009-11-13 15:20 bernlohr * common/sim_config.c (1.66), common/sim_imaging.c (1.31), common/sim_signal.c (1.34), hess/hess_defaults.h (1.56): Getting closer to completeness of the raytracing with secondary mirror optics, although still not functional. At the same time also swapping the codes for mirror shape types 2 and 3 (square and hex-flat-y) to match the corresponding definitions for pixel shape types. At the same time also erasing more of the (HEGRA-ages) legacy code for fixed camera layout (was deprecated already and inactive). 2009-11-13 15:16 bernlohr * cfg/hess2/hessII-mirrors-0850-r.dat (1.3, prod6beta1, phase2d3, prod5, prod-3-initial): Change shape types to match the change in the sim_imaging.c code. 2009-10-28 16:26 bernlohr * cfg/CTA/: CTA-HE.cfg (1.5), CTA-ULTRA1-10mWF.cfg (1.5), CTA-ULTRA1-large.cfg (1.6), CTA-ULTRA1-medium-WF.cfg (1.4), CTA-ULTRA1-medium-WF_0.18deg.cfg (1.2), CTA-ULTRA1-medium.cfg (1.6), CTA.cfg (1.2) (utags: prod-3-initial, prod5, prod6beta1): Allow ideal mirror quality by a simple definition (-DPERFECT_DISH) at run-time. 2009-10-16 19:57 bernlohr * common/sim_config.c (1.65), hess/hess_defaults.h (1.55): Fix removal of configuration items not really belonging to OLD_CAMERA_STYLE. 2009-10-15 17:09 bernlohr * hess/Makefile.hess (1.78): Export additional CTA data files. 2009-10-15 17:04 bernlohr * cfg/CTA/: mirror_CTA-100.fig (1.1), qe_MPPC.dat (1.1), qe_hamamatsu_9420-100.dat (1.1), qe_hamamatsu_9420.dat (1.1), qe_hamamatsu_R8619_ASSY.dat (1.1), qe_hamamatsu_R9420-100-10.dat (1.1), spe_hamamatsu_9420-100_g2e5.dat (1.1), spe_hamamatsu_9420-100_g5e4.dat (1.1), spe_hamamatsu_9420_g5e4.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding more quantum efficiency curves and single-p.e. responses for PMTs under discussion for CTA. 2009-10-15 14:46 bernlohr * hess/Makefile.hess (1.77): Export also new transmission tables. 2009-10-15 14:46 bernlohr * cfg/hess/: atm_trans_1800_1_10_0_0_0.dat (1.2), atm_trans_1800_1_10_0_0_1800.dat (1.2), atm_trans_1800_1_1_0_0_0.dat (1.2), atm_trans_1800_1_1_0_0_1800.dat (1.2), atm_trans_1800_1_3_0_0_0.dat (1.2), atm_trans_1800_1_3_0_0_1800.dat (1.2), atm_trans_1800_1_4_0_0_0.dat (1.2), atm_trans_1800_1_4_0_0_1800.dat (1.2): Re-generate transmission tables for HESS site with a slightly more uniform sampling of altitudes. 2009-10-15 14:45 bernlohr * cfg/common/: atm_trans_0_1_10_0_0_0.dat (1.1), atm_trans_1000_1_10_0_0_1000.dat (1.1), atm_trans_1500_1_10_0_0_1500.dat (1.1), atm_trans_1800_1_10_0_0_1800.dat (1.1), atm_trans_2000_1_10_0_0_2000.dat (1.1), atm_trans_2200_1_10_0_0_2200.dat (1.1), atm_trans_2500_1_10_0_0_2500.dat (1.1), atm_trans_3000_1_10_0_0_3000.dat (1.1), atm_trans_3500_1_10_0_0_3500.dat (1.1), atm_trans_3700_1_10_0_0_3700.dat (1.1), atm_trans_4000_1_10_0_0_4000.dat (1.1), atm_trans_4500_1_10_0_0_4500.dat (1.1), atm_trans_5000_1_10_0_0_5000.dat (1.1), atm_trans_500_1_10_0_0_500.dat (1.1), atm_trans_5500_1_10_0_0_5500.dat (1.1): Add transmission tables covering a wide range of altitudes. 2009-10-15 14:44 bernlohr * testeff.c (1.6): Fix text typo. 2009-10-14 18:02 bernlohr * hess/hess_defaults.h (1.54): Documentation-related changes and adding focal surface parameters. 2009-10-14 18:02 bernlohr * doc_src/sim_hessarray.tex (1.41): Documentation changes. 2009-10-14 18:01 bernlohr * corsika/README (1.45): Documentation changes (produced file). 2009-10-14 18:01 bernlohr * common/sim_config.c (1.64): Adding parameters for shape of focal surface (for secondary mirror optics variant only). 2009-09-22 13:38 bernlohr * corsika/: Makefile.dist (1.49), README (1.44), README.tex (1.37): Increment version number and update the file sizes. Not really a change in features this time. 2009-09-21 17:06 bernlohr * corsika/.cvsignore (1.3, prod-3-initial): Mark file symlinked to hessio modules as to be ignored. 2009-09-21 16:59 konrad * hess/hess_defaults.h (1.53): Add more configuration keywords for support of alternate optics types. 2009-09-21 16:59 konrad * corsika/.cvsignore (1.2): [no log message] 2009-09-21 16:58 konrad * common/: mc_aux.h (1.69), sim_config.c (1.63), sim_imaging.c (1.30), sim_telarray.c (1.64): Extend imaging to include a single paraboloid mirror. Also add infrastructure to implement a secondary mirror optics (primary and secondary in one piece each). 2009-07-08 19:16 bernlohr * common/mc_aux.h (1.68), common/sim_telarray.c (1.63), hess/sim_conv2hess.c (1.61): Keep more details about CORSIKA interaction details. 2009-06-22 14:57 bernlohr * common/sim_telarray.c (1.62): Show also height of first interaction for every shower. 2009-05-04 16:21 bernlohr * corsika/gen_config (1.4): Update version number+date. 2009-05-04 16:18 bernlohr * corsika/gen_config (1.3): Fix bug in selection of Sibyll interaction model. 2009-02-13 15:51 bernlohr * cfg/CTA/: CTA-ULTRA3.cfg (1.1), array_trigger_ultra3.dat (1.1, prod6beta1, prod5) (utags: prod-3-initial): Add missing files to CVS. 2008-11-24 17:53 bernlohr * corsika/: iact.c (1.64), iact_full5.c (1.67): Update version string. 2008-11-24 17:48 bernlohr * corsika/: iact.c (1.63), iact_full5.c (1.66): The bunches stored in temporary files were not included when deciding whether to atu-split the photon bunch data. 2008-11-20 16:27 bernlohr * hess/Makefile.hess (1.76): Use sim_telarray as an alias to sim_hessarray, both for the executable and the tar file. I don't want to go into extremes here though ... 2008-11-20 16:05 bernlohr * common/: mc_aux.h (1.67), sim_config.c (1.62), sim_signal.c (1.33): The time delay for light propagation in the telescope is now corrected when comparing times at the central trigger. Effects of different electronics in different telescopes cannot be corrected at this point. While different telescope types will now trigger within a few nanoseconds, a detailed comparison of central trigger times will need some calibration of the remaining delays, e.g. as functions of core distance and amplitude, for each telescope type. 2008-11-12 14:30 bernlohr * generic_run.sh (1.5), hess/Makefile.hess (1.75), multi/multi_cta-ultra3.cfg (1.1, prod6beta1, prod5, prod-3-initial): Completing CTA Ultra 3 configuration. 2008-11-12 13:49 bernlohr * util/multipipe_corsika.c (1.9): Bug fixes for sequential mode with split data. 2008-11-12 13:48 bernlohr * cfg/CTA/CTA-ULTRA1-medium-WF.cfg (1.3), cfg/CTA/CTA-ULTRA1-medium-WF_0.18deg.cfg (1.1), cfg/CTA/CTA-ULTRA1-medium.cfg (1.5), cfg/CTA/CTA-ULTRA1-small.cfg (1.5, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-ULTRA1-medium_10deg_0.25deg.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.74): The 12 m wide-field (Bruno) telescopes get a longer focal length and larger pixels. Pixel threshold so far only a guess. 2008-10-29 20:01 bernlohr * corsika/: iact.c (1.62), iact_full5.c (1.65): Warning about printf format fixed. 2008-10-29 19:51 bernlohr * corsika/: iact.c (1.61), iact_full5.c (1.64): Fix the decoding of 'k' and 'M' suffixes in auto-split parameter. 2008-10-29 14:24 bernlohr * hess/sim_conv2hess.c (1.60): Image timing analysis. 2008-10-28 15:27 bernlohr * generic_run.sh (1.4), multi/multi_cta-ultra1.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_cta-ultra2.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_hess_41tel.cfg (1.2, prod6beta1, prod5, prod-3-initial): Tweaking CTA production scripts. 2008-10-28 13:43 bernlohr * cfg/CTA/: CTA-ULTRA1-10mWF.cfg (1.4), CTA-ULTRA1-large.cfg (1.5), CTA-ULTRA1-medium-WF.cfg (1.2), CTA-ULTRA1-medium.cfg (1.4), CTA-ULTRA1-small.cfg (1.4), CTA-ULTRA1.cfg (1.4, prod-3-initial), CTA-ULTRA2.cfg (1.4, prod-3-initial): Enable pulse shape analysis for all CTA Ultra telescope types and fine-tune the minimum number of p.e. for trigger. 2008-10-28 13:08 bernlohr * hess/sim_conv2hess.c (1.59): Add the ADC time interval to the conversion. 2008-10-20 17:29 bernlohr * common/mc_aux.h (1.66): Tweak a bit more space for CTA-Ultra simulations. 2008-10-20 17:27 bernlohr * cfg/CTA/CTA-ULTRA1-medium-WF.cfg (1.1): Config file added to CVS. 2008-10-17 21:05 bernlohr * common/mc_aux.h (1.65), common/sim_config.c (1.61), hess/Makefile.hess (1.73), hess/sim_conv2hess.c (1.58): Make the tail-cut values scalable individually for each telescope. 2008-10-17 21:05 bernlohr * cfg/CTA/: CTA-ULTRA1-10mWF.cfg (1.3), CTA-ULTRA1-large.cfg (1.4), CTA-ULTRA1-medium.cfg (1.3), CTA-ULTRA1-small.cfg (1.3): More fixes for CTA-Ultra 1/2 simulations. 2008-10-17 17:43 bernlohr * generic_run.sh (1.3), cfg/CTA/CTA-ULTRA2.cfg (1.3): More fixes for CTA-Ultra2 simulation. 2008-10-17 17:03 bernlohr * cfg/CTA/CTA-ULTRA2.cfg (1.2): Wrong array trigger file. 2008-10-17 17:01 bernlohr * hess/smartpix.cc (1.7): Fix compiler warning. 2008-10-17 17:01 bernlohr * common/: mc_aux.h (1.64), sim_config.c (1.60), sim_signal.c (1.32): The gate width of the array trigger can be specified separately for each group now. 2008-10-17 17:00 bernlohr * cfg/CTA/: CTA-ULTRA1.cfg (1.3), CTA-ULTRA2.cfg (1.1), array_trigger_ultra1.dat (1.1, prod6beta1, prod5, prod-3-initial), array_trigger_ultra2.dat (1.1, prod6beta1, prod5, prod-3-initial), camera_CTA-ULTRA1-medium_10deg.dat (1.1, prod6beta1, prod5, prod-3-initial): More details and a second variant for CTA-Ultra simulations. 2008-10-14 18:58 bernlohr * corsika/: iact.c (1.60), iact_full5.c (1.63): Be more generous with -/_ in IACT configuration options. 2008-10-14 18:56 bernlohr * common/sim_telarray.c (1.61): Some fixes, mainly added warnings, for IACT split data mode. 2008-10-06 14:59 bernlohr * corsika/: Makefile.dist (1.48), README (1.43), README.tex (1.36), iact.c (1.59), iact_full5.c (1.62): Allow splitting of photon bunch data on a case-by-case basis as another option, increment version number to 1.41 and update documentation. 2008-10-06 13:53 bernlohr * common/sim_telarray.c (1.60), corsika/iact.c (1.58), corsika/iact_full5.c (1.61), util/multipipe_corsika.c (1.8): Handle data where data blocks with photon bunches are not for a whole array but for individual telescopes, between a header and trailer per array. 2008-10-06 13:52 bernlohr * cfg/CTA/: CTA-ULTRA1-10mWF.cfg (1.2), CTA-ULTRA1-large.cfg (1.3), CTA-ULTRA1-medium.cfg (1.2), CTA-ULTRA1-small.cfg (1.2): Update pixel threshold etc. for the CTA-Ultra1 configuration. 2008-09-12 21:24 bernlohr * hess/Makefile.hess (1.72): Exporting more CTA configuration files. 2008-09-12 21:23 bernlohr * corsika/README (1.42): Generated documentation update. 2008-09-12 21:22 bernlohr * generic_run.sh (1.2), cfg/CTA/CTA-ULTRA1-large.cfg (1.2), cfg/CTA/CTA-ULTRA1.cfg (1.2): Update for CTA-ULTRA1. 2008-09-12 17:20 bernlohr * cfg/CTA/camera_CTA-10mWF.dat (1.1, prod6beta1, prod5, prod-3-initial): Adding one more configuration data file. 2008-09-12 17:20 bernlohr * cfg/CTA/: camera_CTA-ULTRA1-large_5deg.dat (1.1), camera_CTA-ULTRA1-medium_8deg.dat (1.1), camera_CTA-ULTRA1-small_10deg.dat (1.1), cta_funnels_f1.0_r80.dat (1.1), mirror_CTA-100.dat (1.1), mirror_CTA-10mWF.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding more configuration data files for CTA-ULTRA1. 2008-09-12 17:19 bernlohr * cfg/CTA/: CTA-ULTRA1-10mWF.cfg (1.1), CTA-ULTRA1-large.cfg (1.1), CTA-ULTRA1-medium.cfg (1.1), CTA-ULTRA1-small.cfg (1.1), CTA-ULTRA1.cfg (1.1): Also adding the basic configuration files for CTA-ULTRA1, even though not all parameters have been fully determined yet. 2008-09-12 17:16 bernlohr * cfg/CTA/: CTA-ULTRA1-large-hQE.cfg (1.1), CTA-ULTRA1-large-uQE.cfg (1.1), CTA-ULTRA1-medium-hQE.cfg (1.1), qe_hamamatsu_bialkali.dat (1.1, prod6beta1, prod5), qe_hamamatsu_super-bialkali.dat (1.1, prod6beta1, prod5), qe_hamamatsu_ultra-bialkali.dat (1.1, prod6beta1, prod5), qe_magic_no_layer.dat (1.1, prod6beta1, prod5), qe_magic_with_layer.dat (1.1, prod6beta1, prod5) (utags: prod-3-initial): Updating and adding more configuration files for CTA. 2008-08-27 17:24 tag Release_1_40 2008-08-27 17:24 bernlohr * corsika/: README (1.41), README.tex (1.35) (utags: Release_1_40): Documentation update. 2008-08-22 14:58 bernlohr * util/corsika_autoinputs.cc (1.9): Get command line syntax in doxygen comments into sync with --help option. 2008-08-22 14:33 bernlohr * util/corsika_autoinputs.cc (1.8): Allow to specify a run number at the time of job submission. 2008-08-19 15:28 bernlohr * util/corsika_autoinputs.cc (1.7): Force host names in CORSIKA input file to have a maximum of 20 characters. 2008-08-13 18:00 bernlohr * common/: mc_aux.h (1.63), sim_config.c (1.59), sim_telarray.c (1.59): Allow for more telescopes in a configuration termed CTA_ULTRA. The maximum number of bunches per telescope which can now be controlled at run-time in CORSIKA is passed in an environment variable. 2008-08-13 17:48 bernlohr * corsika/: iact.c (1.57), iact_full5.c (1.60) (utags: Release_1_40): Fix compiler warning. 2008-08-13 17:08 bernlohr * corsika/: Makefile.dist (1.47, Release_1_40), README (1.40), README.tex (1.34), iact.c (1.56), iact_full5.c (1.59): The maximum number of bunches per telescope can now be controlled at run-time and is passed along if the telescope simulation is run in a pipe. 2008-08-05 17:01 bernlohr * generic_run.sh (1.1), run_sim_hessarray_generic (1.1), multi/multi_cta-he.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_cta.cfg (1.1), multi/multi_cta5.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_hess_41tel.cfg (1.1), multi/multi_phase1.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_phase1b.cfg (1.1, prod6beta1, prod5, prod-3-initial), multi/multi_phase2.cfg (1.1), multi/multi_phase3.cfg (1.1, prod6beta1, prod5, prod-3-initial): Adding production scripts. 2008-08-05 10:21 bernlohr * hess/sim_conv2hess.c (1.57): Merge optional code to print text lists of photo-electron times. 2008-08-05 10:21 bernlohr * common/sim_telarray.c (1.58): Merge optional code to print text lists of photo-electron times. In the course of that it was discovered that one of the p.e. counters was not reset after events with too few p.e.s. While the impact of that is thought to be minimal, there might have been occasionally bad p.e.s in a pixel within the camera readout interval. 2008-07-31 18:42 bernlohr * corsika/corsika_build_script (1.3, Release_1_40): More compiler version adjustments. 2008-07-15 18:06 bernlohr * corsika/: iact.c (1.55), iact_full5.c (1.58): Fix missing argument to setenv. 2008-07-07 19:30 bernlohr * corsika/: iact.c (1.54), iact_full5.c (1.57): Update modification date 2008-07-07 19:25 bernlohr * corsika/iact.c (1.53): Commit als generated file. 2008-07-07 19:23 bernlohr * corsika/iact_full5.c (1.56): Set CORSIKA_PID environment variable before opening output pipe. 2008-07-07 19:07 bernlohr * .cvsignore (1.1), common/.cvsignore (1.1, prod6beta1, prod5, prod-3-initial), corsika/.cvsignore (1.1, Release_1_40), doc_src/.cvsignore (1.1, prod6beta1, prod5, prod-3-initial), hess/.cvsignore (1.1, prod6beta1, prod5, prod-3-initial), util/.cvsignore (1.1, prod6beta1, prod5, prod-3-initial): Reduce CVS noise. 2008-07-07 18:54 bernlohr * util/multipipe_corsika.c (1.7): Split up one sleep into several sleeps for sequential mode, in case a signal just comes when we are about to go to sleep. 2008-07-07 18:53 bernlohr * common/sim_telarray.c (1.57): Add debugging output for support of sequential mode in multipipe_corsika. 2008-06-08 21:58 bernlohr * common/sim_signal.c (1.31): Fix a bug in the new code in array_trigger with time window. 2008-06-06 22:26 bernlohr * common/sim_telarray.c (1.56), util/multipipe_corsika.c (1.6): Enable sequential processing of multiple telescope simulations in multipipe_corsika. 2008-06-06 22:25 bernlohr * util/corsika_autoinputs.cc (1.6): Fix compilation problem with GCC 4.3.1. 2008-06-06 22:25 bernlohr * common/sim_imaging.c (1.29): Fix writing beyond end of buffer found by the compiler. 2008-05-08 15:06 bernlohr * corsika/corsika_build_script (1.2): Take care of gfortran<4.2 2008-05-08 13:26 bernlohr * corsika/corsika_build_script (1.1): Adding the script used to build CORSIKA binaries in one command. 2008-05-08 12:44 bernlohr * cfg/CTA/CTA-HE.cfg (1.4): Reduce the offset from star light focus to shower focus (pixel entrance) a bit. 2008-05-07 17:37 bernlohr * cfg/CTA/CTA-HE.cfg (1.3): Small parameters adjustment. 2008-05-07 13:23 bernlohr * cfg/CTA/CTA-HE.cfg (1.2): File name for array trigger config has changed. 2008-05-07 12:49 bernlohr * cfg/CTA/array_trigger1_CTA-HE.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/array_trigger2_CTA-HE.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.71): Adding array trigger configuration for CTA high-energy array. 2008-05-07 12:42 bernlohr * cta-he.cfg (1.2), cfg/CTA/CTA-HE.cfg (1.1): Move the CTA-HE config file into the cfg/CTA directory. 2008-05-07 12:38 bernlohr * cta-he.cfg (1.1), cfg/CTA/camera_CTA-HE_7025.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-HE_8025.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA-HE_8030.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/mirror_CTA-HE.dat (1.1, prod6beta1, prod5, prod-3-initial): Adding configuration files for a CTA high-energy sub-array. 2008-05-06 19:00 bernlohr * common/sim_config.c (1.58), common/sim_signal.c (1.30), hess/sim_conv2hess.c (1.56): A fix for the processing of array trigger config files and a couple of tweaks for rare cases in Hillas parameter reconstruction. 2008-05-05 19:21 bernlohr * util/corsika_autoinputs.cc (1.5): Adding '--keep-seeds' flag in order to run the same thing, except for run number and manually changed parameters, again. 2008-04-28 18:24 bernlohr * common/sim_config.c (1.57): More convenient configuration of large array trigger groups as 'n1 to n2'. 2008-04-18 16:15 bernlohr * cfg/hess2/hess-phase2.cfg (1.3), cfg/hess2/hess2_array_trigger.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess/Makefile.hess (1.70): Changing default HESS-2 trigger condition to 2 of CT1-CT5 or just CT5. 2008-04-16 17:51 bernlohr * cfg/hess/hess_bestguess.cfg (1.23): Add more variants of the optical efficiency of HESS-1 telescopes in both phase 1 and phase 2 configurations. 2008-04-16 17:50 bernlohr * cfg/hess2/: hess2sector.cfg (1.6), hess2smartpixel.cfg (1.5, prod-3-initial): Activate pulse shape analysis without summation by default for the large telescope. 2008-04-16 17:49 bernlohr * common/mc_aux.h (1.62): Avoid warnings when compiles with -DCTA or -DPHASE3. 2008-04-16 17:48 bernlohr * hess/Makefile.hess (1.69): Need to export also the proper mirror config for HESS-2. 2008-04-13 14:34 bernlohr * common/mc_aux.h (1.61), common/sim_signal.c (1.29), common/sim_telarray.c (1.55), hess/Makefile.hess (1.68), hess/hess_defaults.h (1.52), hess/sim_conv2hess.c (1.55): More changes for pulse shape analysis. 2008-04-05 14:05 bernlohr * common/mc_aux.h (1.60), common/sim_signal.c (1.28), common/sim_telarray.c (1.54), hess/hess_defaults.h (1.51), hess/sim_conv2hess.c (1.54): Fixing and extending the pulse shape analysis and the conversion of the timing data. 2008-04-04 19:35 bernlohr * common/mc_aux.h (1.59), common/sim_signal.c (1.27), common/sim_telarray.c (1.53), hess/hess_defaults.h (1.50), hess/sim_conv2hess.c (1.53): Converting now also the pulse shape analysis data. 2008-04-03 19:40 bernlohr * common/mc_aux.h (1.58), common/sim_config.c (1.56), common/sim_signal.c (1.26), hess/hess_defaults.h (1.49): Second set of additions for timing information adds pixel pulse analysis. Converting that data into the output format is still missing. 2008-04-01 18:33 bernlohr * common/mc_aux.h (1.57), common/sim_config.c (1.55), common/sim_signal.c (1.25), hess/hess_defaults.h (1.48), hess/sim_conv2hess.c (1.52): First set of additions for output of timing information. So far only central trigger time information is complete. 2008-03-20 21:15 bernlohr * common/mc_aux.h (1.56): When compiled with '-DCTA' the same maximum number of telescopes etc. as with '-DPHASE3' should be set. 2008-03-20 19:46 bernlohr * util/corsika_autoinputs.cc (1.4): Fix path where CORSIKA configuration files should be found. 2008-03-20 19:44 bernlohr * corsika/: iact.c (1.52), iact_full5.c (1.55): Fix version number typo. 2008-03-20 18:32 bernlohr * util/multipipe_corsika.c (1.5): Skip empty configuration lines. 2008-03-19 19:59 bernlohr * hess/Makefile.hess (1.67), cfg/CTA/atm_trans_2000_1_10_0_0_2000.dat (1.1): Adding a specific transmission file for 2000 m altitude. 2008-03-19 19:48 bernlohr * corsika/: Makefile.dist (1.46), README (1.39), README.tex (1.33), corsika.dox (1.14, Release_1_40), iact.c (1.51), iact_full5.c (1.54): In version 1.39 the TELFIL parameter may contain environment variables which are resolved before checking for shell meta-characters. 2008-03-18 20:00 bernlohr * corsika/: iact.c (1.50), iact_full5.c (1.53): Get rid of a compiler warning with no effect. 2008-03-18 15:09 bernlohr * util/corsika_autoinputs.cc (1.3): Avoid printf format warning even though actual output was OK. 2008-03-18 15:09 bernlohr * hess/Makefile.hess (1.66): Just for completeness adding a generic rule for compiling C++ code. 2008-03-18 14:28 bernlohr * hess/Makefile.hess (1.65): Another portability fix. 2008-03-16 19:49 bernlohr * hess/Makefile.hess (1.64): Another portability fix. 2008-03-16 19:37 bernlohr * hess/Makefile.hess (1.63), util/Makefile (1.4, prod-3-initial): Improved portability to non-HESS environment. 2008-03-13 18:06 bernlohr * corsika/: README (1.38), README.tex (1.32): README adapted because some eventio-related files have changed a bit. 2008-03-12 16:41 bernlohr * hess/sim_conv2hess.c (1.51): Attempting to store the history is useless when no output file is generated. 2008-03-12 16:40 bernlohr * doc_src/sim_hessarray.tex (1.40): Adapt documentation to TeXlive system. 2008-03-10 18:11 bernlohr * Makefile.doxygen (1.5, prod6beta1, prod5, prod-3-initial): Adapt to TeXlive installation. 2008-03-10 17:54 bernlohr * util/corsika_autoinputs.cc (1.2): Avoid warning. 2008-03-10 17:53 bernlohr * common/mc_aux.h (1.55), common/sim_config.c (1.54), common/sim_signal.c (1.24), hess/Makefile.hess (1.62), hess/hess_defaults.h (1.47): Define triggers in multiple array subsets. 2008-03-10 17:52 bernlohr * cfg/: hess/hess_bestguess.cfg (1.22), hess2/hess-phase2.cfg (1.2), hess2/hess2sector.cfg (1.5), hess2/hess2smartpixel.cfg (1.4): Updated HESS 2 configuration. 2008-03-10 17:06 bernlohr * util/: Makefile (1.3), corsika_autoinputs.cc (1.1): A much simplified version of corsika_config.cc (dbtools), without database access for either setting up the configuration nor storing the resulting parameters. 2008-03-05 17:29 bernlohr * hess/drawdrawers.cc (1.1): Add program to draw the sector definitions from a camera definition file with the optional TrigPix lines. 2008-03-05 17:19 bernlohr * hess/: hess2pix.c (1.3), hess2pix.cc (1.1): Changed C file into C++ file and fixed sector definitions at the very edges of the camera. 2008-03-05 17:19 bernlohr * cfg/hess2/: large_drawer_camera-v1-debug.dat (1.1), large_drawer_camera.dat (1.3) (utags: phase2d3, prod-3-initial, prod5, prod6beta1): Sector definitions fixed at the very edges. 2008-02-29 21:54 bernlohr * cfg/hess2/: hess2_comp_shape-v1.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2_fadc_shape-v1.dat (1.1): Add reasonably guessed pulse shapes for HESS 2. 2008-02-12 18:25 bernlohr * corsika/: Makefile.dist (1.45), README (1.37), README.tex (1.31), corsika.dox (1.13): Dokumentation updates. 2008-01-07 16:09 bernlohr * common/sim_signal.c (1.23): Don't need this debugging output all the time. 2008-01-07 16:07 bernlohr * corsika/: Makefile.dist (1.44), README (1.36), README.tex (1.30), iact.c (1.49), iact_full5.c (1.52): At least for the longer format, allow limiting the number of bunches by throwing away every other bunch when the limit is exceeded (and compensating this by increasing the bunch size of the surviving bunches.) 2007-12-04 18:44 bernlohr * corsika/: Makefile.dist (1.43), README (1.35), README.tex (1.29), iact.c (1.48), iact_full5.c (1.51): Using the extended length format when buffer sizes beyond 1 GB are requested. 2007-09-27 13:31 bernlohr * corsika/: README (1.34), README.tex (1.28): Update file sizes. 2007-09-27 13:19 bernlohr * corsika/: iact.c (1.47), iact_full5.c (1.50): A minor documentation fix. 2007-09-27 13:18 bernlohr * corsika/GNUmakefile (1.32, Release_1_40): Update dependencies in old GNUmakefile (which is only used for building the testio and listio programs with current CORSIKA versions). 2007-07-03 13:07 bernlohr * corsika/: iact.c (1.46), iact_full5.c (1.49): Explicitly closing the output pipes in the _telrne (run end) routine should help to include the CPU time spent in the telescope simulation into the total time count. 2007-05-11 15:23 bernlohr * corsika/: iact.c (1.45), iact_full5.c (1.48): Write the package version also into the data file through the recorded input lines. 2007-04-27 16:12 bernlohr * common/mc_aux.h (1.54): Allow for up to 1000 mirrors on a large telescope. 2007-04-27 16:06 bernlohr * corsika/Copyright (1.5, Release_1_40): Updating years when code got modified. 2007-04-25 19:11 bernlohr * corsika/: README (1.33), README.tex (1.27), gen_config (1.2, Release_1_40): Including EPOS interaction model in gen_config script. Minor changes to documentation. 2007-04-24 19:33 bernlohr * corsika/corsika6204f.patch (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40): Putting an older patch to CORSIKA 6.204 into CVS. 2007-04-24 19:32 bernlohr * corsika/extprm.patch (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40): Adding the EXTPRM interface to CORSIKA. 2007-04-24 19:29 bernlohr * corsika/: README (1.32), README.tex (1.26), iact.c (1.44), iact_full5.c (1.47): Adding the EXTPRM interface. 2007-03-22 19:52 bernlohr * corsika/README.tex (1.25): Add a hint on how to install updates. 2007-03-22 19:39 bernlohr * corsika/: Makefile.dist (1.42), README (1.31), README.tex (1.24), cmz_extract (1.15, prod6beta1, prod5, prod-3-initial, Release_1_40), gen_config (1.1): Preparing for new version with documentation and build scripts updated for CORSIKA 6.5xx. 2007-03-13 14:48 bernlohr * common/sim_telarray.c (1.52): Need to keep one large array away from the stack. On machines with a small stack size limit, a segmentation fault could happen otherwise. 2007-02-15 13:18 bernlohr * doc_src/sim_hessarray.tex (1.39): Fake hyperpage macro when not using the hyperref package. 2007-02-15 13:18 bernlohr * Makefile.doxygen (1.4): Beware of non-DVI-capable latex versions. 2007-02-15 12:38 bernlohr * cfg/CTA/CTA.cfg (1.1), cfg/CTA/camera_CTA.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA_0.071deg.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA_0.141deg.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA_0.201deg.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/camera_CTA_0.282deg.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/mirror_CTA.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/mirror_CTA.fig (1.1, prod6beta1, prod5, prod-3-initial), cfg/CTA/pulse_CTA.dat (1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.61): Adding CTA benchmark system configuration to CVS. 2006-09-16 18:28 bernlohr * common/: mc_aux.h (1.53), sim_telarray.c (1.51): Add an option for saving more memory - although it doesn't help a lot since most memory is used for buffering photon bunches. 2006-09-16 18:25 bernlohr * hess/sim_conv2hess.c (1.50): Show where the big chunks of memory are used. 2006-08-17 18:48 bernlohr * common/mc_aux.h (1.52), common/sim_config.c (1.53), common/sim_signal.c (1.22), hess/hess_defaults.h (1.46): For wide-angle telescope recording distant showers we need an additional photon delay parameter. 2006-08-07 17:33 bernlohr * common/sim_histograms.c (1.17): Booking and filling a few more histograms. 2006-08-02 11:50 bernlohr * cfg/hess/hess_bestguess.cfg (1.21): Defining PHASE1A for nominal efficiency of all four telescopes. 2006-07-07 18:59 bernlohr * hess/sim_conv2hess.c (1.49): In the image cleaning the threshold for isolated pixels is raised as there were too many afterpulses accepted. For very bright images the fuzzy tails of pixels below of few percent of the 2nd brightest pixel are now rejected. 2006-05-31 13:28 bernlohr * testeff.c (1.5): Fix problem introduced in last version: default airmass factor should be 1.0 and not 0.0 2006-05-30 22:35 bernlohr * hess/Makefile.hess (1.60): Simplifying the Makefile, like using Makefile.LaTeX. 2006-05-30 22:34 bernlohr * Makefile.doxygen (1.3): Take more care if we use the right LaTeX. 2006-05-30 14:04 bernlohr * hess/hess2pix.c (1.2): Adding a few more options. 2006-05-30 14:02 bernlohr * common/sim_signal.c (1.21): When VERY_FAST_SPE is deselected, the nightsky photon amplitudes where drawn from the prompt distribution. 2006-05-19 15:18 bernlohr * testeff.c (1.4): Introducing filters and printing the spectral distribution of Cherenkov and NSB light in the normal printout by default. 2006-05-18 19:17 bernlohr * cfg/common/Benn_LaPalma_sky_fnu.lis (1.1): The nightsky background brightness as seen from La Palma (off the Galactic plane, solar minimum etc.), quite comparable to Namibia. 2006-05-18 19:16 bernlohr * testeff.c (1.3): Also calculate a nightsky background factor (relative scale useful when exchanging QE or other configuration parts). 2006-05-12 15:35 bernlohr * common/mc_aux.h (1.51), common/sim_config.c (1.52), common/sim_imaging.c (1.28), common/sim_signal.c (1.20), common/sim_telarray.c (1.50), hess/sim_conv2hess.c (1.48): Adding a z coordinate for mirror positions and other minor re-organizations. 2006-04-07 13:38 bernlohr * corsika/: README (1.30), README.tex (1.23), iact.c (1.43), iact_full5.c (1.46): No impact correction for very large zenith angles and upward showers. 2006-04-06 18:50 bernlohr * corsika/: GNUmakefile (1.31), Makefile.dist (1.41), README (1.29), README.tex (1.22), iact.c (1.42), iact_full5.c (1.45): Fixing a bug in the impact correction due to CORSIKA version dependence of PRMPAR array contents. 2006-03-08 20:36 bernlohr * common/absorb.h (1.2): Make include file usable from C++. 2006-01-13 14:25 bernlohr * corsika/: README (1.28), README.tex (1.21): Adjust file sizes mentioned. 2006-01-13 12:15 bernlohr * corsika/: iact.c (1.41), iact_full5.c (1.44): Increase version number 2006-01-13 12:05 bernlohr * corsika/: iact.c (1.40), iact_full5.c (1.43): Allow for more ways to increase the maximum I/O buffer size. 2006-01-13 12:03 bernlohr * common/sim_config.c (1.51), util/multipipe_corsika.c (1.4): Allow for the CORSIKA_IO_BUFFER environment variable to increase the maximum allowed buffer size in both multipipe_corsika and sim_hessarray. 2006-01-13 12:01 bernlohr * common/mc_aux.h (1.50): Allow up to 99 telescopes to be ignored when we have 100 telescopes. 2006-01-10 19:26 bernlohr * corsika/: README (1.27), README.tex (1.20), iact.c (1.39), iact_full5.c (1.42): Add version number to IACT source and print it at startup. 2006-01-10 19:05 bernlohr * corsika/: README (1.26), README.tex (1.19): Preparing for next release. 2006-01-10 18:58 bernlohr * corsika/: iact.c (1.38), iact_full5.c (1.41): Add correction of approximate impact position of primary at ground level, due to geomagnetic field. 2006-01-10 18:56 bernlohr * corsika/atmo.c (1.10, Release_1_40): Changes to atmospheric profile fitting: adding a second iteration, fourth layer adjustable upwards, amend table point corresponding to top of atmosphere. 2005-12-22 19:46 bernlohr * cfg/: hess/hess_bestguess.cfg (1.20), hess3/hess3.cfg (1.3, prod-3-initial): Fixing and extending setup for phase3 study. 2005-11-29 17:39 bernlohr * corsika/: iact.c (1.37), iact_full5.c (1.40): Even more checks for space/quota/permissions etc. for temporary files. 2005-11-29 11:49 bernlohr * corsika/: Makefile.dist (1.40), iact.c (1.36), iact_full5.c (1.39): Failure to write temporary photon bunch files is made a fatal error. 2005-11-22 14:34 bernlohr * common/mc_aux.h (1.49): For the HESS phase 3 study allow up to 100 telescopes. 2005-11-16 14:04 bernlohr * cfg/hess3/hess3.cfg (1.2): Increase the tailcut scale for phase3 study due to higher QE and nightsky noise. 2005-11-15 18:26 bernlohr * cfg/hess/hess_bestguess.cfg (1.19): Fix typo: it must be a percent rather than a '#' for a comment line. 2005-11-15 15:19 bernlohr * hess.cfg-example (1.4, prod6beta1, prod5, prod-3-initial): Updating hess.cfg-example to match hess.cfg. 2005-11-15 15:10 bernlohr * cfg/hess/hess.cfg (1.12, prod-3-initial): First-time user starting with default configuration file 'hess.cfg' should now be effectively running 'PHASE1B' simulation. 2005-11-15 14:54 bernlohr * cfg/hess/hess_bestguess.cfg (1.18): Restore 92% efficiency for CT3 in simulations with 'PHASE1' instead of 'PHASE1B' defined. 2005-11-14 16:06 bernlohr * doc_src/sim_hessarray.tex (1.38): Documentation updates. 2005-10-24 16:30 bernlohr * hess/: Makefile.hess (1.59), hesspix3.c (1.4): Add 0.8 deg and 1.5 deg camera configurations to the distribution. 2005-10-24 16:29 bernlohr * cfg/hess/hess_bestguess.cfg (1.17): Cannot use a percent sign in a message since it starts a comment. 2005-10-24 12:28 bernlohr * cfg/hess/hess_spe_gauss0.4.dat (1.1, prod6beta1, prod5, prod-3-initial): A Gaussian single-photo-electron ampltitude distribution which looks more like what the calibration process assumes but not like reality. This file was sitting around for quite some time but never was checked in. 2005-10-24 12:21 bernlohr * cfg/hess/atmprof20.dat (1.2): Well, this profile was already in the hess5000 directory. 2005-10-24 12:19 bernlohr * cfg/hess/atmprof20.dat (1.1): South America model atmospheric profile. 2005-10-24 11:56 bernlohr * cfg/hess/: hess_camera_0.8deg.dat (1.1), hess_camera_1.5deg.dat (1.1) (utags: prod-3-initial, prod5, prod6beta1): Adding camera definitions with reduced trigger area definitions of 0.8 deg diameter and 1.5 deg diameter each. 2005-10-24 11:54 bernlohr * cfg/hess/: hess_camera.dat (1.5), hess_camera_25mrad.dat (1.3), hess_camera_30mrad.dat (1.3) (utags: prod-3-initial, prod5, prod6beta1): After studying the drawings of the camera and the funnels again, changed pixel size from 4.15 cm to 4.10 cm and increased the gap between pixels to 0.10 cm (the both walls being 0.04 cm thick each plus some real gap). 2005-10-18 18:49 bernlohr * cfg/hess/hess_bestguess.cfg (1.16): Define PHASE1B setup with 70% of nominal optical efficiency. 2005-10-14 14:53 bernlohr * hess/Makefile.hess (1.58): Use the shared library for hessio since the static one is no longer built. 2005-10-13 18:48 bernlohr * common/mc_aux.h (1.48), common/sim_config.c (1.50), hess/hess_defaults.h (1.45), hess/sim_conv2hess.c (1.47): Tail-cut levels made adjustable by a common scaling factor. 2005-10-13 16:35 bernlohr * cfg/hess/hess_bestguess.cfg (1.15), cfg/hess3/hess3.cfg (1.1), cfg/hess3/hess3_large_dish.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess3/hess3_large_camera.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess3/hess3_large_mirrors.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess3/hess3_small_camera.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess3/hess3_small_mirrors.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess3/hess_qe2times1.5.dat (1.1, prod6beta1, prod5, prod-3-initial), common/mc_aux.h (1.47), hess/Makefile.hess (1.57), hess/sim_conv2hess.c (1.46), hess/smartpix.cc (1.6): Prepare for performance studies for HESS-3. 2005-09-25 14:03 bernlohr * corsika/GNUmakefile (1.30): Take care that neither FLUKA nor DPMJET can be used in 64 bit mode. 2005-09-14 19:59 bernlohr * corsika/: iact_full5.c (1.38), iact.c (1.35): Aborting CORSIKA on too many output errors. 2005-09-14 19:21 bernlohr * hess/Makefile.hess (1.56): Need to export also the different mirror configuration for CT3. 2005-09-14 19:21 bernlohr * corsika/: corsika.dox (1.12), iact.c (1.34): Documentation only. 2005-09-07 11:28 bernlohr * corsika/: Makefile.dist (1.39), README (1.25), README.tex (1.18), corsika.dox (1.11), iact.c (1.33), iact_full5.c (1.37): Documentation updates. 2005-09-07 11:25 bernlohr * common/sim_histograms.c (1.16): Get pulse shape separately for pixels with trigger enabled (interesting in case of limited trigger region). 2005-08-18 20:38 bernlohr * sim_hessarray.dox (1.4): Build documentation only for files actually in distribution. 2005-08-18 19:41 bernlohr * corsika/: README (1.24), README.tex (1.17), corsika.dox (1.10): Documentation updates. 2005-08-12 13:25 bernlohr * corsika/: iact.c (1.32), iact_full5.c (1.36): When changing the code for the lateral distributions (with SHOW_VERTICAL_STRUCT extension) yesterday, I mixed up meters and centimeters. 2005-08-12 13:24 bernlohr * corsika/Makefile.dist (1.38): Distribute whatever patches are currently in this directory rather than specific patches. 2005-08-11 19:04 bernlohr * corsika/: Makefile.dist (1.37), iact.c (1.31), iact_full5.c (1.35): Add an extension to get the angular distribution of all Cherenkov light and other things. 2005-08-10 16:49 bernlohr * corsika/iact.c (1.30): Re-generated after last commit. 2005-08-10 16:48 bernlohr * corsika/Makefile.dist (1.36): A few more files were missing from the private export. 2005-08-10 16:32 bernlohr * corsika/iact_full5.c (1.34): Fix compilation problem with SHOW_VERTICAL_STRUCT extension. 2005-08-10 16:31 bernlohr * corsika/Makefile.dist (1.35): For the extensions we need a few files from the HESS configuration. 2005-08-09 21:04 bernlohr * corsika/: Copyright (1.4), README (1.23), README.tex (1.16): Documentation changes. 2005-08-09 20:11 bernlohr * corsika/: GNUmakefile (1.29), Makefile.dist (1.34), README (1.22), README.tex (1.15), cmz_extract (1.14), iact.c (1.29), iact_full5.c (1.33): Documentation updates, build improvements, and now storing the emitting particle data when IACTEXT option is selected. 2005-08-08 19:18 bernlohr * corsika/: gd_image.c (1.2), gd_image.h (1.1) (utags: Release_1_40, prod-3-initial): Interface in separate header file. This has been around for some time but was not checked in. 2005-08-08 18:58 bernlohr * corsika/: GNUmakefile (1.28), cmz_extract (1.13), corsika.dox (1.9): Build procedure checked with different interaction models. 2005-08-08 18:57 bernlohr * corsika/atmo.c (1.9): Avoid warning with GCC 4.0. 2005-08-08 13:14 bernlohr * corsika/corsika.dox (1.8): Version number update 2005-08-04 18:32 bernlohr * corsika/: GNUmakefile (1.27), Makefile.dist (1.33), fake_time.c (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40), start_corsika_venusfluka (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40): Makefile updates for better handling of other interaction models. Note: QGSJET is now the default interaction model. 2005-07-26 16:46 bernlohr * corsika/: iact.c (1.28), iact_full5.c (1.32): Updating extended mode interface (which is not yet provided by stock CORSIKA). Documentation updates. 2005-07-26 16:44 bernlohr * corsika/: GNUmakefile (1.26), cmz_extract (1.12): Updating to options in CORSIKA v6.2xx. Removing support for totally outdated options. 2005-07-26 16:30 bernlohr * hess/hesspix3.c (1.3): All pixels in trigger by default. 2005-07-26 16:28 bernlohr * common/sim_histograms.c (1.15): Add pulse shape histograms also for low-gain channel. 2005-06-09 19:36 bernlohr * corsika/corsika.dox (1.7): Version number update 2005-06-08 20:02 bernlohr * corsika/: Makefile.dist (1.32), atmo.c (1.8), atmo.h (1.2, Release_1_40), cmz_extract (1.11), iact.c (1.27), iact_full5.c (1.31): Some documentation tweaks and some changes for the SLANT option in CORSIKA 6.2xx. 2005-06-08 17:39 bernlohr * corsika/: GNUmakefile (1.25), cmz_extract (1.10), iact_full5.c (1.30): Adapt to new CORSIKA options and more flexible movie production. 2005-05-24 16:59 bernlohr * corsika/: GNUmakefile (1.24), Makefile.dist (1.31), README (1.21), README.tex (1.14), corsika.dox (1.6), iact.c (1.26): Allow to change the I/O buffer size maximum. 2005-05-24 16:56 bernlohr * corsika/iact_full5.c (1.29): Allow English texts in moviews. 2005-05-19 12:10 bernlohr * util/multipipe_corsika.c (1.3): Fixing bug that could lead to segmentation faults after a pipe is closed. 2005-04-14 15:45 bernlohr * hess/Makefile.hess (1.55): Since we have a number of gcc-specific flags for compiling, also use gcc (rather than g++) for getting the automatic dependencies. 2005-04-14 15:42 bernlohr * common/sim_config.c (1.49): When the mirror reflectivity is degraded, the background light is now reduced by the same factor. 2005-04-13 18:47 bernlohr * hess/Makefile.hess (1.54), hess/smartpix.cc (1.5), cfg/hess2/large_smartpixel_camera_0.10deg.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), cfg/hess2/large_smartpixel_camera_0.10deg2.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial): Try a SmartPixel camera with 0.10 deg pixel size for comparison. 2005-04-07 16:18 bernlohr * common/sim_telarray.c (1.49): Increase maximum numbers of bunches and p.e. to better match current practice of IO_BUFFER limits. 2005-03-22 18:27 bernlohr * hess/sim_conv2hess.c (1.45): The unweighted histograms against 3-D core distance and log10(E) are included in the standard output as well. 2005-03-22 18:26 bernlohr * corsika/GNUmakefile (1.23): Build CORSIKA also with other interaction models. 2005-03-22 18:25 bernlohr * hess/Makefile.hess (1.53): When packaging the distributed files, check that they are all in CVS. 2005-03-04 19:03 bernlohr * cfg/hess2/single_pixel_camera.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), cfg/hess5000/atm_trans_5000.dat (1.1), doc_src/fig/psfAlt.eps (1.1, prod6beta1, prod5, prod-3-initial), doc_src/fig/psfAlt.png (1.1, prod6beta1, prod5, prod-3-initial): Files that were not included in the CVS repository but should be. 2005-03-04 18:35 bernlohr * hess/Makefile.hess (1.52): Distribute additional configuration files. 2005-03-04 18:35 bernlohr * common/: sim_config.c (1.48), sim_imaging.c (1.27), sim_telarray.c (1.48): For arrival times of off-axis starlight photons in starlight ray-tracing, we need an additional inclination correction. 2005-03-04 18:32 bernlohr * cfg/: hess/hess-ct3.cfg (1.1, prod-3-initial), hess/hess-phase1.cfg (1.1, prod-3-initial), hess/hess_bestguess.cfg (1.14), hess2/hess-phase2.cfg (1.1), hess2/hess2_common.cfg (1.1), hess2/hess2_dish.cfg (1.2), hess2/hess2sector.cfg (1.4), hess2/hess2smartpixel.cfg (1.3), hess2/hessII-mirrors-0850-r.dat (1.2): Better integration of phase 2 configuration files. 2005-03-04 18:17 bernlohr * cfg/hess/: hess_mirrors.dat (1.4), hess_mirrors_ct3.dat (1.1): Explicitly include the fact that CT3 has 2 empty mirror positions and that CT1, CT2, and CT4 have one empty position, on the other side. 2005-02-21 18:25 bernlohr * hess/Makefile.hess (1.51): Fix type in exported file list. 2005-02-21 18:24 bernlohr * hess/Makefile.hess (1.50): Including more HESS phase II configuration files in distribution. 2005-02-21 17:55 bernlohr * doc_src/sim_hessarray.tex (1.37): Include new ALL_WL_RANDOM configuration keyword in documentation. 2005-02-21 17:28 bernlohr * common/mc_aux.h (1.46), common/sim_config.c (1.47), common/sim_telarray.c (1.47), hess/hess_defaults.h (1.44): If direct Cherenkov light was marked by wavelength 1., we need some option to process this light just as the shower light. 2005-02-21 17:27 bernlohr * corsika/: GNUmakefile (1.22), Makefile.dist (1.30), iact.c (1.25), iact_full5.c (1.28): A few more tweaks for the marked direct Cherenkov light. 2005-02-21 16:10 bernlohr * corsika/iact_full5.c (1.27): Allow marking of direct Cherenkov light by wavelength of 1. 2005-02-21 12:58 bernlohr * cfg/hess2/: hess2.cfg (1.4), hess2sector.cfg (1.3), hess2smartpixel.cfg (1.2): Phase II telescope configuration now making use of the common dish definition. 2005-02-21 12:56 bernlohr * cfg/hess2/hess2_dish.cfg (1.1): Common dish definition parameters for a HESS phase II telescope. 2005-02-21 12:53 bernlohr * cfg/hess2/large_smartpixel_camera.dat (1.3, prod6beta1, phase2d3, prod5, prod-3-initial): Minor changes . 2005-02-21 12:53 bernlohr * cfg/hess2/large_drawer_camera.dat (1.2): Minor change . 2005-02-21 12:53 bernlohr * cfg/hess2/hessII-mirrors-0850-n.dat (1.2, prod6beta1, phase2d3, prod5, prod-3-initial): Mirror position in Rene's files are in the right orientation. 2005-02-21 12:53 bernlohr * cfg/hess2/hessII-mirrors-0850-r.dat (1.1): Mirror positions like in Rene's file but the other way round. 2005-02-16 17:00 bernlohr * cfg/hess2/: hessII-mirrors-0850-1-3600.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0850-1-3674.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0850-n.dat (1.1), hessII-mirrors-0978-1-3689.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hessII-mirrors-0978-n.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial): Mirror configurations for HESS-II as provided by Rene. 2005-02-07 10:50 bernlohr * corsika/iact_full5.c (1.26): For the WRITE_PHOTONS special case add an extra block at the beginning of an event. 2005-01-07 21:15 bernlohr * doc_src/sim_hessarray.tex (1.36): Modification date of documentation. 2005-01-07 19:56 bernlohr * common/mc_aux.h (1.45), common/sim_config.c (1.46), common/sim_imaging.c (1.26), doc_src/sim_hessarray.tex (1.35), hess/hess_defaults.h (1.43): Allow for separate specification of overall focal length, dish shape scale length, and mirror tile focal length. 2004-10-08 20:19 bernlohr * util/multipipe_corsika.c (1.2): A utility program which takes a Corsika IACT input pipe and distributes it to one or more output streams (normally sim_hessarray), after setting environment variables indicating the primaries, average direction and so on. 2004-10-08 20:18 bernlohr * corsika/iact_full5.c (1.25): A few more diagnostic outputs in the private version of iact.c 2004-10-08 20:17 bernlohr * common/sim_telarray.c (1.46): Just for completeness the calculation of the global time offset is different when Corsika option 'TSTART T' was used. This does not really matter because instead of the number here, the number provided by the Corsika IACT interface is actually used. 2004-09-30 15:21 bernlohr * util/phase1_run.sh (1.1, prod5, prod-3-initial): A script for production purposes on the MPIK linux cluster. 2004-09-30 14:53 bernlohr * hess/Makefile.hess (1.49), util/multipipe_corsika.c (1.1): Add multipipe_corsika command as a further utility. 2004-09-30 14:52 bernlohr * common/sim_imaging.c (1.25): Special treatment of camera in explicit raytracing of masts when light source is nearby (normally at 2f point). 2004-09-24 17:51 bernlohr * cfg/hess/hess_masts.dat (1.2), common/sim_config.c (1.45), common/sim_imaging.c (1.24): Fix raytracing from and to 2-f point. 2004-09-24 17:51 bernlohr * doc_src/sim_hessarray.tex (1.34): Minor documentation update 2004-09-17 14:55 bernlohr * cfg/hess2/hess2sector.cfg (1.2): The sector type camera does not fit in a 220 cm body. Has to be a bit larger. 2004-09-17 14:54 bernlohr * common/: mc_aux.h (1.44), sim_imaging.c (1.23): Bug fixed in hexagonal mirror boundary check. 2004-09-16 19:31 bernlohr * hess/: Makefile.hess (1.48), hess_defaults.h (1.42): Incorporating some small changes by Rene (including point spread function parameters) and begin hunting a possible issue with hexagonal mirrors. 2004-09-16 19:28 bernlohr * corsika/Makefile.dist (1.29): Increment version count. 2004-09-16 19:17 bernlohr * cfg/hess/hess_bestguess.cfg (1.13), common/mc_aux.h (1.43), common/sim_imaging.c (1.22): Incorporating some small changes by Rene (including point spread function parameters) and begin hunting a possible issue with hexagonal mirrors. 2004-08-27 14:30 bernlohr * corsika/GNUmakefile (1.21): On AMD64, no -malign-double option may be used. 2004-08-25 15:09 bernlohr * nsb_gradient.c (1.1, prod6beta1, prod5, prod-3-initial): A little utility program that generates statements for a gradient in the night sky background. 2004-08-25 15:08 bernlohr * corsika/: GNUmakefile (1.20), Makefile.dist (1.28), README (1.20), README.tex (1.13), corsika.dox (1.5): Latest distribution not yet committed. 2004-08-25 15:07 bernlohr * common/sim_config.c (1.44): Allow a -C 'include fname' option on the command line. 2004-06-30 16:12 bernlohr * sim_hessarray.dox (1.3), cfg/hess2/hess2sector.cfg (1.1), cfg/hess2/hess2smartpixel.cfg (1.1): Add configuration files for 2 possible HESS phase 2 layouts. 2004-06-22 16:49 bernlohr * hess/hess_defaults.h (1.41): Tracking (in real life: after pointing correction) is more accurate than initially thought. 2004-06-22 15:41 bernlohr * common/: sim_config.c (1.43), sim_imaging.c (1.21), sim_signal.c (1.19): De-activate code for old-style (hexagon or square) camera configuration. Only compiling the 'custom' style by default from now on. 2004-06-22 13:38 bernlohr * common/: mc_aux.h (1.42), sim_imaging.c (1.20), sim_signal.c (1.18): Allow for trigger configurations were some pixels in a trigger group must have fired, like the central pixel in a SmartPixel group of 7. 2004-06-22 13:37 bernlohr * cfg/hess2/large_smartpixel_camera.dat (1.2): In SmartPixel configuration the central pixel in a trigger group must always have fired. This reduces the random rate by a factor 21/35. 2004-06-21 19:20 bernlohr * cfg/hess2/: pulse_1.0ns.dat (1.1), pulse_1.5ns.dat (1.1), pulse_2.0ns.dat (1.1), pulse_2.5ns.dat (1.1), pulse_3.0ns.dat (1.1), pulse_3.5ns.dat (1.1), pulse_4.0ns.dat (1.1) (utags: phase2d3, prod-3-initial, prod5, prod6beta1): Add Gaussian pulse profiles of various sigmas to CVS. 2004-06-21 19:17 bernlohr * hess/smartpix.cc (1.4): Show program syntax. Write format description to generated output. 2004-06-15 19:53 bernlohr * corsika/: GNUmakefile (1.19), README (1.19), README.tex (1.12): Documentation updates. 2004-06-15 19:51 bernlohr * common/: rndm_table.c (1.3), sim_config.c (1.42): Fixing for use of possibly uninitialized variables complained by valgrind. 2004-06-02 19:09 bernlohr * corsika/: iact.c (1.24), iact_full5.c (1.24): Cosmetic changes. 2004-05-23 18:08 bernlohr * corsika/: Makefile.dist (1.27), README (1.18), README.tex (1.11): New version 1.27 2004-05-23 17:27 bernlohr * corsika/GNUmakefile (1.18): Some restructuring and removal of targets like 'corsika_venus_iact'. 2004-05-23 17:26 bernlohr * corsika/: Makefile (1.11), Makefile.old (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40): Since the old Makefile will not be maintained any more, rename it to make this clear. 2004-05-14 13:00 bernlohr * hess/Makefile.hess (1.47): Add HESS-2 drawer-type camera configuration to tar ball. 2004-05-14 12:50 bernlohr * hess/Makefile.hess (1.46): Need to generate version.h file if it does not exist. 2004-05-14 12:42 bernlohr * cfg/hess2/large_drawer_camera.dat (1.1): A Paris-style camera definition comparable in size to the smart-pixel definition. 2004-05-14 12:40 bernlohr * common/sim_histograms.c (1.14): Add histograms of pulse shapes as seen in the readout window. 2004-05-14 12:40 bernlohr * cfg/hess2/hess2.cfg (1.3): Changing a couple of default parameters for HESS-2 simulations. 2004-05-14 12:38 bernlohr * testeff.c (1.2): Update to current default funnel parameter file and include als HESS-2 directories. 2004-04-23 21:00 bernlohr * hess/smartpix.cc (1.3): Also add a gap between pixels for the smart pixel configuration. 2004-04-23 20:54 bernlohr * hess/: hesspix2.c (1.7), hesspix3.c (1.2): Add also a gap between pixels in current HESS phase 1 cameras. 2004-04-23 20:46 bernlohr * hess/: hess2pix.c (1.1), hesspix2.c (1.6): Generate also a drawer/sector type camera configuration for HESS-II. 2004-02-11 19:29 bernlohr * common/sim_telarray.c (1.45): Allow to dump current state of histograms through 'kill -HUP pid' while the program is still running. 2004-02-10 17:20 bernlohr * hess/Makefile.hess (1.45): Include a couple of further files for HESS-II simulations in the distribution. 2004-02-06 13:00 bernlohr * cfg/hess/hess_bestguess.cfg (1.12): The pedestal was adjusted to more closely match measured data (except for the signed/unsigned number type). In the common stereo modes, the trigger condition 2.5 pixels abover 112 mV is now always used instead of 3.5 pixels above 140 mV. 2004-01-04 17:44 bernlohr * hess/hess_defaults.h (1.40): Extend I/O buffer limit to 200 MB (as in iact.c). 2004-01-04 17:43 bernlohr * corsika/: GNUmakefile (1.17), Makefile (1.10), Makefile.dist (1.26), README (1.17), README.tex (1.10), iact.c (1.23), iact_full5.c (1.23), sampling.c (1.2, Release_1_40): Various updates and fixes for the sampling mode that should have been committed before Christmas. Extend I/O buffer limit to 200 MB. 2003-11-28 19:25 bernlohr * common/mc_aux.h (1.41): Maximum ADC value per time slice is 4095 and not 2048. 2003-11-26 18:11 bernlohr * corsika/: GNUmakefile (1.16), Makefile (1.9), Makefile.dist (1.25), README (1.16), README.tex (1.9), iact.c (1.22), iact_full5.c (1.22), sampling.c (1.1): More changes towards importance sampling. 2003-11-22 01:20 bernlohr * common/sim_telarray.c (1.44): Remove unnecessary debugging output. 2003-11-22 01:19 bernlohr * doc_src/sim_hessarray.tex (1.33): Describe new ALWAYS_AWEIGHTs option in documentation. 2003-11-22 01:18 bernlohr * corsika/: iact.c (1.21), iact_full5.c (1.21): Introducing a general IACT specific option interface so we do not need to change something in CORSIKA every time. 2003-11-21 20:10 bernlohr * hess/: hess_defaults.h (1.39), sim_conv2hess.c (1.44): Passing the area weights through to the output. 2003-11-21 17:57 bernlohr * common/: mc_aux.h (1.40), sim_config.c (1.41), sim_telarray.c (1.43): Passing the area weights through to the output. 2003-11-17 21:07 bernlohr * common/sim_telarray.c (1.42): Adding area weights as provided by CORSIKA IACT interface (uniform or importance sampled) were actually already committed with the previous revision. 2003-11-17 20:53 bernlohr * common/: mc_aux.h (1.39), sim_histograms.c (1.13), sim_telarray.c (1.41): Histogram 1007 was filled without proper weights. 2003-11-17 17:24 bernlohr * corsika/: Makefile.dist (1.24), iact.c (1.20), iact_full5.c (1.20): Fixing bugs in weighted sampling. 2003-11-12 20:28 bernlohr * common/: mc_aux.h (1.38), sim_histograms.c (1.12), sim_telarray.c (1.40): Add histograms where CPU time was actually spent and what the corresponding amounts of data are. Delay the conversion of all configuration until the relevant information is complete, so that we can really omit ignored telescopes. 2003-11-12 20:24 bernlohr * hess/sim_conv2hess.c (1.43): Omit ignored telescopes completely from output. 2003-11-06 20:42 bernlohr * cfg/hess5000/atmprof20.dat (1.2, prod6beta1, prod5, prod-3-initial): Profile was broken because of duplicate line. Now re-evaluated. 2003-11-06 20:41 bernlohr * cfg/hess2/hess2.cfg (1.2): Use different trigger by default. 2003-11-05 18:17 bernlohr * hess/Makefile.hess (1.44): Add HESS 2/5000 configuration files to export list. 2003-11-05 18:11 bernlohr * hess/Makefile.hess (1.43): Take changed configuration path structure into account. 2003-11-05 18:10 bernlohr * common/sim_signal.c (1.17): Get rid of one compiler warning. CVS ---------------------------------------------------------------------- 2003-11-05 18:09 bernlohr * cfg/: hess/flen3500_600m2_hex.dat (1.2), hess/hesscam1536.dat (1.2), hess/huge_dish_flen3450.dat (1.2), hess/large_dish_flen3500.dat (1.2), hess/large_smartpixel_camera.dat (1.2), hess/smartpixel_camera.dat (1.3), hess2/flen3500_600m2_hex.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2/hesscam1536.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2/huge_dish_flen3450.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2/large_dish_flen3500.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess2/large_smartpixel_camera.dat (1.1), hess2/smartpixel_camera.dat (1.1, prod6beta1, phase2d3, prod5, prod-3-initial), hess5000/atm_trans_5000_1_10_0_0_2000.dat (1.1), hess5000/atm_trans_5000_1_10_0_0_5000.dat (1.1), hess5000/atm_trans_5000_1_1_0_0_5000.dat (1.1), hess5000/atm_trans_5000_1_6_0_0_5000.dat (1.1), hess5000/atmprof20.dat (1.1): Configuration files for large dish, large camera and/or smart pixels were moved from cfg/hess to cfg/hess2 and additional files for high-altitude were created in cfg/hess5000. 2003-10-11 17:09 bernlohr * common/mc_aux.h (1.37), common/sim_config.c (1.40), common/sim_telarray.c (1.39), hess/hess_defaults.h (1.38): LED calibration events should better have the lid closed. 2003-10-10 17:56 bernlohr * common/sim_telarray.c (1.38): Write number of photoelectrons in laser events to standard output. 2003-10-08 20:23 bernlohr * common/mc_aux.h (1.36), common/sim_config.c (1.39), common/sim_signal.c (1.16), common/sim_telarray.c (1.37), hess/hess_defaults.h (1.37), hess/sim_conv2hess.c (1.42): Make calibration events (pedestals and laser/LED) work now. 2003-10-08 20:23 bernlohr * cfg/hess/hess.cfg (1.11): Not overriding so many defaults any more. 2003-09-23 19:37 bernlohr * common/mc_aux.h (1.35), common/sim_config.c (1.38), common/sim_signal.c (1.15), hess/hess_defaults.h (1.36), hess/sim_conv2hess.c (1.41): Prepare for telescope-dependent thresholds (but not active by default yet.) A bug was fixed where laser calibration parameters for some telescopes could be empty in stereo output data. 2003-09-23 19:35 bernlohr * cfg/hess/hess_bestguess.cfg (1.11): Prepare for telescope-dependent thresholds (but not active by default yet.) 2003-08-15 17:45 bernlohr * corsika/gd_image.c (1.1): Interface functions to the gd graphics library. 2003-07-18 14:30 bernlohr * common/: sim_signal.c (1.14), sim_telarray.c (1.36): Taking more care on which input files are suitable for lseek. 2003-07-18 14:28 bernlohr * cfg/hess/: hess_camera.dat (1.4), hess_camera_25mrad.dat (1.2), hess_camera_30mrad.dat (1.2), hess_camera_73.dat (1.4, prod6beta1, prod5, prod-3-initial), hess_camera_8broken.dat (1.2, prod6beta1, prod5, prod-3-initial), hess_camera_8broken_25mrad.dat (1.2, prod6beta1, prod5, prod-3-initial), hess_camera_funneltest.dat (1.2, prod6beta1, prod5, prod-3-initial), hess_camera_halftrg.dat (1.2, prod6beta1, prod5, prod-3-initial): Camera configuration files have been modified for recalculated funnel efficiency file, in better agreement with measured data. 2003-07-18 14:27 bernlohr * cfg/hess/hess_bestguess.cfg (1.10): Should not use semicolon in comments, since it starts a new line. 2003-07-16 13:30 bernlohr * cfg/hess/hess_bestguess.cfg (1.9): Corrected some comments in the file. Values are unchanged. 2003-07-04 21:03 bernlohr * common/mc_aux.h (1.34), common/sim_config.c (1.37), common/sim_imaging.c (1.19), common/sim_telarray.c (1.35), doc_src/sim_hessarray.tex (1.32), hess/Makefile.hess (1.42), hess/hess_defaults.h (1.35): The point spread function is now zenith angle dependent. 2003-07-04 21:03 bernlohr * cfg/hess/hess_bestguess.cfg (1.8): Added NORMAL_MODE (to be combined with either SINGLE, CT2_CT3_SOFTSTEREO, or PHASE1) to adapt all settings to actual experiment, including less than expected light throughput of CT3. 2003-06-18 15:33 bernlohr * common/sim_config.c (1.36): More output columns in the 'starlight' raytracing (where 'stars' can now be at a finite distance, to check the focusing). 2003-06-18 15:32 bernlohr * cfg/hess/hess.cfg (1.10): One-letter typo in comment. 2003-06-18 15:31 bernlohr * corsika/cmz_extract (1.9): Prefer local version of cmz if available. 2003-06-07 13:01 bernlohr * cfg/hess/hess_camera_funneltest.dat (1.1), hess/Makefile.hess (1.41): Another addition is a camera configuration which uses the measured funnel efficiencies although the angle-dependence of the naked PMTs is not corrected there. 2003-06-07 12:58 bernlohr * hess/Makefile.hess (1.40): Distribute new funnel efficiency curves as well. 2003-06-07 12:57 bernlohr * corsika/Makefile.dist (1.23): Apart from a public distribution package, there is now a private package as well. 2003-06-07 12:56 bernlohr * cfg/hess/: hess_camera.dat (1.3), hess_camera_73.dat (1.3), hess_funnels_r65.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r68.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r70.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r73.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r75.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r78.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_r80.dat (1.1, prod6beta1, prod5, prod-3-initial): More calculated funnel efficiency curves (with the actual geometry) were added. The default camera configuration was updated to use to use one of the new tables. 2003-05-08 20:42 bernlohr * testeff.c (1.1), hess/Makefile.hess (1.39): Add a program evaluating the overall efficiency. 2003-05-08 20:30 bernlohr * common/: mc_aux.h (1.33), sim_config.c (1.35), sim_imaging.c (1.18), sim_telarray.c (1.34): Add a optional 'funnel efficiency as a function of wavelength' table to the camera configuration. Since its value is multiplied with that from the angle dependent table, the average of the later table is corrected in the former, if present. In addition, a bug in the interpolation of the angle dependent table was fixed. 2003-05-08 20:23 bernlohr * cfg/hess/hess_funnels_wl.dat (1.2, prod6beta1, prod5, prod-3-initial): This table supplemented with the angle range over which it is averaged. 2003-05-08 20:21 bernlohr * corsika/iact.c (1.19): Adapt speed of Cherenkov light to altitude and atmospheric profile. 2003-05-08 20:17 bernlohr * hess/hess_defaults.h (1.34): Imaging parameters adapted to latest values from Rene Cornils. 2003-05-05 18:39 bernlohr * corsika/: GNUmakefile (1.15), sim_skeleton.c (1.5, Release_1_40): Allow building and running of a simple skeleton user program. 2003-05-05 18:38 bernlohr * corsika/iact_full5.c (1.19): Updates and fixes for histograms filled. 2003-04-30 23:49 bernlohr * hess/Makefile.hess (1.38): Fix a typo in the new data file added before. 2003-04-30 23:48 bernlohr * cfg/hess/: hess_funnels_angle.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_funnels_wl.dat (1.1): New funnel data based on measurements (which are not yet documented). Use with care. 2003-04-30 23:45 bernlohr * corsika/Makefile.dist (1.22): Increment release number. 2003-04-30 23:44 bernlohr * corsika/: iact.c (1.18), iact_full5.c (1.18): New extension for filling histograms. 2003-04-30 23:42 bernlohr * hess/Makefile.hess (1.37): Add new configuration files to export list. 2003-04-30 23:41 bernlohr * common/sim_imaging.c (1.17): Fix strange characters in output string. 2003-04-14 19:07 bernlohr * hess/sim_conv2hess.c (1.40): Save the CORSIKA input file and the sim_hessarray configuration into the output file produced. 2003-04-14 19:06 bernlohr * corsika/: Makefile.dist (1.21), iact.c (1.17), iact_full5.c (1.17): More consistent change of IACT options flag in runheader. 2003-04-14 19:03 bernlohr * common/: mc_aux.h (1.32), sim_config.c (1.34), sim_telarray.c (1.33): Save the CORSIKA input file and the sim_hessarray configuration into the output file produced. 2003-03-27 15:05 bernlohr * corsika/: corsika.dox (1.4), iact.c (1.16), iact_full5.c (1.16): Output all `do_print' messages to stdout. 2003-03-22 14:47 bernlohr * corsika/: GNUmakefile (1.14), Makefile.dist (1.20), README (1.15), README.tex (1.8), cmz_extract (1.8): Automatic CORSIKA version detection, cmz_extract adapted for CORSIKA 6.146, documentation updated. 2003-03-19 21:01 bernlohr * hess/hess_defaults.h (1.33): Make clear that with explicit raytracing of masts, there is no additional transparency factor of the telescope. 2003-03-19 21:00 bernlohr * hess/sim_conv2hess.c (1.39): Put image cleaning and 2nd moments analysis in separate routines. Began on iteration of Hillas parameters but not finished yet. 2003-03-19 20:56 bernlohr * common/: mc_aux.h (1.31), sim_config.c (1.33), sim_histograms.c (1.11), sim_telarray.c (1.32): Support for VOLUMEDET option in CORSIKA added. Also add reporting what options were actually compiled and used in CORSIKA. 2003-03-19 20:51 bernlohr * corsika/: GNUmakefile (1.13), iact.c (1.15), iact_full5.c (1.15): The VOLUMEDET option is now fully supported and is made the default. 2003-03-19 15:55 bernlohr * corsika/: GNUmakefile (1.12), README (1.14), README.tex (1.7), iact.c (1.14), iact_full5.c (1.14): Check if conditions for compact format are fulfilled. 2003-03-19 13:01 bernlohr * corsika/: Makefile.dist (1.19), iact.c (1.13), iact_full5.c (1.13): Dieter Heck has introduced a double-precision random generator in CORSIKA. 2003-01-30 19:15 bernlohr * doc_src/sim_hessarray.tex (1.31): Well, we have 2003 now. 2003-01-30 19:13 bernlohr * doc_src/sim_hessarray.tex (1.30): Forgot the modification date. 2003-01-30 19:12 bernlohr * doc_src/sim_hessarray.tex (1.29): Mention the on-the-fly compression/decompression in the docs. 2003-01-30 18:57 bernlohr * corsika/: README (1.13), README.tex (1.6): Mention that output can be compressed on the fly now. 2003-01-30 18:45 bernlohr * corsika/Makefile.dist (1.18): Take changed location of fileopen.c into account. 2003-01-30 18:36 bernlohr * common/sim_absorb.c (1.7), common/sim_config.c (1.32), common/sim_histograms.c (1.10), common/sim_imaging.c (1.16), common/sim_signal.c (1.13), common/sim_telarray.c (1.31), corsika/Makefile.dist (1.17), corsika/README (1.12), corsika/atmo.c (1.7), corsika/corsika.dox (1.3), corsika/iact.c (1.12), corsika/iact_full5.c (1.12), hess/Makefile.hess (1.36), hess/sim_conv2hess.c (1.38): More use is made of fileopen/fileclose and its new capability of writing and reading gzip and bzip2 compressed files on the fly. 2003-01-30 18:35 bernlohr * common/fileopen.c (1.6): This file was moved to the hessio package. 2003-01-17 19:46 bernlohr * hess/sim_conv2hess.c (1.37): Now writing lists of trigger pixels and image-selected pixels to output. 2003-01-10 20:19 bernlohr * corsika/: Makefile.dist (1.16), README (1.11): Version number of IACT/ATMO package increased. 2003-01-10 20:17 bernlohr * cfg/: hess2/hess2.cfg (1.1), hess/flen3500_600m2_hex.dat (1.1), hess/large_smartpixel_camera.dat (1.1): Configuration for possible large HESS2 telescopes. 2003-01-10 18:56 bernlohr * common/sim_config.c (1.31): Proper updating of DC currents due to stars in convergent mode. 2003-01-10 16:19 bernlohr * hess/sim_conv2hess.c (1.36): Bug fixed in position of Hillas ellipse when source position is off-center. 2003-01-02 15:37 bernlohr * cfg/hess/hess.cfg (1.9), hess.cfg-example (1.3), cfg/hess/hess_bestguess.cfg (1.7), hess/Makefile.hess (1.35): Change configuration such that best-guess parameters are more easy to use by default. 2002-12-18 17:26 bernlohr * common/mc_aux.h (1.30), common/sim_telarray.c (1.30), hess/sim_conv2hess.c (1.35): Add the number of photons received around 400 nm. 2002-12-18 17:25 bernlohr * hess/smartpix.cc (1.2): Improved flexibility in camera definition. 2002-12-18 17:22 bernlohr * corsika/atmo.c (1.6): Finer interpolation mesh with FAST_INTERPOLATION method. 2002-12-18 17:18 bernlohr * doc_src/sim_hessarray.tex (1.28): Minor updates to documentation. 2002-12-18 17:17 bernlohr * common/sim_config.c (1.30): The '-' command line argument (input from standard input) was broken for quite a while. 2002-11-21 19:15 bernlohr * cfg/hess/hess_bestguess.cfg (1.6): Offer the 8-broken-drawers camera configuration via preprocessor definition. 2002-10-31 22:36 bernlohr * hess/: Makefile.hess (1.34), hess_defaults.h (1.32), sim_conv2hess.c (1.34): MC run header now containing user@host, sim_hessarray version (time). Makefile includes Athlon-specific optimization flags. 2002-10-19 16:53 bernlohr * cfg/hess2/largetel.cfg (1.3, prod-3-initial): Adapt NSB and threshold. 2002-10-19 12:14 bernlohr * common/sim_config.c (1.29), doc_src/sim_hessarray.tex (1.27), hess/Makefile.hess (1.33): Add -V option for reporting auto-generated version string. 2002-10-19 11:46 bernlohr * cfg/hess/: hesscam1536.dat (1.1), huge_dish_flen3450.dat (1.1), large_dish_flen3500.dat (1.1): Check-in of configuration data for a possible large telescope. 2002-10-19 11:44 bernlohr * hess/sim_conv2hess.c (1.33): Ntuple-like log output (lines starting with '@') more complete. 2002-10-19 11:43 bernlohr * doc_src/sim_hessarray.tex (1.26): Documentation updated. 2002-10-19 11:43 bernlohr * cfg/hess2/largetel.cfg (1.2): Configuration for a possible large telescope adapted to default config. 2002-10-15 18:40 bernlohr * cfg/hess/hess_bestguess.cfg (1.5), common/mc_aux.h (1.29), common/sim_config.c (1.28), common/sim_signal.c (1.12), doc_src/sim_hessarray.tex (1.25), hess/hess_defaults.h (1.31): Enable minimum signal sum over threshold for sector comparator and allow for other sector thresholds than 0.5 below nominal multiplicity. 2002-10-06 16:56 bernlohr * corsika/: GNUmakefile (1.11), Makefile.dist (1.15): Makefile update for improved gcc version recognition. 2002-10-06 16:55 bernlohr * common/sim_signal.c (1.11): Better handling of calibration parameters of pixels turned off. 2002-10-06 16:53 bernlohr * hess/sim_conv2hess.c (1.32): Add PS images of HV, NSB, and trigger enabled at the beginning of a PS file. 2002-10-06 16:51 bernlohr * doc_src/sim_hessarray.tex (1.24): Update for MC_ONLY_TRIGGERED_showers keyword alias. 2002-10-06 16:47 bernlohr * hess/hess_defaults.h (1.30): Add MC_ONLY_TRIGGERED_showers keyword as an alias to the difficult to remember IGNORE_NONTRIGgered_showers keyword. 2002-10-01 20:24 bernlohr * common/mc_aux.h (1.28), common/sim_config.c (1.27), common/sim_histograms.c (1.9), common/sim_imaging.c (1.15), common/sim_signal.c (1.10), common/sim_telarray.c (1.29), hess/Makefile.hess (1.32), hess/hesspix2.c (1.5), hess/hesspix3.c (1.1), hess/sim_conv2hess.c (1.31): Allow for pixels turned off in camera configuration. Write basic histograms without event weights also to the output file at the end of the job. 2002-10-01 20:22 bernlohr * cfg/hess/: hess_camera_8broken.dat (1.1), hess_camera_8broken_25mrad.dat (1.1): Added camera configuration with pixels in 8 drawers turned off. 2002-10-01 20:21 bernlohr * cfg/hess/hess_bestguess.cfg (1.4): Updating our best-guess configuration. 2002-09-19 18:29 bernlohr * cfg/hess/hess_camera_halftrg.dat (1.1): Add camera configuration with the inner half of the pixels in the trigger. 2002-08-25 17:18 bernlohr * Makefile.doxygen (1.2): Event with errors in the TeX files, try the best to create PS/PDF files. 2002-08-25 16:46 bernlohr * common/mc_aux.h (1.27), common/rndm2.h (1.3), common/sim_config.c (1.26), common/sim_telarray.c (1.28), doc_src/sim_hessarray.tex (1.23), hess/Makefile.hess (1.31), hess/hess_defaults.h (1.29): Add cut in number of photoelectrons. 2002-08-25 16:45 bernlohr * cfg/hess/: hess.cfg (1.8), hess_bestguess.cfg (1.3): Preprocessor commands must start at column 1. Add thresholds in millivolts and cut in number of photoelectrons. 2002-08-08 12:34 bernlohr * Makefile.doxygen (1.1), hess/Makefile.hess (1.30): Doxygen 1.2.17 does not generate PS file any more with its generated Makefile. Use our own Makefile for it. 2002-08-08 12:18 bernlohr * common/sim_telarray.c (1.27): Seeking the event end block should not be needed with current CORSIKA. 2002-08-08 11:59 bernlohr * doc_src/sim_hessarray.tex (1.22): Modification date 2002-08-08 11:58 bernlohr * common/sim_telarray.c (1.26): Fixed bug which may leed to rewinding large input files on 32 bit systems. 2002-08-02 17:46 bernlohr * doc_src/sim_hessarray.tex (1.21): Documentation typo fixed. 2002-08-02 17:41 bernlohr * common/mc_aux.h (1.26), common/sim_config.c (1.25), common/sim_telarray.c (1.25), doc_src/sim_hessarray.tex (1.20), hess/hess_defaults.h (1.28): Random number generator may be auto-initialized. Default configuration updated. 2002-08-02 16:21 bernlohr * cfg/hess/hess_bestguess.cfg (1.2): Added conversion of amplitude at comparator to milli-Volts. 2002-08-02 15:58 bernlohr * hess/Makefile.hess (1.29): Export extra files. 2002-08-02 15:56 bernlohr * common/: absorb.h (1.1), mc_aux.h (1.25), sim_absorb.c (1.6): Allow compiling the absorption example alone in CORSIKA. 2002-08-02 15:55 bernlohr * hess.cfg-example (1.2), cfg/hess/hess_bestguess.cfg (1.1), cfg/hess/hess_compare.cfg (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess2/largetel.cfg (1.1): Keep track of several configuration variants. 2002-07-25 18:58 bernlohr * hess/: Makefile.hess (1.28), hesspix2.c (1.4), sim_conv2hess.c (1.30): Note that pulse shapes at comparator were renamed. The camera configuration generator program now includes and angle range for pixels in the trigger. A bug in the output generation was fixed, where the output file was opened once for every output file, leeding to output file corruption. 2002-07-25 18:55 bernlohr * doc_src/: sim_hessarray.tex (1.19), fig/disc_shape.eps (1.2, prod6beta1, prod5, prod-3-initial), fig/disc_shape.pdf (1.2, prod6beta1, prod5, prod-3-initial), fig_src/disc_shape.fig (1.2, prod6beta1, prod5, prod-3-initial): Note that pulse shapes at comparator were renamed. 2002-07-25 18:52 bernlohr * common/: mc_aux.h (1.24), sim_config.c (1.24), sim_histograms.c (1.8), sim_signal.c (1.9), sim_telarray.c (1.24): Several minor bugfixes and more flexible histogram ranges. 2002-07-25 18:51 bernlohr * cfg/hess/: hess_camera_25mrad.dat (1.1), hess_camera_30mrad.dat (1.1): Two variants of the camera configuration different only in the selection of pixels included in the trigger. 2002-07-25 18:51 bernlohr * cfg/hess/hess.cfg (1.7): Configuration more flexible now. Old amplitude scale was wrong by factor of 2. 2002-07-04 18:11 bernlohr * common/mc_aux.h (1.23), common/sim_config.c (1.23), common/sim_telarray.c (1.23), hess/hess_defaults.h (1.27): Make the size limit for I/O buffers configurable. 2002-07-04 17:20 bernlohr * corsika/: GNUmakefile (1.10), Makefile.dist (1.14), corsika.dox (1.2): Changes for finding the proper compiler flags etc. 2002-05-28 12:03 bernlohr * corsika/: README (1.10), README.tex (1.5): Minor docu updates. 2002-05-28 12:02 bernlohr * corsika/Makefile.dist (1.13): Update version and use dvips with -o option. 2002-05-28 12:01 bernlohr * corsika/: iact.c (1.11), iact_full5.c (1.11): After some bug hunting, it seems to have been a hardware problem. 2002-05-28 12:00 bernlohr * corsika/GNUmakefile (1.9): Adapted for gcc 3.1 (cope with long reply to --version and add athlon optimization). 2002-05-23 17:49 bernlohr * hess/hess_defaults.h (1.26), doc_src/sim_hessarray.tex (1.18): Default values for point-spread function adapted to measurements on CT3 in Namibia. 2002-05-21 13:53 bernlohr * doc_src/sim_hessarray.tex (1.17): Reflect changes of a few default parameters. 2002-05-21 13:34 bernlohr * hess/hess_defaults.h (1.25): Parameters for mirror alignment and quality adapted to measurements in Namibia. 2002-05-21 13:32 bernlohr * hess/sim_conv2hess.c (1.29): Additional arguments to write_tel_photons added. 2002-05-13 19:15 bernlohr * hess/sim_conv2hess.c (1.28): Silly typo. 2002-04-30 19:46 bernlohr * corsika/: Makefile.dist (1.12), cmz_extract (1.7), iact.c (1.10), iact_full5.c (1.10): Adapt to CORSIKA verions 6.015 2002-04-29 18:48 bernlohr * doc_src/sim_hessarray.tex (1.16): Mention new IMAGING_LIST configuration keyword. 2002-04-29 18:23 bernlohr * hess/sim_conv2hess.c (1.27): Notify that new data will be appended to existing file (but probably no one will read that anyway). 2002-04-29 18:22 bernlohr * hess/hess_defaults.h (1.24): New IMAGING_LIST keyword instead of environment variable. 2002-04-29 18:20 bernlohr * common/sim_config.c (1.22): No need for IMAGING_LIST env var any more, use configuration instead. 2002-04-17 21:07 bernlohr * hess/Makefile.hess (1.27): [no log message] 2002-04-17 20:36 bernlohr * common/mc_aux.h (1.22), doc_src/sim_hessarray.tex (1.15), hess/Makefile.hess (1.26), hess/hess_defaults.h (1.23): Now using larger limits by default, unless HESS_PHASE_1 is defined. 2002-04-17 19:42 bernlohr * doc_src/sim_hessarray.tex (1.14): Added chapter on sim_hessarray compilation options. 2002-04-17 19:41 bernlohr * common/mc_aux.h (1.21): Minor change. 2002-04-17 18:28 bernlohr * hess/: Makefile.hess (1.25), hess_defaults.h (1.22), sim_conv2hess.c (1.26): Make LARGE_TELESCOPE etc. now the default setting for compilation. 2002-04-17 18:24 bernlohr * doc_src/sim_hessarray.tex (1.13): [no log message] 2002-03-22 19:03 bernlohr * hess/Makefile.hess (1.24): The sim_hessarray_doc.tar.gz file includes only HTML documentation now. 2002-03-22 18:52 bernlohr * doc_src/sim_hessarray.tex (1.12): Parameter 'CHANNELS_PER_CHIP' added to documentation. 2002-03-22 18:42 bernlohr * hess/: Makefile.hess (1.23), hess_defaults.h (1.21): Improved rules to build documentation in Makefile. Addes 'CHANNELS_PER_CHIP' parameter to hess_defaults.h. 2002-03-22 18:40 bernlohr * doc_src/sim_hessarray.tex (1.11): More accurate description of camera definition files. 2002-03-22 18:40 bernlohr * corsika/: Makefile.dist (1.11), cmz_extract (1.6): Adapt to CORSIKA version 6.014. 2002-03-22 18:39 bernlohr * common/: mc_aux.h (1.20), sim_config.c (1.21), sim_imaging.c (1.14), sim_signal.c (1.8), sim_telarray.c (1.22): Allow for unspecified number of pixels required for a telescope trigger; use TRIGGER_PIXELS parameter to specify it. The drawer, board and channel numbers from the camera definition are now read in (conversion code was in place long ago). 2002-03-22 18:37 bernlohr * cfg/hess/: hess_camera.dat (1.2), hess_camera_73.dat (1.2), smartpixel_camera.dat (1.2): Allow for unspecified number of pixels required for a telescope trigger; use TRIGGER_PIXELS parameter to specify it. 2002-03-08 19:33 bernlohr * doc_src/sim_hessarray.tex (1.10): Typo fixed. 2002-03-08 19:31 bernlohr * common/mc_aux.h (1.19), common/sim_config.c (1.20), common/sim_signal.c (1.7), doc_src/sim_hessarray.tex (1.9), hess/hess_defaults.h (1.20): Minimum integrated signal over threshold added to mimimum time over threshold method for simulating the comparator response. 2002-02-26 12:06 bernlohr * common/sim_config.c (1.19), doc_src/sim_hessarray.tex (1.8), hess/hess_defaults.h (1.19), hess/hesspix2.c (1.3), hess/sim_conv2hess.c (1.25): More fixes for larger cameras. 2002-02-25 19:14 bernlohr * common/mc_aux.h (1.18), common/sim_config.c (1.18), common/sim_imaging.c (1.13), hess/hess_defaults.h (1.18): Allow for parabolic shape of dish and allow to override MAX_MIRRORS etc. 2002-02-19 20:21 bernlohr * hess/Makefile.hess (1.22): More tweaks for properly building the documentation. 2002-02-19 19:16 bernlohr * doc_src/sim_hessarray.tex (1.7): Hyperlinks removed for Postscript version of the documentation due to printing problems. 2002-02-19 18:19 bernlohr * hess/Makefile.hess (1.21): Fixed a little typo. 2002-02-19 18:11 bernlohr * common/mc_aux.h (1.17), common/sim_imaging.c (1.12), hess/sim_conv2hess.c (1.24): Write Postscript camera images also for circular and square pixels. 2002-02-19 13:08 bernlohr * hess/: Makefile.hess (1.20), hess_defaults.h (1.17), smartpix.cc (1.1): Add program creating Smart Pixel camera definition. 2002-02-19 13:07 bernlohr * doc_src/: iact3d.eps (1.2), iact3d.jpg (1.2), sim_hessarray.tex (1.6), fig/camera.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/camera.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/disc_shape.eps (1.1), fig/disc_shape.pdf (1.1), fig/funnel.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/funnel.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_mirrors_fig.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_mirrors_fig.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_qe2.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_qe2.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_trans_10km.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_trans_10km.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/hess_trans_10km.png (1.1, prod6beta1, prod5, prod-3-initial), fig/iact3d.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/iact3d.jpg (1.1, prod6beta1, prod5, prod-3-initial), fig/reflect.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/reflect.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/shadow.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/shadow.jpg (1.1, prod6beta1, prod5, prod-3-initial), fig/shadow.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig/spe_hess.eps (1.1, prod6beta1, prod5, prod-3-initial), fig/spe_hess.pdf (1.1, prod6beta1, prod5, prod-3-initial), fig_src/disc_shape.fig (1.1), fig_src/funnel.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/hess_qe2.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/hess_trans_10km.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/new_hess_mirror_0deg_2.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/reflect.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/shadow.fig (1.1, prod6beta1, prod5, prod-3-initial), fig_src/shadow.png (1.1, prod6beta1, prod5, prod-3-initial), fig_src/spe_hess.fig (1.1, prod6beta1, prod5, prod-3-initial): Documentation was substantially enlarged. Figures added into separate directory. 2002-02-19 13:06 bernlohr * corsika/: corsika.dox (1.1), remove_extension (1.1, prod-3-initial, Release_1_40): Add files missing from CVS so far. 2002-02-19 13:06 bernlohr * common/: mc_aux.h (1.16), sim_config.c (1.17), sim_imaging.c (1.11): Modifications for optional explicit shadowing by masts etc. 2002-02-19 13:05 bernlohr * cfg/hess/: hess_disc_shape-01-10.dat (1.1, prod6beta1, prod5, prod-3-initial), hess_masts.dat (1.1), hess_mirrors.dat (1.3), hess_spe.dat (1.3, prod6beta1, prod5, prod-3-initial), qe_xp2960_hd.tbl (1.1, prod6beta1, prod5, prod-3-initial), smartpixel_camera.dat (1.1): Two mirrors commented out. Add files missing from CVS so far. 2002-02-19 13:04 bernlohr * check_changed (1.1, prod6beta1, prod5, prod-3-initial): A little script checking what files are not yet in cvs or have changed. 2002-01-18 16:19 bernlohr * util/Makefile (1.2): Include Makefile.makedepend now. 2002-01-18 16:18 bernlohr * hess/Makefile.hess (1.19): Postprocessing of dependencies list fixed. 2002-01-04 20:39 bernlohr * corsika/: GNUmakefile (1.8), Makefile.dist (1.10), README (1.9), README.tex (1.4), cmz_extract (1.5): Adapting for CORSIKA version 6.010. 2002-01-02 16:26 bernlohr * common/sim_config.c (1.16): Command line options did not override configuration file but vice versa. 2001-10-26 15:01 bernlohr * hess/: Makefile.hess (1.18), sim_conv2hess.c (1.23): Added Xmax and hmax to list output. 2001-10-26 14:59 bernlohr * hegra/Makefile.hegra (1.2, prod6beta1, prod5, prod-3-initial): An incomplete attempt to adapt the HEGRA Makefile to the current source structure. 2001-10-26 14:58 bernlohr * common/sim_telarray.c (1.21): Fixed the automatically determined source azimuth. 2001-10-09 17:10 bernlohr * common/sim_config.c (1.15), common/sim_histograms.c (1.7), common/sim_telarray.c (1.20), hess/sim_conv2hess.c (1.22): Taking source direction now from simulation unless specified otherwise. 2001-10-08 18:40 bernlohr * common/sim_imaging.c (1.10): Bug fixed in offset_in_camera(). 2001-10-08 17:07 bernlohr * hess/: hess_defaults.h (1.16), rec_tools.c (1.5), sim_conv2hess.c (1.21): Assumed scattering and errors in telescope directions were too large. Print Hillas parameters for now to tandard output. 2001-10-08 17:05 bernlohr * corsika/: GNUmakefile (1.7), README (1.8), README.tex (1.3): Updated for release 1.12. 2001-10-08 17:04 bernlohr * common/sim_imaging.c (1.9): Function offset_in_camera gets angles in degrees. 2001-09-20 17:16 bernlohr * corsika/: GNUmakefile (1.6), Makefile.dist (1.9), README (1.7), README.tex (1.2), cmz_extract (1.4), iact.c (1.9), iact_full5.c (1.9): Minor bugfixes in Makefiles and easier building of versions with extended IACT interface. 2001-09-18 17:20 bernlohr * corsika/: GNUmakefile (1.5), Makefile (1.8), Makefile.dist (1.8), README (1.6), iact.c (1.8): straux.c and straux.h were missing from distribution and normal build. 2001-09-14 20:05 bernlohr * doc_src/sim_hessarray.tex (1.5): With convergent viewing now. 2001-09-14 20:01 bernlohr * common/mc_aux.h (1.15), common/sim_config.c (1.14), common/sim_telarray.c (1.19), hess/hess_defaults.h (1.15), hess/sim_conv2hess.c (1.20): With convergent viewing now. 2001-09-14 12:34 bernlohr * hess/sim_conv2hess.c (1.19): Convert CORSIKA primary particle ID to 'unified' scheme. Add mirror area including projection factor to camera settings. 2001-09-14 12:33 bernlohr * corsika/iact_full5.c (1.8): [no log message] 2001-09-14 12:31 bernlohr * common/: mc_aux.h (1.14), sim_config.c (1.13), sim_imaging.c (1.8), sim_telarray.c (1.18): Converting CORSIKA primary particle ID to 'unified' scheme now. Add mirror total area including projection factor to camera settings. 2001-08-22 19:20 bernlohr * common/mc_aux.h (1.13), common/sim_config.c (1.12), common/sim_telarray.c (1.17), doc_src/sim_hessarray.tex (1.4), hess/hess_defaults.h (1.14), hess/sim_conv2hess.c (1.18): Added two options 'IGNORE_NONTRIGgered_telescopes' and 'IGNORE_MC_DATA' that allow to reduce the amount of or even skip all Monte Carlo data in the output. 2001-08-22 19:18 bernlohr * cfg/hess/hess.cfg (1.6): Activate option to ignore telescopes with very little light. This is a dramatic performance leap when most events are well below threshold. 2001-08-17 12:57 bernlohr * hess/: Makefile.hess (1.17), sim_conv2hess.c (1.17): A number of further variables and shower profiles are now written to the output data. 2001-08-17 12:56 bernlohr * common/: mc_aux.h (1.12), sim_absorb.c (1.5), sim_config.c (1.11), sim_telarray.c (1.16): The atmosphere-specific parts is now handled by the same atmo.c as in the CORSIKA iact/atmo package. A number of further variables and shower profiles are now written to the output data. 2001-08-16 18:11 bernlohr * Makefile (1.2): Makefile only got into CVS by mistake. It is actually generated from hess/Makefile.hess. 2001-08-16 18:08 bernlohr * corsika/: GNUmakefile (1.4), Makefile (1.7), Makefile.dist (1.7), atmo.c (1.5), atmo.h (1.1): The 'atmo.c' file was modified to make it usable both from CORSIKA and from sim_telarray. 2001-08-15 20:58 bernlohr * hess/sim_conv2hess.c (1.16): Fixes for missing variables in output data. 2001-08-15 20:58 bernlohr * Makefile (1.1), hess.cfg-example (1.1), sim_hessarray.dox (1.2): Add files missing from CVS and change to documentation. 2001-08-14 00:51 bernlohr * corsika/: GNUmakefile (1.3), Makefile (1.6), Makefile.dist (1.6), README (1.5), README.stub (1.1, prod6beta1, prod5, prod-3-initial, Release_1_40), README.tex (1.1): Updated documentation. The primary source of documentation is now README.tex and the file README is generated from README.tex. 2001-07-23 23:05 bernlohr * corsika/Makefile.dist (1.5): Distribute doxygen generated documentation under a more specific name. 2001-07-23 22:27 bernlohr * corsika/: iact.c (1.7), iact_full5.c (1.7): Bug fix for modifying CORSIKA EVTH. 2001-07-23 20:57 bernlohr * corsika/: iact.c (1.6), iact_full5.c (1.6): Typo fixed. 2001-07-23 20:45 bernlohr * corsika/: Makefile.dist (1.4), atmo.c (1.4), iact.c (1.5), iact_full5.c (1.5): Write random offsets back to CORSIKA event header. In order to take effect, the order of processing TELEVT() and OUTPUT(EVTH,..) in CORSIKA has to be changed. 2001-07-23 20:43 bernlohr * corsika/sim_skeleton.c (1.4): Documentation markup changed for doxygen. 2001-07-12 21:29 bernlohr * corsika/: GNUmakefile (1.2), Makefile (1.5): Bringing the GNUmakefile and the normal Makefile a bit more into line. 2001-07-12 21:21 bernlohr * corsika/: Makefile.dist (1.3), listio.c (1.5): Continue fixing distribution Makefile (Makefile.dist). Listio.c is no longer maintained in this directory. 2001-07-12 21:14 bernlohr * corsika/Makefile.dist (1.2): Fixed rules for setting up symbolic links to files outside this directory. 2001-07-12 21:04 bernlohr * corsika/: GNUmakefile (1.1), Makefile (1.4), Makefile.dist (1.1), README (1.4), eventio_de.ps (1.4, prod6beta1, prod5, prod-3-initial, Release_1_40), eventio_en.ps (1.4, prod6beta1, prod5, prod-3-initial, Release_1_40), iact.c (1.4), iact_full5.c (1.4), listio.c (1.4), trapfpe.c (1.1, Release_1_40): Updated to latest distribution. Starting to convert remaining source-code documentation to doxygen format. 2001-07-10 19:22 bernlohr * common/fileopen.c (1.5), common/sim_config.c (1.10), common/sim_telarray.c (1.15), hess/Makefile.hess (1.16), hess/sim_conv2hess.c (1.15): With support for large files on 32-bit machines. 2001-07-10 19:05 bernlohr * hess/Makefile.hess (1.15): Bring hess/Makefile.hess into line with Makefile 2001-07-10 19:04 bernlohr * doc_src/sim_hessarray.tex (1.3): Add a few details on configuration keywords. 2001-07-10 19:03 bernlohr * common/sim_telarray.c (1.14): Retrieve the number of showers simulated from the run end and from CORSIKA input. 2001-06-28 14:56 bernlohr * hess/sim_conv2hess.c (1.14): Fixed bug in copying sampled raw data to HESS data structure. 2001-06-18 11:04 bernlohr * hess/sim_conv2hess.c (1.13): Using HI_GAIN (=0) and LO_GAIN (=1) to make it clearer which type of channel is meant in HESS data structures. 2001-06-18 11:03 bernlohr * common/sim_absorb.c (1.4): Allow for comments in the absorption table. 2001-05-31 11:44 bernlohr * cfg/hess/: atm_trans_1800_1_10_0_0_0.dat (1.1), atm_trans_1800_1_10_0_0_1800.dat (1.1), atm_trans_1800_1_1_0_0_0.dat (1.1), atm_trans_1800_1_1_0_0_1800.dat (1.1), atm_trans_1800_1_3_0_0_0.dat (1.1), atm_trans_1800_1_3_0_0_1800.dat (1.1), atm_trans_1800_1_4_0_0_0.dat (1.1), atm_trans_1800_1_4_0_0_1800.dat (1.1): Additional transmission models for rural (1), navy maritime (3), maritime (4), and desert (10) haze; all for ground at sea level and at 1800 m altitude. 2001-05-31 09:51 bernlohr * util/: Makefile (1.1), getword.c (1.1), pfp.c (1.1), tree.c (1.1), tree.h (1.1): Added the 'Portable Fortran Preprocessor' (pfp) to CVS. 2001-05-30 19:30 bernlohr * doc/index.html (1.3, prod6beta1, prod5, prod-3-initial), doc_src/sim_hessarray.tex (1.2): Minor update. 2001-05-30 14:34 bernlohr * hess/Makefile.hess (1.14): Updated rules for additional documentation. 2001-05-30 14:32 bernlohr * hess/Makefile.hess (1.13): Rules for additional documentation. 2001-05-30 14:32 bernlohr * doc_src/: iact3d.eps (1.1), iact3d.jpg (1.1), sim_hessarray.tex (1.1): Wrote additional documentation. 2001-05-30 14:31 bernlohr * doc/index.html (1.2): Updated to include additional documentation. 2001-05-18 16:59 bernlohr * hess/rec_tools.h (1.1): Already moved to hessio. 2001-05-18 16:56 bernlohr * common/ap_snprintf.c (1.1): Adding Apache snprintf implementation. 2001-05-18 16:50 bernlohr * cfg/hess/: hess_spe2.dat (1.2, prod6beta1, prod5, prod-3-initial), hess_spe_old.dat (1.2): New single photo-electron response has larger afterpulse rate. 2001-05-18 16:49 bernlohr * cfg/hess/hess.cfg (1.5), hess/rec_tools.c (1.4), hess/sim_conv2hess.c (1.12): ??? 2001-04-27 22:48 bernlohr * cfg/hess/hess_qe2.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_qe_xp2960.dat (1.2), cfg/hess/hess_qe_xp2960_stange.dat (1.2), cfg/hess/hess_qe_xp2960_strange.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_qe_xp2960_techprop.dat (1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_spe.dat (1.2), cfg/hess/hess_spe2.dat (1.1), cfg/hess/hess_spe_old.dat (1.1), hess/Makefile.hess (1.12), hess/hess_defaults.h (1.13): Updated configuration files. New defaults used for single photo-electron response (hess_spe2.dat) and for quantum efficiency (hess_qe2.dat). 2001-04-23 18:44 bernlohr * hess/Makefile.hess (1.11): Makefile now includes rules for building on DEC Unix. 2001-04-06 12:25 bernlohr * hess/Makefile.hess (1.10): Removed libhessio.a building and all of its source files. 2001-04-06 11:53 bernlohr * common/current.c (1.3), common/current.h (1.2), common/dhsort.c (1.4), common/dhsort.h (1.2), common/eventio.c (1.3), common/fileopen.h (1.3), common/hconfig.c (1.3), common/hconfig.h (1.2), common/histogram.c (1.4), common/histogram.h (1.3), common/history.h (1.2), common/initial.h (1.5), common/io_basic.h (1.4), common/io_histogram.c (1.4), common/io_histogram.h (1.2), common/io_history.c (1.3), common/io_history.h (1.2), common/io_simtel.c (1.6), common/mc_aux.h (1.11), common/mc_tel.h (1.5), common/sim_config.c (1.9), common/sim_telarray.c (1.13), common/straux.c (1.3), common/straux.h (1.3), common/warning.c (1.3), common/warning.h (1.3), hess/hess_defaults.h (1.12), hess/io_hess.c (1.8), hess/io_hess.h (1.7), hess/read_hess.c (1.4), hess/sim_conv2hess.c (1.11): Removed files also found in hessio repository. Included zero-suppression and data reduction. 2001-04-06 11:52 bernlohr * cfg/hess/hess.cfg (1.4): Removed files also found in hessio repository. 2001-02-25 16:14 bernlohr * common/io_simtel.c (1.5), common/mc_aux.h (1.10), common/sim_telarray.c (1.12), hess/io_hess.c (1.7), hess/io_hess.h (1.6), hess/sim_conv2hess.c (1.10): A number of changes for HESS output conversion, mostly units related. 2001-02-23 15:18 bernlohr * corsika/: Copyright (1.3), Makefile (1.3), README (1.3), atmo.c (1.3), cmz_extract (1.3), eventio_de.ps (1.3), eventio_en.ps (1.3), iact.c (1.3), iact3d.ps (1.3, prod6beta1, prod5, prod-3-initial, Release_1_40), iact_full5.c (1.3), listio.c (1.3), remove_extension.c (1.3, prod-3-initial, Release_1_40), sim_skeleton.c (1.3), src_cmnts.ps (1.3, prod6beta1, prod5, prod-3-initial, Release_1_40): CORSIKA extensions added again, this time omitting symbolic links. 2001-02-23 15:11 bernlohr * corsika/: Copyright (1.2), Makefile (1.2), README (1.2), atmo.c (1.2), atmprof1.dat (1.2), atmprof2.dat (1.2), atmprof3.dat (1.2), atmprof4.dat (1.2), atmprof5.dat (1.2), atmprof6.dat (1.2), atmprof9.dat (1.2), cmz_extract (1.2), eventio.c (1.2), eventio_de.ps (1.2), eventio_en.ps (1.2), iact.c (1.2), iact3d.ps (1.2), iact_full5.c (1.2), initial.h (1.2), io_basic.h (1.2), io_simtel.c (1.2), listio.c (1.2), mc_tel.h (1.2), remove_extension.c (1.2), sim_skeleton.c (1.2), src_cmnts.ps (1.2), testio.c (1.2), warning.c (1.2), warning.h (1.2): [no log message] 2001-02-23 15:08 bernlohr * cfg/hess/hess.cfg (1.3), common/hconfig.c (1.2), common/mc_aux.h (1.9), common/sim_config.c (1.8), common/sim_signal.c (1.6), common/sim_telarray.c (1.11), corsika/Copyright (1.1), corsika/Makefile (1.1), corsika/README (1.1), corsika/atmo.c (1.1), corsika/atmprof1.dat (1.1), corsika/atmprof2.dat (1.1), corsika/atmprof3.dat (1.1), corsika/atmprof4.dat (1.1), corsika/atmprof5.dat (1.1), corsika/atmprof6.dat (1.1), corsika/atmprof9.dat (1.1), corsika/cmz_extract (1.1), corsika/eventio.c (1.1), corsika/eventio_de.ps (1.1), corsika/eventio_en.ps (1.1), corsika/iact.c (1.1), corsika/iact3d.ps (1.1), corsika/iact_full5.c (1.1), corsika/initial.h (1.1), corsika/io_basic.h (1.1), corsika/io_simtel.c (1.1), corsika/listio.c (1.1), corsika/mc_tel.h (1.1), corsika/remove_extension.c (1.1), corsika/sim_skeleton.c (1.1), corsika/src_cmnts.ps (1.1), corsika/testio.c (1.1), corsika/warning.c (1.1), corsika/warning.h (1.1), hess/hess_defaults.h (1.11), hess/sim_conv2hess.c (1.9): Added sources of CORSIKA Cherenkov light extensions to sim_telarray source tree. 2001-01-15 17:49 bernlohr * cfg/: common/atmprof1.dat (1.1, prod6beta1, prod5), common/atmprof2.dat (1.1, prod6beta1, prod5), common/atmprof3.dat (1.1, prod6beta1, prod5), common/atmprof4.dat (1.1, prod6beta1, prod5), common/atmprof5.dat (1.1, prod6beta1, prod5), common/atmprof6.dat (1.1, prod6beta1, prod5), common/atmprof9.dat (1.1), hess/atmprof10.dat (1.1, prod6beta1, prod5), hess/atmprof11.dat (1.1, prod6beta1, prod5), hess/atmprof12.dat (1.1, prod6beta1, prod5), hess/hess_disc_shape_parismc.dat (1.1, prod6beta1, prod5) (utags: prod-3-initial): Include more data files in CVS. 2001-01-15 17:23 bernlohr * cfg/hess/hess.cfg (1.2), common/initial.h (1.4), common/mc_aux.h (1.8), common/sim_config.c (1.7), common/sim_histograms.c (1.6), common/sim_imaging.c (1.7), common/sim_signal.c (1.5), common/sim_telarray.c (1.10), hess/hess_defaults.h (1.10): Using now shape of discriminator/comparator output pulse. 2000-12-15 20:52 bernlohr * common/mc_aux.h (1.7), common/sim_config.c (1.6), common/sim_histograms.c (1.5), common/sim_imaging.c (1.6), common/sim_signal.c (1.4), common/sim_telarray.c (1.9), hess/Makefile.hess (1.9), hess/hess_defaults.h (1.9): First part of modifications for convergent viewing. 2000-12-07 19:58 bernlohr * common/straux.c (1.2): Synchronized with hconfig. 2000-12-07 19:52 bernlohr * common/config.c (1.3), common/config.h (1.2), common/current.c (1.2), common/eventio.c (1.2), common/hconfig.c (1.1), common/hconfig.h (1.1), common/histogram.c (1.3), common/initial.h (1.3), common/io_basic.h (1.3), common/io_histogram.c (1.3), common/io_histogram.h (1.1), common/io_history.c (1.2), common/mc_aux.h (1.6), common/sim_config.c (1.5), common/sim_histograms.c (1.4), common/sim_imaging.c (1.5), common/sim_telarray.c (1.8), common/straux.h (1.2), common/warning.c (1.2), common/warning.h (1.2), hess/Makefile.hess (1.8), hess/hess_defaults.h (1.8): Synchronized with hconfig. Now using hconfig instead of config. 2000-12-07 16:34 bernlohr * sim_hessarray.dox (1.1), common/dhsort.c (1.3), doc/iact3d.png (1.1, prod6beta1, prod5, prod-3-initial), doc/index.html (1.1): Documentation updates. 2000-12-03 16:22 bernlohr * common/rndm2.c (1.2), common/rndm2.h (1.2), common/testio.c (1.2), common/wrgif.c (1.2), hess/hess_defaults.h (1.7), hess/hesspix.c (1.2), hess/hesspix2.c (1.2), hess/read_hess.c (1.3), hess/rec_tools.c (1.3), hess/sim_conv2hess.c (1.8), hess/testrec.c (1.2, prod6beta1, prod5, prod-3-initial): Documentation updates 2000-12-01 22:16 bernlohr * cfg/hess/hess_mirrors.dat (1.2), common/dhsort.c (1.2), common/fileopen.c (1.4), common/histogram.c (1.2), common/histogram.h (1.2), common/io_histogram.c (1.2), common/sim_telarray.c (1.7), hess/hess_defaults.h (1.6): Dcoumentation updates 2000-12-01 17:42 bernlohr * common/sim_histograms.c (1.3): histogram limit changes 2000-11-27 16:23 bernlohr * hess/: io_hess.c (1.6), io_hess.h (1.5), sim_conv2hess.c (1.7): Documentation updates and new convergence reference position in io_hess. 2000-11-24 21:06 bernlohr * common/rndm_table.c (1.2), common/sim_config.c (1.4), common/sim_imaging.c (1.4), common/sim_signal.c (1.3), common/sim_telarray.c (1.6), hess/sim_conv2hess.c (1.6): Documentation updates. Fixed a bug in rndm_tables for non-equidistant tables. 2000-11-20 14:01 bernlohr * cfg/hess/hess.cfg (1.1): Added configuration file for next MC comparison. 2000-11-20 14:00 bernlohr * cfg/hess/hess_camera_73.dat (1.1), cfg/hess/hess_funnels_73.dat (1.1, prod6beta1, prod5, prod-3-initial), common/io_history.h (1.1), common/io_simtel.c (1.4), common/mc_aux.h (1.5), common/sim_histograms.c (1.2), common/sim_telarray.c (1.5), hess/Makefile.hess (1.7), hess/hess_defaults.h (1.5), hess/io_hess.c (1.5), hess/rec_tools.c (1.2), hess/sim_conv2hess.c (1.5): Added configuration data for next MC comparison. Added more reconstructed data and more histograms. 2000-11-10 16:53 bernlohr * common/fileopen.c (1.3), common/fileopen.h (1.2), common/io_simtel.c (1.3), common/mc_aux.h (1.4), common/mc_tel.h (1.4), common/sim_absorb.c (1.3), common/sim_imaging.c (1.3), common/sim_telarray.c (1.4), hess/Makefile.hess (1.6), hess/hess_defaults.h (1.4), hess/io_hess.c (1.4), hess/io_hess.h (1.4), hess/sim_conv2hess.c (1.4): Documentation updates. 2000-11-10 15:08 bernlohr * common/fileopen.c (1.2), common/io_simtel.c (1.2), common/mc_aux.h (1.3), common/mc_tel.h (1.3), common/sim_config.c (1.3), common/sim_telarray.c (1.3), hess/Makefile.hess (1.5), hess/hess_defaults.h (1.3), hess/io_hess.c (1.3), hess/io_hess.h (1.3), hess/read_hess.c (1.2), hess/sim_conv2hess.c (1.3): Documentation update 2000-11-07 18:07 bernlohr * common/config.c (1.2), common/fileopen.c (1.1), common/fileopen.h (1.1), common/initial.h (1.2), common/mc_aux.h (1.2), common/sim_absorb.c (1.2), common/sim_config.c (1.2), common/sim_imaging.c (1.2), common/sim_signal.c (1.2), common/sim_telarray.c (1.2), hess/Makefile.hess (1.4): Directory restructuring now done. Makefile updated for the HESS part. Configuration data file can now be found in include path. The HEGRA part has not been tried and would certainly not compile/link. 2000-11-06 20:17 bernlohr * hess/Makefile.hess (1.3), hess/io_hess.c (1.2), hess/io_hess.h (1.2), hess/sim_conv2hess.c (1.2), common/io_basic.h (1.2), common/mc_tel.h (1.2): Writing HESS MC event reorganized to include photons and photo-electron lists. Started reorganizing directory structure. Modifications to Makefiles are needed before compilation works in this new organisation. 2000-11-05 17:10 bernlohr * Copyright (1.1), hess/Makefile.hess (1.2): atmospheric transmission table has symbolic name. Copyright was missing. 2000-11-05 17:03 bernlohr * hess/hess_defaults.h (1.2): changed pixel noise rate to 100 MHz (see S. Preuss, diploma thesis) 2000-11-05 16:51 tag start 2000-11-05 16:51 bernlohr * cfg/common/atm_profile_model_1.dat (1.1), cfg/common/atm_profile_model_2.dat (1.1), cfg/common/atm_profile_model_3.dat (1.1), cfg/common/atm_profile_model_4.dat (1.1), cfg/common/atm_profile_model_5.dat (1.1), cfg/common/atm_profile_model_6.dat (1.1), cfg/hegra/atmo_trans_hegra.dat (1.1), cfg/hegra/hegra_disc_shape.dat (1.1), cfg/hegra/hegra_fadc_shape.dat (1.1), cfg/hegra/hegra_qe.dat (1.1), cfg/hegra/hegra_qe2.dat (1.1), cfg/hegra/hegra_qe3.dat (1.1), cfg/hegra/hegra_reflect.dat (1.1), cfg/hegra/hegra_spe.dat (1.1), cfg/hess/atm_trans_1800_1_4_0_0.dat (1.1), cfg/hess/hess_camera.dat (1.1), cfg/hess/hess_disc_shape_slow.dat (1.1), cfg/hess/hess_fadc_shape.dat (1.1), cfg/hess/hess_funnels.dat (1.1), cfg/hess/hess_mirrors.dat (1.1), cfg/hess/hess_qe.dat (1.1), cfg/hess/hess_qe_sasha.dat (1.1), cfg/hess/hess_qe_test.dat (1.1), cfg/hess/hess_qe_xp2960.dat (1.1), cfg/hess/hess_qe_xp2960_stange.dat (1.1), cfg/hess/hess_reflect.dat (1.1), cfg/hess/hess_spe.dat (1.1), common/config.c (1.1), common/config.h (1.1), common/current.c (1.1), common/current.h (1.1), common/dhsort.c (1.1), common/dhsort.h (1.1), common/eventio.c (1.1), common/histogram.c (1.1), common/histogram.h (1.1), common/history.h (1.1), common/initial.h (1.1), common/io_basic.h (1.1), common/io_histogram.c (1.1), common/io_history.c (1.1), common/io_pixel.c (1.1), common/io_simtel.c (1.1), common/mc_aux.h (1.1), common/mc_tel.h (1.1), common/rndm2.c (1.1), common/rndm2.h (1.1), common/rndm_table.c (1.1), common/sim_absorb.c (1.1), common/sim_config.c (1.1), common/sim_histograms.c (1.1), common/sim_imaging.c (1.1), common/sim_signal.c (1.1), common/sim_telarray.c (1.1), common/straux.c (1.1), common/straux.h (1.1), common/testio.c (1.1), common/warning.c (1.1), common/warning.h (1.1), common/wrgif.c (1.1), hegra/Makefile.hegra (1.1), hegra/ctformat.h (1.1), hegra/hegra_defaults.h (1.1), hegra/initmemory.c (1.1), hegra/mix_amps.c (1.1), hegra/sim_conv2ct.h (1.1), hegra/sim_conv2hegra.c (1.1), hegra/sys_event_param.h (1.1), hegra/telenergy.c (1.1), hess/Makefile.hess (1.1), hess/hess_defaults.h (1.1), hess/hesspix.c (1.1), hess/hesspix2.c (1.1), hess/io_hess.c (1.1), hess/io_hess.h (1.1), hess/read_hess.c (1.1), hess/rec_tools.c (1.1), hess/sim_conv2hess.c (1.1), hess/testrec.c (1.1): Initial revision 2000-11-05 16:51 bernlohr * cfg/common/atm_profile_model_1.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/common/atm_profile_model_2.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/common/atm_profile_model_3.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/common/atm_profile_model_4.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/common/atm_profile_model_5.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/common/atm_profile_model_6.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/atmo_trans_hegra.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_disc_shape.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_fadc_shape.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_qe.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_qe2.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_qe3.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_reflect.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hegra/hegra_spe.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/atm_trans_1800_1_4_0_0.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_camera.dat (1.1.1.1), cfg/hess/hess_disc_shape_slow.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_fadc_shape.dat (1.1.1.1), cfg/hess/hess_funnels.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_mirrors.dat (1.1.1.1), cfg/hess/hess_qe.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_qe_sasha.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_qe_test.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_qe_xp2960.dat (1.1.1.1), cfg/hess/hess_qe_xp2960_stange.dat (1.1.1.1), cfg/hess/hess_reflect.dat (1.1.1.1, prod6beta1, prod5, prod-3-initial), cfg/hess/hess_spe.dat (1.1.1.1), common/config.c (1.1.1.1), common/config.h (1.1.1.1), common/current.c (1.1.1.1), common/current.h (1.1.1.1), common/dhsort.c (1.1.1.1), common/dhsort.h (1.1.1.1), common/eventio.c (1.1.1.1), common/histogram.c (1.1.1.1), common/histogram.h (1.1.1.1), common/history.h (1.1.1.1), common/initial.h (1.1.1.1), common/io_basic.h (1.1.1.1), common/io_histogram.c (1.1.1.1), common/io_history.c (1.1.1.1), common/io_pixel.c (1.1.1.1), common/io_simtel.c (1.1.1.1), common/mc_aux.h (1.1.1.1), common/mc_tel.h (1.1.1.1), common/rndm2.c (1.1.1.1), common/rndm2.h (1.1.1.1), common/rndm_table.c (1.1.1.1), common/sim_absorb.c (1.1.1.1), common/sim_config.c (1.1.1.1), common/sim_histograms.c (1.1.1.1), common/sim_imaging.c (1.1.1.1), common/sim_signal.c (1.1.1.1), common/sim_telarray.c (1.1.1.1), common/straux.c (1.1.1.1), common/straux.h (1.1.1.1), common/testio.c (1.1.1.1), common/warning.c (1.1.1.1), common/warning.h (1.1.1.1), common/wrgif.c (1.1.1.1), hegra/Makefile.hegra (1.1.1.1), hegra/ctformat.h (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/hegra_defaults.h (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/initmemory.c (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/mix_amps.c (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/sim_conv2ct.h (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/sim_conv2hegra.c (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/sys_event_param.h (1.1.1.1, prod6beta1, prod5, prod-3-initial), hegra/telenergy.c (1.1.1.1, prod6beta1, prod5, prod-3-initial), hess/Makefile.hess (1.1.1.1), hess/hess_defaults.h (1.1.1.1), hess/hesspix.c (1.1.1.1), hess/hesspix2.c (1.1.1.1), hess/io_hess.c (1.1.1.1), hess/io_hess.h (1.1.1.1), hess/read_hess.c (1.1.1.1), hess/rec_tools.c (1.1.1.1), hess/sim_conv2hess.c (1.1.1.1), hess/testrec.c (1.1.1.1) (utags: start): initial import into CVS